29 June 2017 Scatter measurement and correction method for cone-beam CT based on single grating scan
Author Affiliations +
In cone-beam computed tomography (CBCT) systems based on flat-panel detector imaging, the presence of scatter significantly reduces the quality of slices. Based on the concept of collimation, this paper presents a scatter measurement and correction method based on single grating scan. First, according to the characteristics of CBCT imaging, the scan method using single grating and the design requirements of the grating are analyzed and figured out. Second, by analyzing the composition of object projection images and object-and-grating projection images, the processing method for the scatter image at single projection angle is proposed. In addition, to avoid additional scan, this paper proposes an angle interpolation method of scatter images to reduce scan cost. Finally, the experimental results show that the scatter images obtained by this method are accurate and reliable, and the effect of scatter correction is obvious. When the additional object-and-grating projection images are collected and interpolated at intervals of 30 deg, the scatter correction error of slices can still be controlled within 3%.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Kuidong Huang, Wenlong Shi, Xinyu Wang, Yin Dong, Taoqi Chang, Hua Zhang, Dinghua Zhang, "Scatter measurement and correction method for cone-beam CT based on single grating scan," Optical Engineering 56(6), 064106 (29 June 2017). https://doi.org/10.1117/1.OE.56.6.064106 . Submission: Received: 13 February 2017; Accepted: 13 June 2017
Received: 13 February 2017; Accepted: 13 June 2017; Published: 29 June 2017


The research of auto focusing method for the image mosaic...
Proceedings of SPIE (September 11 2013)
Dynamic Omnidirectional Vision For Mobile Robots
Proceedings of SPIE (December 11 1985)
Open-ended tools for IR sensors, scenes, and systems design
Proceedings of SPIE (December 15 2000)
Addressing terrain masking in orbital reconnaissance
Proceedings of SPIE (May 02 2012)
Scannerless terrain mapper
Proceedings of SPIE (October 28 1996)

Back to Top