14 June 2017 Design of frequency-encoded data-based optical master-slave-JK flip-flop using polarization switch
Author Affiliations +
Abstract
An optical data processing and communication system provides enormous potential bandwidth and a very high processing speed, and it can fulfill the demands of the present generation. For an optical computing system, several data processing units that work in the optical domain are essential. Memory elements are undoubtedly essential to storing any information. Optical flip-flops can store one bit of optical information. From these flip-flop registers, counters can be developed. Here, the authors proposed an optical master-slave (MS)-JK flip-flop with the help of two-input and three-input optical NAND gates. Optical NAND gates have been developed using semiconductor optical amplifiers (SOAs). The nonlinear polarization switching property of an SOA has been exploited here, and it acts as a polarization switch in the proposed scheme. A frequency encoding technique is adopted for representing data. A specific frequency of an optical signal represents a binary data bit. This technique of data representation is helpful because frequency is the fundamental property of a signal, and it remains unaltered during reflection, refraction, absorption, etc. throughout the data propagation. The simulated results enhance the admissibility of the scheme.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Sumana Mandal, Dhoumendra Mandal, Mrinal Kanti Mandal, Sisir Kumar Garai, "Design of frequency-encoded data-based optical master-slave-JK flip-flop using polarization switch," Optical Engineering 56(6), 066105 (14 June 2017). https://doi.org/10.1117/1.OE.56.6.066105 . Submission: Received: 26 February 2017; Accepted: 22 May 2017
Received: 26 February 2017; Accepted: 22 May 2017; Published: 14 June 2017
JOURNAL ARTICLE
14 PAGES


SHARE
Back to Top