12 April 2018 Influence of vibration on the coupling efficiency in spatial receiver and its compensation method
Author Affiliations +
Abstract
In order to analyze the loss of the free-space optical receiver caused by the vibration, we set up the coordinate systems on both the receiving lens surface and the receiving fiber surface, respectively. Then, with Gauss optics theory, the coupling efficiency equation is obtained. And the solution is calculated with MATLAB® software. To lower the impact of the vibration, the directional tapered communication fiber receiver is proposed. In the next step, the sample was produced and two experiments were done. The first experiment shows that the coupling efficiency of the receiver is higher than that of the traditional one. The second experiment shows the bit error rate of the new receiver is lower. Both of the experiments show the new receiver could improve the receiving system’s tolerance with the vibration.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Qinggui Hu, Qinggui Hu, Yining Mu, Yining Mu, } "Influence of vibration on the coupling efficiency in spatial receiver and its compensation method," Optical Engineering 57(4), 046105 (12 April 2018). https://doi.org/10.1117/1.OE.57.4.046105 . Submission: Received: 7 December 2017; Accepted: 23 March 2018
Received: 7 December 2017; Accepted: 23 March 2018; Published: 12 April 2018
JOURNAL ARTICLE
5 PAGES


SHARE
Back to Top