27 February 2018 Electrical and optical performance of midwave infrared InAsSb heterostructure detectors
Author Affiliations +
Abstract
We investigate the high-operating temperature performance of InAsSb/AlSb heterostructure detectors with cutoff wavelengths near 5  μm at 230 K. The devices have been fabricated with different types of absorbing layers: nominally undoped absorber (with n-type conductivity), and both n- and p-type doped. The results show that the device performance strongly depends on absorber layer type. Generally, the p-type absorber provides higher values of current responsivity than the n-type absorber, but at the same time also higher values of dark current. The device with the nominally undoped absorbing layer shows moderate values of both current responsivity and dark current. Resulting detectivities D  *   of nonimmersed devices vary from 2  ×  109 to 5  ×  109  cm Hz1/2 W  ?  1 at 230 K, which is easily achievable with a two-stage thermoelectric cooler. Optical immersion increases the detectivity up to 5  ×  1010  cm Hz1/2 W  ?  1.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Emilia Gomółka, Emilia Gomółka, Małgorzata Kopytko, Małgorzata Kopytko, Olga K. Markowska, Olga K. Markowska, Krystian Michalczewski, Krystian Michalczewski, Łukasz Kubiszyn, Łukasz Kubiszyn, Artur Kębłowski, Artur Kębłowski, Jarosław Jureńczyk, Jarosław Jureńczyk, Waldemar Gawron, Waldemar Gawron, Piotr Marcin Martyniuk, Piotr Marcin Martyniuk, Józef F. Piotrowski, Józef F. Piotrowski, Jarosław Rutkowski, Jarosław Rutkowski, Antoni Rogalski, Antoni Rogalski, } "Electrical and optical performance of midwave infrared InAsSb heterostructure detectors," Optical Engineering 57(2), 027107 (27 February 2018). https://doi.org/10.1117/1.OE.57.2.027107 . Submission: Received: 23 October 2017; Accepted: 30 January 2018
Received: 23 October 2017; Accepted: 30 January 2018; Published: 27 February 2018
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top