27 January 2018 Estimation of optimal hologram recording modes on photothermal materials
Author Affiliations +
Abstract
A theoretical analysis of the hologram recording process on photothermal media to estimate the required laser radiation power for the information recording as the function of the spatial frequency and radiation exposure duration is considered. Results of the analysis showed that materials with a low thermal diffusivity are necessary to increase the recording density in these media and the recording should be performed with short pulses to minimize the thermal diffusion length. A solution for the heat conduction equation for photothermal materials heated by an interference laser field was found. The solution obtained allows one to determine the required value of the recording temperature for given spatial frequencies, depending on the thermal physical parameters of the medium and on the power and duration of the heating radiation.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Nasipbek Kurmanalievich Dzhamankyzov, Yusupzhan K. Ismanov, Kubanychbek M. Zhumaliev, Samsaly A. Alymkulov, "Estimation of optimal hologram recording modes on photothermal materials," Optical Engineering 57(1), 017113 (27 January 2018). https://doi.org/10.1117/1.OE.57.1.017113 . Submission: Received: 15 November 2017; Accepted: 9 January 2018
Received: 15 November 2017; Accepted: 9 January 2018; Published: 27 January 2018
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top