Translator Disclaimer
9 February 2019 Characterization of a polarimetric infrared imager based on the orthogonality breaking technique
Author Affiliations +
Abstract
We report an in-depth experimental characterization and analysis of an infrared active polarimetric imaging system based on the orthogonality breaking polarization-sensing approach. We first recall the principle of this laser scanning polarimetric imaging technique, based on the illumination of a scene by means of a dual-frequency dual-polarization light source. The experimental design is then described, along with measurements on test scenes with known polarimetric properties used to validate/calibrate the imaging system and to characterize its optical properties (sensitivity and resolution). The noise sources that temporally and spatially affect the quality of the orthogonality breaking data are then investigated. Our results show that the raw temporal signals detected at a given location of the scene are perturbed by Gaussian fluctuations, and the spatial information contained in the images acquired through raster scan of the scene are dominated by speckle noise, which is a common characteristic of active polarimetric imaging systems. Finally, the influence of the source temporal coherence on the images is analyzed experimentally, showing that orthogonality breaking acquisitions can still be performed efficiently with a low-coherence source.
© 2019 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2019/$25.00 © 2019 SPIE
François Parnet, Julien Fade, Muriel Roche, Goulc’hen Loas, Noé Ortega-Quijano, Ludovic Frein, and Mehdi Alouini "Characterization of a polarimetric infrared imager based on the orthogonality breaking technique," Optical Engineering 58(8), 082407 (9 February 2019). https://doi.org/10.1117/1.OE.58.8.082407
Received: 16 October 2018; Accepted: 14 January 2019; Published: 9 February 2019
JOURNAL ARTICLE
15 PAGES


SHARE
Advertisement
Advertisement
Back to Top