Understanding and improving optical coherence tomography imaging depth in selective laser sintering nylon 12 parts and powder

Adam D. Lewis; Nitesh Katta; Austin B. McElroy; Thomas E. Milner; Scott Fish; Joseph J. Beaman Jr.

doi:10.1117/1.OE.57.4.041414

20 April 2018 Understanding and improving optical coherence tomography imaging depth in selective laser sintering nylon 12 parts and powder

Adam D. Lewis, Nitesh Katta, Austin B. McElroy, Thomas E. Milner, Scott Fish, Joseph J. Beaman Jr.

Author Affiliations +

Optical Engineering, Vol. 57, Issue 4, 041414 (April 2018). https://doi.org/10.1117/1.OE.57.4.041414

Abstract

Optical coherence tomography (OCT) has shown promise as a process sensor in selective laser sintering (SLS) due to its ability to yield depth-resolved data not attainable with conventional sensors. However, OCT images of nylon 12 powder and nylon 12 components fabricated via SLS contain artifacts that have not been previously investigated in the literature. A better understanding of light interactions with SLS powder and components is foundational for further research expanding the utility of OCT imaging in SLS and other additive manufacturing (AM) sensing applications. Specifically, in this work, nylon powder and sintered parts were imaged in air and in an index matching liquid. Subsequent image analysis revealed the cause of “signal-tail” OCT image artifacts to be a combination of both inter and intraparticle multiple-scattering and reflections. Then, the OCT imaging depth of nylon 12 powder and the contrast-to-noise ratio of a sintered part were improved through the use of an index matching liquid. Finally, polymer crystals were identified as the main source of intraparticle scattering in nylon 12 powder. Implications of these results on future research utilizing OCT in SLS are also given.

Citation Download Citation

Adam D. Lewis, Nitesh Katta, Austin B. McElroy, Thomas E. Milner, Scott Fish, and Joseph J. Beaman Jr. "Understanding and improving optical coherence tomography imaging depth in selective laser sintering nylon 12 parts and powder," Optical Engineering 57(4), 041414 (20 April 2018). https://doi.org/10.1117/1.OE.57.4.041414

Received: 5 October 2017; Accepted: 29 March 2018; Published: 20 April 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available