11 September 2017 Analytical modeling and experimental investigation of laser clad geometry
Author Affiliations +
Optical Engineering, 56(9), 096104 (2017). doi:10.1117/1.OE.56.9.096104
Based on rapid prototyping and laser cladding, laser material deposition (LMD) can be used to produce a near-net shape component in which the deposition quality and geometry characteristics of the previous layer, especially the first layer, determines the deposition quality and process stability of LDM-ed parts. A theoretical model for the first deposition layer in the LMD process has been developed to estimate the clad geometry (width, depth, and height) depending on the process parameters (laser power, powder feed rate, and scanning speed). This model contains two constants that are calculated based on the experimental results. The theoretical results are discussed and compared with the experimental data from the perspective of mass energy and line mass. The theoretical results are in accordance with the experimental results with reasonable accuracy that indicates the capability of predicting the clad geometry.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Xinlin Wang, Dewei Deng, Yingbin Hu, Zhichao Liu, Hongchao Zhang, "Analytical modeling and experimental investigation of laser clad geometry," Optical Engineering 56(9), 096104 (11 September 2017). https://doi.org/10.1117/1.OE.56.9.096104 Submission: Received 29 April 2017; Accepted 9 August 2017
Submission: Received 29 April 2017; Accepted 9 August 2017


Advances In Laser Cladding Process Technology
Proceedings of SPIE (September 30 1985)
Cross-section modeling of pulsed Nd:YAG laser cladding
Proceedings of SPIE (November 04 1994)
Production Laser Hardfacing Of Jet Engine Turbine Blades
Proceedings of SPIE (August 05 1986)
Laser cladding
Proceedings of SPIE (November 14 2003)
Study on attenuation of laser power by powder flow in...
Proceedings of SPIE (January 13 2005)

Back to Top