3 March 2017 Analysis and reduction of phase errors caused by nonuniform surface reflectivity in a phase-shifting measurement system
Author Affiliations +
Abstract
The measurement accuracy of a phase-shifting measurement system is adversely affected by phase errors. This paper presents a theoretical analysis of phase errors caused by nonuniform surface reflectivity, such as varying reflectivity and a sharp change in reflectivity. Based on the analysis, a method to adaptively adjust the maximum input gray level of each pixel in projected fringe patterns to the local reflectivity was proposed to reduce phase errors. Experimental results for a planar checkerboard show that the measurement error can be reduced by 56.6% by using the proposed method.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Songlin Chen, Songlin Chen, Renbo Xia, Renbo Xia, Jibin Zhao, Jibin Zhao, Hongyao Zhang, Hongyao Zhang, Maobang Hu, Maobang Hu, } "Analysis and reduction of phase errors caused by nonuniform surface reflectivity in a phase-shifting measurement system," Optical Engineering 56(3), 033102 (3 March 2017). https://doi.org/10.1117/1.OE.56.3.033102 . Submission: Received: 27 October 2016; Accepted: 9 February 2017
Received: 27 October 2016; Accepted: 9 February 2017; Published: 3 March 2017
JOURNAL ARTICLE
9 PAGES


SHARE
RELATED CONTENT


Back to Top