10 July 2014 Metrology of single-photon sources and detectors: a review
Author Affiliations +
The generation, measurement, and manipulation of light at the single- and few-photon levels underpin a rapidly expanding range of applications. These range from applications moving into the few-photon regime in order to achieve improved sensitivity and/or energy efficiency, as well as new applications that operate solely in this regime, such as quantum key distribution and physical quantum random number generation. There is intensive research to develop new quantum optical technologies, for example, quantum sensing, simulation, and computing. These applications rely on the performance of the single-photon sources and detectors they employ; this review article gives an overview of the methods, both conventional and recently developed, that are available for measuring the performance of these devices, with traceability to the SI system.



Applications that use single-photon sources and detectors cover an expanding range of topics, as demonstrated by the contents of these proceedings. They can be considered as falling under overlapping categories. The first, which is primarily the domain of single-photon detectors, is concerned with detection at the lowest of light levels, and the discrete nature of light is a phenomenon that has to be accommodated. Examples of these are sensing applications, such as low ambient light sensing and surveillance, medical imaging, and astronomy. The second is that where the quantized energy structure of matter is the important factor. Examples of these are photoelectric and thermal detection, single-photon generation, and the majority of spectroscopic applications, which may range from solid-state physics to a multiplicity of biological applications. The final category covers applications where the quantum nature of light is the key factor. This is relevant in the fields of quantum information processing and quantum metrology where industrial technologies based on the production, manipulation, and detection of single photons are emerging, and this is the field that is driving the need for new metrology. Within this category lies the application of nonclassical correlations, such as entanglement. Quantum key distribution (QKD) and quantum random number generators (QRNGs) are two of the most commercially advanced technologies and among the first to directly harness the peculiar laws of quantum physics. Figure 1 shows some of the main application areas.

Fig. 1

Main application areas for single-photon detection and generation.


This review is concerned with the traceable methods that are available for reliable characterization of single-photon detectors and sources. Traceable means that the result of a measurement, no matter where it is made, can be related to a national or international measurement standard and that this relationship is documented. The concept of traceability is important because it makes possible the comparison of the accuracy of measurements worldwide according to a standardized procedure for estimating measurement uncertainty.1 The chosen system of units is the International System of Units (SI). SI is not static but evolves to match the world’s increasingly demanding requirements for measurements at all levels of precision and in all areas of science and technology. However, any changes in the SI system are designed to ensure that any step-changes in units are minimized. Hence, traceability to the SI ensures comparison of measurements not only worldwide, but also between one year and another.

Current optical power scales are based on measurements in the 0.1- to 1-mW regime, which are suitable for traditional requirements.2 The rapid development of single-photon sources and detectors, and the growth of associated technologies, such as QKD and quantum computing, require measurements in the single- and few-photon regime. The international acceptance of these new quantum-based technologies requires improved traceability and reliability of measurements at the few-photon level. This has led to a proposal to expand the formulation of candela, the SI unit of optical power, to include one based on photon number. The reader is directed to Zwinkels et al.3 for further details.


Single-Photon Sources

A true single-photon source (SPS) will emit individual photons at periodic intervals. To guarantee its operation, the core of the source will be a solitary quantum emitter, such as an atomic particle, molecule, or quantum dot. Deterministic emission is triggered by a periodic electronic or optical excitation of the source. An ideal source will exhibit highly efficient polarized emission into a well-defined spatial optical mode; there will be negligible temporal jitter of the photon emission with respect to the clock signal triggering the emission.

Various measurements exist to quantify the operating parameters of a practical SPS. The degree of second order coherence g(2)(τ) determines how antibunched the emitted photons are; for an ideal source, g(2)(0)=0. This parameter is a measure of the probability of multiphoton emission events, which is greatly reduced in comparison to a coherent light source. The coherence time τc (measured via the coherence length lc) and the source emitter’s lifetime τs are important for evaluating the quantity 2τs/τc. For an ideal source, no dephasing of the emitted photons exists and the ratio is 2τs/τc=1, meaning that the photons are wholly indistinguishable. This can be quantified further through the observation of two-photon quantum interference with perfect visibility.

In the context of quantum-photonic technologies based on entanglement, the antibunched and indistinguishable nature of photons is paramount. However, real (imperfect) sources will deviate from the ideal case, and the emission will not be perfectly antibunched or indistinguishable or free of jitter. The parameters described above can be used as metrics to determine the utility of a practical SPS in such applications.


Single-Photon Detectors

Single-photon detectors, also referred to as photon counters, operate in either gated or nongated (i.e., continuously gated) modes, and are only able to detect an incoming optical pulse during these gates. Single-photon detectors can be characterized by the following properties:

  • photon-number resolution (the ability to distinguish the number of photons in each detected pulse)

  • detection efficiency, η (the probability that a photon incident at the optical input of the detector within a detection gate will be detected and produce an output signal)

  • dark count probability (the probability that a detector registers a detection event within a detection gate in the absence of incident photons)

  • after-pulse probability (the probability that a detector registers a false detection event in the absence of illumination, conditional on a true photon detection event in a preceding detection gate)

  • dead-time (the time interval after a detection event when the detector is unable to provide a response to an incoming photon)

  • recovery time (the shortest time duration after a photon detection event for the detection efficiency to return to its steady-state value)

  • jitter (the temporal variation in the output signal produced by the detector upon registering an event)

  • linearity of response (the property that the detector response is unchanged as the number of incident photons per pulse varies over a specified range)

  • maximum exposure level (the photon flux above which the detector may undergo a temporary or permanent change in characteristics).

These properties may be wavelength and temperature dependent, as well as varying across the spatial dimensions of the detector.4 A property that is important in QKD is the photon counter indistinguishability, i.e., the extent to which the detector output voltage pulses of detectors can be distinguished in the time domain.

An ideal detector would be photon number resolving for all n, where n is the number of photons in a pulse, as well as having unity detection efficiency, and zero dark count and after-pulse probabilities with no dead time or recovery time. Various single-photon detection technologies exist, and a particular technology may only exhibit a subset of the characteristics listed above.


Single-Photon Sources and Detectors



The simplest approximation to an SPS would take thermal radiation (from a hot filament or discharge lamp) and attenuate it down to the photon-counting level. While this form of light may be relevant in ambient low-light sensing applications, the most common SPS is an attenuated laser, where the photons in the attenuated output are distributed within time intervals or pulses [continuous wave (CW) or pulsed radiation, respectively] according to Poissonian statistics. Thermal light also gives rise to a distribution of photon number states, and both types of light can have less (zero) or more than one photon per time-interval/pulse.

Practical SPSs can be divided into two classes. The first comprises heralded SPSs, which are based on correlated pairs of photons produced in a nonlinear medium. The second class uses a single quantum emitter, for example, as in demonstrations with trapped atoms and ions, as well as with molecules, color centers, and quantum dots in a solid-state host.

The drive to develop true, deterministic, SPSs was provided by the realization that such states, together with interference and detection, could be used to achieve quantum computation and other photonic quantum technologies,56.7 including applications to metrology.89.10.11 Deterministic sources would provide scalability (i.e., being able to manipulate large numbers of photons using finite resources), which is considered to be problematic for heralded photons created in spontaneous nonlinear processes. Reviews covering the topic in more detail have been published.1213.


Heralded single photons

Correlated pairs of photons produced in a three- or four-wave nonlinear process can be used as a source of single photons. Detection of one of the created photons heralds the existence of its single-photon twin. The creation process is random in time, and multiphoton events can still arise. Until true deterministic sources are realized, these probabilistic processes are the pragmatic option for producing single- and entangled-photon states and exploring the potential offered by entanglement and nonclassical correlations.

Spontaneous parametric downconversion (SPDC) is a three-wave mixing process where a photon in a medium (usually a crystal) with χ(2) nonlinearity can be downconverted into two photons under the constraint of energy and momentum conservation, commonly referred to as phase matching. SPDC can produce correlations19,20 (in the pair of downconverted particles) in time, energy, momentum, polarization, and angular momentum. In addition to producing heralded single photons, SPDC can also be used to produce pairs of photons that are entangled in one or more of their observables.21,22 Periodic poling has been applied to χ(2) crystals in order to achieve phase-matching conditions not otherwise possible,23 and has been applied to waveguide structures24,25 where the downconverted photons are constrained to the single (or few) spatial mode(s) of the waveguide. We highlight a few implementations—entanglement-based QKD over 144 km through free space,26 a 1.55-μm source using a fast shutter to suppress background counts,27 and multiplexing of four sources to provide a high output rate while suppressing multiphoton states.28

Spontaneous four-wave mixing (SFWM) is a χ(3) nonlinear process, where two pump photons create the pair of downconverted photons. This process is weaker than the χ(2) process, so a longer interaction path is required. Initial work focused on silica optical fiber,29,30 and recent efforts have applied the SFWM process to on-chip waveguides in silica.3132.33 In silica, a particular problem to overcome is the Raman background.


Single emitters

Atomic particles can be trapped and cooled almost to rest, thus providing a reproducible single quantum emitter. A single trapped ion will exhibit antibunching,34 and such systems have been used successfully in demonstrating probabilistic atom-photon entanglement,35,36 atom-atom entanglement,37 and quantum teleportation between remote atomic particles.38 A necessary requirement for this work is that the photons from separate sources exhibit quantum interference.39 Cavity quantum electrodynamics offers the route to a deterministic source; the ion is confined in an optical cavity which is near resonant and strongly coupled to one of two transitions in a Λ-configuration of the atomic-level structure.40 The technique of stimulated Raman scattering via adiabatic passage can generate single photons deterministically with high efficiency, although at limited rate. An analogous approach using single atoms confined in an optical dipole trap has yielded deterministic sources,41 which exhibit quantum interference.42 These atom-cavity systems have been used as nodes43,44 in the demonstration of an elementary quantum network.45

Using advanced micro- and nanofabrication techniques, III-V semiconductor heterostructures can be engineered to create SPSs.14,17 For example, InAs quantum dots can be grown within a structure based on GaAs; these can be excited by optical46 or electrical47 means. The Purcell effect can be used to enhance the rate and directionality of the emission by embedding the quantum dot in a pillar microcavity;48,49 layers of a semiconductor with an alternating refractive index form Bragg mirrors, and the structure is etched to a micron-scale diameter to minimize the cavity’s mode volume and maximize enhancement. Optically pumped structures can generate indistinguishable photons,46 which have been used to demonstrate entanglement50 and teleportation.51 Optically pumped semiconductor sources have also been used to generate polarization-entangled photons.52,53 Indistinguishability of single photons emitted by an electrically pumped source has also been demonstrated.54 Quantum dot emission is inhomogeneous; this requires that emission from separate sources is tuned to enable photon indistinguishability. As an alternative to pillar microcavities, locating quantum dots in a photonic crystal cavity has also been investigated.55 Cryogenic temperatures are necessary for all of these semiconductor approaches.

Color center defects in diamond is another approach to generating single photons,15 the nitrogen-vacancy (NV) defect56 being the most widely studied. Recent work has shown coupling of individual NV centers to a microring resonator57 and a photonic crystal cavity58 in single-crystal diamond, as well as coupling of a single NV center to a fiber microcavity.59 These approaches will be used in quantum information applications in conjunction with the internal energy levels of the NV defect. Other diamond defects can also be used for generating single photons, one example being that due to chromium.60

Molecules have also been investigated.61 Their rich vibrational structure leads to spectral broadening at ambient temperatures. At very low temperatures, the transition connecting the ground vibrational states of the ground and excited electronic states is a very narrow line, the zero-phonon line (ZPL). ZPL line-widths are often lifetime-limited at low temperatures. Photostability is a serious issue.62 Recent work has demonstrated quantum interference from separate molecules63 and improved the spontaneous emission rate.64

Finally, we highlight novel structures that have recently been used to enhance the coupling efficiency from solid-state single emitters.6566.67.68



Several types of single-photon detectors have been developed, and a brief overview of the most commonly used types is given below. For detailed reviews, see Hadfield,69 Eisaman et al.,16 and Migdall et al.18


Non-photon-number resolving detectors

The photomultiplier tube (PMT) was the first established photon-counting technology70 and consists of a vacuum tube with a light absorbing photocathode from which electrons are liberated through the photoelectric effect. The few-electron photocurrent is multiplied by a cascade of secondary electron emissions from a series of electrodes positively biased with respect to the previous one (dynodes) in order to obtain a macroscopic current pulse. Different photocathode materials can be chosen in order to optimize the spectral response, ranging from UV to telecom wavelengths. An evolution of the PMT idea is the microchannel plate PMT, where glass capillaries are fused in parallel and coated with secondary electron-emitting materials to obtain a single continuous biased dynode71 with an improved temporal resolution with respect to the original PMT (tens of picoseconds versus hundreds of picoseconds).

Single-photon avalanche photodiodes (SPADs) operating in Geiger mode are the most common and commercially successful solution for single-photon counting, having replaced PMTs in many applications. SPADs are based on an avalanche photodiode structure reversely biased above the breakdown voltage (known as Geiger mode operation), so that electron-hole pairs generated by photon absorption are multiplied in an avalanche gain process. To control this effect, the avalanche must be stopped and the device reset by a passive or active quenching circuit.7273.74.75 Silicon-based SPADs operating in Geiger mode achieve single-photon sensitivity in the VIS-NIR, with low dark counts and timing jitter reduced to tens of picoseconds.

SPADs for the 1.3- and 1.55-μm telecommunication bands use lower-band-gap semiconductor materials, such as Ge and InGaAs/InP.7677.78.79.80 These devices suffer from dark count rates that are orders of magnitude higher than that for their Si counterparts and are typically operated in gated Geiger mode, although free-running operation has recently been achieved.81,82 Much of the ongoing effort to improve InGaAs SPAD performance is targeted at the commercial development of fiber-based QKD systems.83 Novel biasing and gating schemes, employing a dc bias just below the avalanche breakdown voltage on top of which a high-speed periodic low amplitude bias signal is added,84,85 enable increased device clock rates,86 a feature that is particularly important for QKD.87

Frequency upconversion schemes are used to convert photons in the 1.3- and 1.55-μm telecommunication bands to a shorter wavelength that can be detected by Si-SPADs, which typically have a higher detection efficiency than infrared SPADs.8889.90.91 Upconversion exploits sum-frequency phenomena in nonlinear optical media, where a weak signal (the single-/few-photon state) is combined with a strong pump signal to upconvert the weak signal to the frequency that is the sum of the frequency of the two incoming signals. Despite what seems a very simple and beautiful solution, there are several technical challenges and drawbacks to frequency upconversion detectors related to the stability of, and fluorescence and other optical losses within, the nonlinear medium.

Superconducting nanowire single-photon detectors (SNSPDs) exhibit low dark counts (1Hz), short recovery times (10ns), and low timing jitter (<100ps). The detection element is an 100-nm-wide nanowire of superconducting material in a meander structure. The superconducting wire is biased just below its critical current, and a localized resistive hot-spot is created when a photon strikes the wire, triggering the voltage-pulse that signifies the detection of the photon.9293.94 In contrast to SPADs that operate at room temperature, or temperatures achievable using thermoelectric cooling, these devices operate at a few kelvin. The first devices used NbN nanowires, but recent improvements in detection efficiency have been achieved by exploiting optical cavities95 and amorphous W-Si nanowires.96


Photon-number resolving detectors

PMTs, SPADs, and, more recently, SNSPDs are available commercially and are reasonably straightforward to use, but they do not have a photon-number resolving (PNR) ability. On the contrary, detectors with some kind of PNR ability are often research prototypes.

One approach is to spatially or temporally multiplex non-PNR detectors.69,9798.99.100.101 In addition to single chip spatial multiplexing of SNSPDs,102 there have been several efforts to fabricate SPAD arrays on a single chip—one example is a silicon photomultiplier device consisting of an array of SPAD pixels that are read in parallel.103 Other examples are arrays where each SPAD of the array is integrated directly with quenching circuitry and millimeter-scale SPAD arrays.104105.106.107.108

In addition to these extrinsic PNR detectors based on multiplexed non-PNR detectors, there are laboratory-prototype intrinsic PNR detectors, e.g., visible-light photon counters (VLPCs) and superconducting transition-edge sensors (TESs).

VLPCs are low-temperature (6K) semiconductor-based high-efficiency PNR detectors.109110.111 In these devices, the absorption of a photon produces an electron–hole pair that, in the low-voltage gain region, produces a multiplication process close to the theoretical minimum. This gives rise to a signal that is proportional to the photon number and has been proven successful for counting up to five photons.

Superconducting TESs provide almost ideal detection efficiency and intrinsic PNR ability.112113.114 A major limitation is that they must be operated in the tens of millikelvin regime since they are essentially very sensitive bolometers. The sensor is a superconducting film maintained at the superconducting transition; thus, any change in temperature will cause a change in resistance, which is detected using a SQUID amplifier. Another drawback of the TES is that the energy resolution and recovery time are, respectively, directly and inversely proportional to the superconducting transition temperature. This currently limits the maximum repetition rate to around 1MHz.115,116


Quantum Key Distribution

QKD83,117 is arguably the first commercialized quantum optical technology and uses single photons to establish a secret key (cipher) between two parties over an open optical channel, such as free space26 or an optical fiber.118 If a hacker intercepts these photons, (s)he will disturb their encoding in a way that can be detected. QKD does not prevent hacking, but reveals whether a hacker has been able to compromise the key. The simplest configuration, known as “prepare-and-measure” or “one-way,” comprises a transmitter (Alice), which encodes bits on single photons, and a receiver (Bob), which decodes these bits. In the “plug-and-play” or “go-and-return” configuration, Bob transmits photons, Alice encodes information on them, and resends them to Bob for decoding. The most commercially advanced QKD systems operate over an optical fiber, use attenuated laser pulses (faint pulses) as an approximation to true single photons, and encode information on the phase of the photons.119 Photons are distributed in attenuated laser pulses according to Poissonian statistics; hence, some pulses will contain two or more photons. In order to reduce the power of photon-number-splitting120 attacks on these multiphoton pulses, the Scarani-Acin-Ribordy-Gisin121 and decoy state122 protocols were developed.

QKD is a physical, as opposed to an algorithmic, process. The laws of physics prove the security of QKD if faithfully implemented. The physical performance of the QKD system at the time of creating the secret key is, therefore, essential to its security. As such, it is one of the drivers for single-photon source and detector metrology.

Measurement of the performance of the optical components of a QKD system can be used to establish (1) whether they satisfy the assumptions and requirements of security proofs,123,124 (2) the performance of the system in terms of expected secure bit-rate and range, (3) immunity from side-channel attacks,125,126 and (4) whether component performance has changed, either from natural ageing or from device manipulation,127128.129 i.e., hacking attacks via the open optical channel.

For in-fiber faint-pulse QKD systems, the most important properties of the emitted photons are the mean photon number(s), timing jitter, and any means of distinguishing the photons apart from their phase (e.g., from their spectral or temporal characteristics). For the photon receiver, the relevant properties are photon detection probability, dark count and after-pulse probability, dead time, recovery time, and spectral and temporal distinguishability.

Random number generators are also essential components of QKD systems, since the encoding, as well as the intensity for decoy protocol systems, must be varied in a truly random way. Optical quantum random number generators operate at the single-photon level and depend on the performance of their constituent single-photon sources and detectors.130


Characterization of Sources

Characterization of an SPS is achieved through the estimation of its relevant parameters, using dedicated measurement techniques. A provisional list of these parameters, and the associated measurement techniques, is presented below.


Single-Photon Emission

The most important measurement is evaluating the probability of having more than one photon emitted by the source within a prescribed time interval. This is commonly performed with a Hanbury Brown-Twiss (HBT) interferometer operating at single-photon level. It is usually implemented using two threshold (click/no-click) detectors placed at the output ports of a 50:50 beam splitter [Fig. 2(a)].16,18,131 How efficiently an SPS emits a single photon can be quantified by means of the α parameter proposed by Grangier et al.131 This is essentially an anticorrelation criterion based on the parameter.

Fig. 2

Single-photon measurements: (a) α-parameter measured with a Hanbury Brown-Twiss interferometer. (b) Coherence time τc measured with a Michelson interferometer. (c) Indistinguishability V measured with a Hong-Ou-Mandel interferometer.


α(τ)=Q(2)/[Q(r)(1)Q(t)(1)], where Q(1) is the probability of a count in the reflection (r) or transmission (t) port of the beam splitter, Q(2) is the probability of a coincidence in counts, and τ is the time delay between separate detection events at the beam splitter output ports. In the single-photon community, the parameter α is often called the second-order correlation function g(2)(0), but we prefer to refer to α since g(2)(0) has a different definition,132 despite the fact that in the few-photon regime the two definitions are asymptotically equivalent. Idealized plots of α(τ) for different sources are illustrated in Fig. 3.

Fig. 3

Characteristic plot of α as a function of time τ between coincidence clicks (each detector being equidistant from the beam splitter). For a Poissonian source, such as an attenuated laser, α=1 for all τ (blue, continuous); a thermal source exhibits bunching, i.e., α(0)>1 (red, dotted) and is said to be super-Poissonian; a single-photon source exhibits antibunching (green, dashed) and is said to be sub-Poissonian. For an ideal single-photon source, α(0)=0.


Each pulse from the SPS is expected to contain n photons (n=1 in the ideal case). Thus, by considering the proper detection model for the click/no-click detectors, the probability of the detector firing due to an optical pulse containing n photons, as well as the probability of observing a coincidence between the two detectors of the HBT due to a single pulse from the SPS, can be properly evaluated.18

It is worth noting that with typical click/no-click detectors the parameter α is almost independent of the detection efficiency of the detectors (once they are fairly similar), while it can be strongly affected by the presence of dark counts or counts due to stray light. For this reason, time-correlated single-photon counting (TCSPC) measurement techniques can be helpful in providing proper estimation of the background counts. Furthermore, the detector dead times and imbalance of the HBT interferometer may bias the estimation of the α parameter. Proper estimation of these nonidealities is necessary to implement the needed corrections in order to have a faithful estimation for α. Examples of proper detection models in HBT interferometers can be found in Brida et al.133 and Migdall et al.18

A two-time correlation function α(t1,t2), where t1 and t2 are the delay times between the excitation pulse and photon detection on the two detectors, can be used to analyze the dynamics of the single-photon emission.134


Coherence Time, Emission Lifetime, and Indistinguishability

These measurements are important for characterizing SPSs designed for entanglement-based applications (see Sec. 1.1).

The coherence time τc can be measured using a Michelson or Mach-Zehnder interferometer to produce single-photon self-interference [Fig 2(b)].135 The coherence length is the 1/e decay point of the interference envelope when measured in optical path difference units, and the coherence (decay) time is obtained by dividing this distance by the speed of light (Fig. 4).

Fig. 4

The first-order field-field correlation g(1)(τ) of the total emission from a single nitrogen-valency defect center in diamond. The decay time is found to be 13 fs {reprinted [Fig. 2(c)] with permission from F. Jelezko et al., Phys. Rev. A 67, 041802(R), 2003. Copyright (2003) by the American Physical Society}.


The lifetime τs of a single emitter, which will generally be a combination of the intrinsic radiation lifetime, the dephasing time, and jitter (due to nonradiative transitions), can be measured by using pulsed excitation. Exploiting TCSPC, and performing coincidence measurements between the triggering signal and the detected photon, one obtains a temporal profile corresponding to the convolution of the different components of the experiment, i.e., the radiation from the emitter, the detector, and the TCSPC instrumentation (the latter is usually negligible). The ideal situation is when both TCSPC electronics as well as the single-photon detector have negligible jitter with respect to the source. When this is not the case, a proper characterization of the detector and TCSPC electronics should be performed in order to deconvolve the profile of interest. A single-photon detector with the lowest possible jitter is needed for this measurement. Superconducting nanowire detectors, which can have a jitter of just tens of picoseconds,16,18,69,136 appear to be the best for this purpose.

Indistinguishability is measured using Hong-Ou-Mandel (HOM) interference.137,138 If two photons are perfectly indistinguishable, i.e., they are in exactly the same mode and are each incident at the same time at the separate input ports of a 50/50 beam splitter, they will bunch or coalesce, i.e., both will exit together from one of the exit ports [Fig. 2(c)]. The interference curve is usually measured by placing a photon-counting detector at each output port of the beam splitter and measuring the detection coincidences Nc as the time delay Δτ between the photons being incident at the input ports is varied. The detection coincidences will be a minimum for zero time delay; fully destructive interference will occur only if the two photons are completely indistinguishable. The widely accepted definition for the measured Hong-Ou-Mandel visibility is given by


where Δτdip is the width of the interference dip where the photon wavepackets overlap, Nc,ΔτΔτdip is the measured coincidence rate far from the dip region and Nc,Δτ=0 is the measured coincidence rate at the bottom of the dip.

Data fitting is usually applied to the interference curve, whose form depends on the spectrum of the interfering photons,139 as well as imperfections in the experimental setup, in order to extract a reliable value for the interference visibility and, hence, the indistinguishability (Fig. 5).140

Fig. 5

Hong-Ou-Mandel interference obtained from degenerate photons produced by spontaneous parametric downconversion in beta-barium borate. The abscissa axis is in units of optical path difference. The measured visibility of 0.79, after correction for instrumentation effects, yielded a photon indistinguishability of 0.95 (reproduced from Ref. 140 with permission).



Wavelength and Spectral Line-Width

It is possible to measure the wavelength and spectral line-width of an SPS with a monochromator or a wavemeter coupled to a detector operating at the single-photon level.

An interesting solution for measuring the spectral line-width exploits a stable, tunable Fabry-Perot resonator.141 The technique requires that the cavity free spectral range (FSR) is greater than the line-width of the SPS, i.e., FSRΔνsource, to enable an unambiguous measurement of the source spectrum, yet there must be a line-width ΔνcavityΔνsource to adequately resolve any spectral structure. When used in transmission mode, the Fabry-Perot cavity can be tuned to resonance with the SPS spectral profile using a photon-counting detector.


Mean Photon Number and the Variation in Mean Photon Number

A measurement that is important, particularly for a pseudo SPS based on an attenuated laser, is related to the estimation of the mean photon number and its variance. A solution suitable for any kind of SPS exploits a calibrated single-photon detector. The mean number of photons and its variance will be estimated on the basis of assumptions about the statistical model of the detection process and the photon statistics of the source (see Sec. 5.1.4). If the latter is not available, quantum tomographic techniques should be employed.


Quantum Tomography and State Reconstruction

Knowledge of the density matrix of a quantum optical state is fundamental for several applications, and considerable effort has been devoted to finding reliable methods to fully, or partially, reconstruct it (see Refs. 142 and 143 and references therein).

Quantum tomography is an experimental procedure to reconstruct the density matrix of an unknown quantum state when many identical copies are available in the same state, so that a different measurement can be performed on each copy of the state. Balanced homodyne detection is able to measure all possible linear combinations of position and momentum operators (the quadratures) of a quantum optical field. The probability distribution of the quadrature operators is demonstrated to be just the Radon transformation of the Wigner function of the quantum optical state.142,143

In principle, quantum tomography allows perfect reconstruction of the state in the limit of an infinite number of measurements. However, in the practical finite-measurement case, statistical errors affect the quality of the reconstruction. Data analysis strategies and optimization algorithms, e.g., adaptive tomography or maximum-likelihood strategies, have been investigated in order to obtain a physical and unbiased reconstructed density matrix.144145.146.147.148

Direct reconstruction of the density matrix of a specific degree of freedom of a quantum optical field instead of the Wigner function has been routinely performed in finite-dimension Hilbert spaces, e.g., in the case of photon polarization (including qubits and qutrits)144,149150.151.152.153 and in the case of photon optical angular momentum.154,155 This is achieved by making a quorum of direct projective measurements (with a single-photon detector) on the different copies of the quantum optical system (typically a single photon). Optimization algorithms have been developed to obtain the reconstructed physical density matrix that most likely corresponds to the measured data.142

It is often not necessary to reconstruct the full density matrix, as the experimentalist is interested only in reconstructing the diagonal elements in the photon number basis, i.e., the photon statistics. The most direct way to measure a photon number distribution is by using photon number resolving detectors. It is possible to deconvolve the photon statistics of the incoming light field by knowing the mode of operation of the PNR detector (e.g., linear detection in the case of TES detectors156157.158 and nonlinear detection in the case of temporally or spatially multiplexed detectors9798.99.100,103) as well as its inefficiencies (e.g., quantum efficiency, dark counts, reliability of the photon number discrimination, pixel cross-talk, etc.).

PNR detection has also been used to reconstruct just the underlying mode structure of multimode classical and nonclassical light fields instead of the full density matrix. Full characterization of the mode structure involves a series of separate measurements in spatial, temporal, frequency, and polarization domains, requiring a range of instrumentation. This method uses only the measurement of the photon number distribution of a field and exploits an optimization algorithm together with some hypotheses about the field modes.159

Another approach uses a non-PNR detector, which can only distinguish between when photons are absorbed by the detector (producing a “click” or an “on” signal) and when no photons are absorbed (producing an “off” signal, i.e., no “click” signal). The data used for the reconstruction of the probability distribution are the probability of “no-click” for different values of the quantum efficiency of the “on/off” detector. This quantum efficiency variation is obtained by using a calibrated attenuator in front of the detector and applying specific optimization algorithms in order to obtain the most likely photon number distribution.160,161 A minor modification of this technique has been proven to be able to also reconstruct some off-diagonal elements of the density matrix.162


Polarization state reconstruction

Photon polarization is the quantum mechanical equivalent of the classical electromagnetic light polarization. The quantum polarization state vector for a single photon, for instance, is identical with the Jones vector, usually used to describe the polarization of a classical wave. Thus, quantum state tomography is equivalent to the estimation of Stokes parameters for classical light, the only difference being that instead of measuring light power, what is experimentally observed are the relative detection frequencies of single-photon detection, i.e., conditional probabilities of detection of single photons. Tomographic reconstruction of the polarization state at the single-photon level is more affected by detection imperfections (e.g., dark counts, afterpulses, etc.) than conventional polarimetry operating in the macroscopic optical regime. For this reason, proper reconstruction algorithms, such as maximum likelihood algorithms, are employed to reconstruct the physically meaningful polarization state of the single photons.142,149 This technique also allows one to reconstruct the evolution of the qubit states traveling and/or interacting in photonic devices through the formalism of quantum process tomography.163


Characterization of Detectors

The characterization of detectors is fundamental to characterizing single-photon devices, since current traceability of optical scales, i.e., the SI system, is based on cryogenic radiometers, which are detectors of optical power [Fig. 6(a)]. Free-space monochromatic radiation at the 100-μW power level can be measured with this technique, with an uncertainty around 0.005% (k=2).164,165

Fig. 6

(a) Principle of the cryogenic radiometer. The temperature change caused by incident optical radiation is compared with the electrical power required to change the temperature of the cavity by the same amount. (b) A prototype picowatt fiber-coupled radiometer made from a superconducting transition-edge sensor [(b) is reproduced from Ref. 166 with permission].


However, a cryogenic radiometer is simply a well-characterized instrument and, unless linked to a more fundamental concept, has the potential for unknown systematic errors or drifts that can then propagate into all other radiometric quantities. Comparisons with other traceability routes have been carried out, at least to uncertainty levels around 0.02%, confirming the underlying principle of cryogenic radiometry.3 In the discussion below on detection efficiency, we describe various alternatives to cryogenic radiometry that may, in time, achieve the necessary accuracy to enable such a test of cryogenic radiometry, although our focus in this review is their relevance to calibrating devices operating in the photon-counting regime.

An interesting development is a prototype microscale picowatt cryogenic radiometer for electrical substitution optical fiber power measurements [Fig. 6(b)].166 The absorber is a superconducting TES, and it, the electrical heater, and the thermometer are on a micromachined membrane of <1mm square. Initial measurements at 1550 nm with input powers from 50 fW to 20 nW (4.106 to 5.108photonss1) show a response inequivalence between electrical and optical power of 8%. A comparison of the response to electrical and optical input powers between 15 and 70 pW yields a repeatability better than ±0.3% (k=2). The system has a noise equivalent power of 5×1015WHz1/2.


Detection Efficiency

Detection efficiency can be measured by sending single photons onto the detector at a known repetition rate and recording the number of detection events. The detection efficiency is the ratio of detection events to incident photon events. An ideal SPS that emits only one photon within a predetermined temporal window at a known (and variable) repetition rate does not yet exist.


Substitution method

The traditional approach is the substitution method based on the comparison of a traceably calibrated reference device (detector) with the detector under test (DUT). The power of incident radiation (CW or pulsed and in the appropriate power regime) is measured with the reference detector. This power can then be further attenuated by a measurable amount (either through the use of a monitor detector operating at high power167 or calibrated attenuators) to the single-photon regime and used to calibrate the DUT.

The low power limit of a reference detector is determined by the noise floor of the detector and any amplification used to obtain a measureable signal. The large transimpedance value (>1011VA1) required to convert sub-picoampere-level photocurrents poses a series of challenges to the traditional current-to-voltage converter with a feedback resistor, such as noise amplification,168 long time constant, and a not negligible I/V conversion factor uncertainty (>0.1%). The switched integrator amplifier that employs a capacitor in place of the feedback resistor can offer a shorter time constant, overall better noise performance, and I/V conversion uncertainty better than 0.01%.169,170

Using an attenuation chain, a reference detector can be calibrated at the 100-pW level (108 to 109 photons per second) with an uncertainty of 0.1% (visible, free space) to 1% (1550 nm, fiber-coupled) (k=2).

Synchrotron radiation

A synchrotron can function as a variable attenuator since the radiant intensity of the synchrotron radiation can be adjusted by many decades in a controlled manner with low uncertainties. A traceably calibrated reference detector is used to measure the photon flux at high power (high current). The ring current is then reduced and the count rate of the DUT measured. The ratio of the ring currents yields the photon flux on the DUT.

The Schwinger equation 171 describes the spectral energy irradiated per solid angle by one electron moving on a circular arc, i.e., moving in a homogeneous magnetic field. Adapting this to electron storage rings, where the electron revolves, the Schwinger equation is multiplied by the revolution frequency ν, yielding the spectral radiant intensity for one stored electron. The spectral radiant power ΦSchwinger(λ,1e) is given by integration over the appropriate solid angle and can be calculated from theory. Synchrotron radiation can, therefore, be considered an absolute source. Its use in such a mode requires accurate knowledge of all the storage ring parameters entering into the calculation.172 Its application to absolute calibrations of detectors would require the theoretical consideration of the coupling losses into the DUT to be evaluated, which is not feasible for low uncertainty calibrations.

If N electrons are stored, which is equivalent to a stored electron beam current I=Neν, the spectral radiant power is written as Φλ(λ,N)=NΦSchwinger (λ,1e)[1+ε(λ)]. The parameter ε(λ) accounts for the influence of the finite vertical source size and vertical divergence of the stored electron beam. At the Metrology Light Source (MLS), the value of ε(λ), which is dependent on the wavelength and the vertical acceptance angle, is well below 104 for wavelengths longer than 100nm.172 The direct proportionality between radiant power and the number of stored electrons holds not only for bending magnet radiation as described above, but also for the radiation of devices, such as undulators, installed in the storage ring, which can produce radiation of a much higher power compared to bending magnet radiation. Therefore, the linearity of the reference detection system has to be known only in the microwatt power regime. At the MLS, the stored electron beam current can be varied by more than 11 decades from a maximum current of 200mA down to one stored electron (1 pA).173

Uncertainties (k=1) of 0.17% and 0.16% for the measurement of the detection efficiency of two Perkin-Elmer single-photon counting modules at 651 nm were achieved174 using a reference trap detector calibrated traceably to the Physikalisch-Technische Bundesanstalt cryogenic radiometer. The absolute photon rate per stored electron in the focus was determined in the high ring current regime, where the current can be measured with a relative standard uncertainty of better than 5.104. The ring current was then reduced to several hundred picoamperes, i.e., several hundred stored electrons, and the count rate of the DUT per stored electron was measured. Optical filters can adjust the calibration wavelength to any desired value covered by the synchrotron radiation spectrum. Recent work175 has extended this technique to fiber-coupled SNSPDs.


Predictable quantum efficient detector

A potential alternative to cryogenic radiometry for obtaining traceability to the SI is the predictable quantum efficient detector. It comprises two custom-made induced-junction silicon photodiodes operated under reverse bias voltage and arranged in a wedge light-trap configuration (Fig. 7).176177.178 Its spectral response can, in principle, be calculated from measurements of the specular and diffuse reflectances of the photodiodes, together with calculation of the intrinsic quantum deficiency. Comparison with cryogenic radiometry has shown agreement at the 0.01% level, and its nonlinearity of response has been measured to be <0.02% from 100 pW to 400 μW.177 This device could, therefore, provide traceability around the 0.02% uncertainty level for visible wavelength gigahertz photon fluxes.

Fig. 7

The arrangement of photodiodes in the predictable quantum efficient detector. The incident beam undergoes seven reflections before the residual beam exits, leading to an overall reflectance of <3 parts in 104.



Stimulated emission

Another alternative to cryogenic radiometry is a method for absolutely measuring the radiance of a fiber-coupled source at 1542nm.179,180 This compares the spontaneous emission of an erbium amplifier to the emission stimulated by the source. Using spontaneous emission as a standard was originally proposed in 1970s181,182 and was implemented using SPDC in bulk crystals,183,184 but the free-space nature of the setup made it challenging to accurately define the number of spatial modes involved. The method operates best at the one photon/mode level, which is 7nW at 1550 nm, and has so far demonstrated uncertainties around the 1% level. A detector of known relative spectral response can be used to transfer this to measurements at other wavelengths and the power level attenuated to the single photon level for calibrating a photon counter.


Photon statistics

The methods described in Secs. 5.1.1 to 5.1.3 will, at some point, include a comparison between measuring incident optical power with an analog detector, whose response is linear (in the appropriate power regime) with respect to the incoming photon flux, and measuring the response to this or an attenuated flux with a photon-counting detector. Laser light (Poissonian light) and thermal light sources have photon statistics which both give rise to multiple photon events. These have to be taken into account when calibrating non-PNR detectors.101,185,186. A convenient way of analyzing this is to model a detector with finite detection efficiency η by an ideal detector (η=1) placed behind a beam splitter with transmittance τ=η. The ideal detector’s response to a train of pulses with photon statistics pn is to always indicate a detection event except for the case in which zero photons are in a pulse. Hence, the probability pdet for a real detector to detect a photon event is given by


where pnη is given by the Bernouilli transformation of the incoming photon statistics pm.



The case of incoming Poissonian light is easy to analyze, since the Bernouilli transformation leads to another Poissonian distribution, with the mean photon number reduced from μ to η μ; hence (Fig. 8)



Fig. 8

Analysis for measurements involving a Poissonian distribution incident on a non-photon-number resolving detector of detection efficiency η. The input Poissonian distribution PA (mean photon number μ) is transformed into another Poissonian distribution PB (mean photon number ημ) after the beam splitter.


In order to obtain η from a measured pdet and known μ, we rearrange Eq. (4) as follows:



Conversely (Sec. 4.4), if we wish to measure μ with a detector of known η, we rearrange Eq. (4) as



Figure 9 illustrates the effect of different photon probability distributions on pdet.

Fig. 9

Ratio Q of the count rates between a SPAD detector (detection efficiency, η=0.6) and an ideal detector, as a function of the mean photon number.



Heralded single photons

An alternative technique to the traditional one of radiometric substitution is based on the use of parametric downconversion (Sec. 2.1.1) to produce a heralded SPS.19,20 Detection of one of the downconverted photons (by a single-photon detector) heralds the existence of its twin, which can be directed to the DUT (Fig. 10). This approach still suffers from multiple photon events, and various experiments187188.189.190.191 have been carried out to demonstrate the equivalence of the two methods at the photon-counting level. However, optical scales remain based on cryogenic radiometry since the lowest uncertainty so far achieved with the heralded single-photon approach (0.18%) (at the single-photon level) is over an order of magnitude less accurate that that based on cryogenic radiometry (0.005%) (at the 100-μW level). This is mainly due to the need to estimate the absorption in the path the heralded photon takes from the point of creation within the nonlinear medium until it is incident on the detector, which may include geometrical or absorptive spectral filtering. The method suffers from limited spectral tunability at high accuracy and is limited to detectors that are either free-running or can be randomly gated. At present, the importance of this technique lies in the fact that it establishes an absolute means of measuring detection efficiency which is independent of cryogenic radiometry, and operates in the single-/few-photon regime.

Fig. 10

Schematic of heralded single-photon setup. All optics for spectral filtering is placed in the heralding arm. ηA=NC/NB; the detection efficiency of the herald detector does not need to be known, but does affect the time required to obtain good statistics.



Extensions of the heralded photon technique for PNR detectors

The extension of Klyshko’s technique (Sec. 5.1.5) to other kinds of single-photon detector is quite straightforward, with careful consideration of any nonidealities associated with the detection model. For example, for a PNR detector, a generalized version of Klyshko’s technique accommodating the photon number resolving ability of the detector has been implemented.192

Another calibration technique for a PNR detector inspired by Klyshko’s technique, but explicitly taking into account multiple twin-photon events produced in the SPDC process, utilizes the PNR detector’s capability to measure the photon-number distribution of an optical mode.193 Using two PNR detectors, the joint photon-number statistics between the two electromagnetic field modes of the PDC source, including photon-number correlations and individual photon-number distributions, can be determined. For each element of the resulting joint photon statistics, one can find a formula giving the quantum efficiencies of the two PNR detectors. Optimization techniques are necessary to estimate the detector efficiencies from the increased photon number of measurements. A drawback of this technique is that it is strongly dependent on the probabilistic detection model assumed (e.g., the Bernoulli model), which should be correct in its entirety not just in terms of mean values (as is the case for Klyshko’s technique). Inadequacies in the assumptions immediately propagate to the accuracy of the estimation of photon detection efficiency. Another drawback is the use of an optimization algorithm that, in general, does not yield a provable uncertainty estimation.


Dark Count Probability

The dark count probability of a detector can be measured by recording detection events per gate or per unit time in the absence of photon flux illuminating the detector’s sensitive area. To perform the measurements, a counting device records the detector’s output signal. In order to count only detection events during gates, a time-correlated photon-counting device can be used to record the detector output signal.


After-Pulse Probability

In SPAD detectors, charge carriers created during the avalanche process become trapped at atomic defect sites in the multiplication region. The subsequent detrapping of these carriers at a later time can trigger spurious additional avalanches known as after-pulses. After-pulses are a type of dark count, but unlike other dark count mechanisms—such as thermal excitations or tunneling effects—that occur randomly in time, after-pulses are strongly correlated to previous avalanches during which trap sites were populated.194

The preferred measurement sequence for a detector that exhibits after-pulsing is to measure the dark count probability, followed by the after-pulse probability194,195 and then the detection efficiency, as described by Yuan et al.85

The detector is illuminated by a pulsed laser source attenuated to the single-photon level. The laser and detector are triggered by a pulse generator, where the laser pulse frequency is stepped down by an integer factor R compared to the detector gate rate. The arrival of the laser pulses at the detector is synchronized to occur during the detector gates. A time-correlated photon counting device is used to record a time histogram of laser triggers and detections. At zero time delay with respect to the laser pulse, the histogram peak is composed of detection events observed under laser light illumination (plus dark counts). Peaks at a time delay in this histogram not corresponding to an illuminated gate are generated by photon events caused by the after-pulse effect (and dark counts). By normalizing the detected count rate to the total number of applied gates, the total after-pulse probability can be calculated using Eq. (7), where Ci and Cni are the average number of counts per illuminated and nonilluminated gate, and Cd is the number of dark counts, calculated from the previously established dark count probability.



With knowledge of the dark count probability pd and the after-pulse probability pafter, the photon detection probability pdet can be obtained from Eq. (8). pi is the probability to detect a photon at each illuminated gate and is given by Ci/Ni, where Ni is the total number of illuminated gates



The detection efficiency can then be calculated from Eq. (5). The mean number of photons per laser pulse, μ, can be obtained by calibrating the attenuated laser source against a traceable standard. The latter is currently not available at the single-photon level. A practical solution is to use a calibrated detector to measure the power for a given pulse repetition rate and then use a calibrated attenuator to reduce the pulse photon number to the single-photon level. Figure 11 shows an example of data collected using this technique. The after-pulse probability can also be analysed as a function of time after a ‘true’ detection, and this is illustrated in Fig. 12.

Fig. 11

Example of data collected using the method described in Sec. 5.3. Thick red lines indicate laser pulse triggers. Narrow blue lines correspond to detections. The illuminated gate is to the immediate right of the corresponding laser pulse trigger.


Fig. 12

After-pulse plus dark count probability of a gated InGaAs detector, measured as a function of time after an incident optical pulse. The detector was gated at 4 MHz, and the laser at 4MHz/256=15.625kHz. The maximum time after a pulse of 63.75 ms corresponds to 255 gates. At long times, the probability approaches the dark count level. [Data & figure courtesy G. Lepert, NPL, 2014]



Dead Time, Reset Time, and Recovery Times

These parameters limit the maximum count rate of a single-photon detector. There are differing definitions of these terms in the literature, and we shall adapt those given by Migdall et al.18 After a detection event, there will be a time interval when the detector as a whole is unable to provide an output in response to incoming photons at the single-photon level, which may be due to intrinsic processes within the detector or its control electronics. We shall call this the dead time, tdead. After the dead time has elapsed, the detector is able to detect incident photons; however, it may take some further time before its detection efficiency recovers to its steady-state value. We shall call this the reset time, treset. We shall define the sum of these times as the recovery time, trecovery, i.e., trecovery=tdead+treset. If the detector recovers to its normal value slowly, it may be useful to specify a shorter recovery time where the detection efficiency is some fraction (e.g., 90%) of the final value. We shall call this the partial recovery time, tpartialrecovery. We note that in the literature, trecovery has sometimes been defined as the dead time.196

The dead time, reset time, and recovery times can be measured using the two-pulse method.196197.198 A train of double pulses of equal intensity, separated by a tunable time Δt and attenuated to the single-photon level, are sent to the detector. In the case of gated detectors, the photons will be synchronized to the detector gates and their time separation incremented in steps of a gating period. The probabilities of detecting the first photon, p1, the second photon, p2, and both photons, p12, will be recorded as a function of their time separation by recording detections for several incident pairs of pulses at each time separation. The time between pairs of pulses should be able to be made large enough to exceed the expected recovery time and, in the case of SPAD detectors, ensure a negligible after-pulse probability. We note that



From Fig. 13, p12 will be zero for Δt=0, and then will become nonzero at some point Δt=tdead. In order to estimate tfullrecovery, i.e., the point at which, by our definition, p2=p1, we find the value of Δt for which



Fig. 13

Detection efficiency as a function of time (adapted from Ref. 18).


Similarly, estimation of tpartialrecovery at the 90% level requires finding the value of Δt for which



A check can be made that p1=p2 for Δttrecovery, i.e., where the effect of after-pulses is negligible.


Maximum Count Rate

To measure the achievable maximum count rate, the detector is illuminated by pulsed laser light at the same frequency of the detector gating rate, corresponding to an illumination pulse every detector gate. By measuring the detector count rate as a function of the photon flux, the number of detection events per gate will saturate at the detection rate limit of the SPAD. The results can be compared with the prediction of the maximum count rate as a function of the detection efficiency and dead time of the detector.


Timing Jitter

To ensure good timing resolution of a single-photon detector, the time interval between the absorption of a photon and the generation of an output electrical signal should be stable, corresponding to a small timing jitter. A common technique to determine this parameter is to measure the full-width half-maximum (FWHM) of the detector’s instrument response function. For that purpose, the FWHM of the laser pulses illuminating the detector should be less than the timing jitter (typically >100ps) of the detector. By correlating many detection events with the trigger signal of the laser, a time delay histogram can be observed by a time-correlated counter, from which the detector’s response function can be calculated. Many detectors have non-Gaussian and asymmetric response functions which can be taken into account in a detailed analysis.


Positive-Operator Valued Measure Reconstruction

Detector characterization is normally carried out by measuring the parameters of a trusted model describing the detector operation. Where characterization of the mode of operation of a detector without preliminary assumptions is needed, quantum detector tomography may present the ideal solution. It consists of determining the positive-operator valued measure (POVM) corresponding to the detection process, i.e., given an input quantum optical state, POVM is the operator that determines the probability of having a certain macroscopic output signal from the detector.

Measurements with a quorum of probe states enable a complete determination of the POVM of a detector to be achieved. Experiments have been performed on phase-insensitive199200.201 and phase-sensitive202 PNR detectors using coherent states as probes. As usual with tomographic techniques, experimental errors and statistical fluctuations may lead to unphysical POVM elements, and specific optimization algorithms constraining POVM elements to be physical should be employed.

POVM extraction with a large quorum of probe states suffers from slow convergence,199,201 and it was shown203 that taking advantage of quantum resources (e.g., entanglement) can increase the speed of convergence. Taking advantage of quantum correlations with an ancillary state, a first experimental POVM reconstruction was carried out.204 Here, it was assumed that the POVM was diagonal in the Fock (photon number) basis, as was the case in most of the previous POVM reconstructions discussed,199,201 while only in the case of Natarajan et al.202 were nondiagonal POVM elements considered.


Summary and Forward Look

Measurements that were once concerned with basic research are now required to validate devices that are components of emerging industrial technologies and applications based on the production, manipulation, and detection of single- and classically and nonclassically correlated photons.

A current example of this relates to QKD; an industry specification group of the European Standards Institute (ETSI) is addressing standardization issues for faint-pulse phase-encoded QKD over fiber.205 One aspect of this is the drafting of specifications for measuring the optical performance of these systems. This requires measurement of various properties of laser pulses attenuated to single-photon level, as well as of single-photon detectors.

As the manipulation of photons and photon–matter interactions becomes more widely used in industrial applications, additional metrics and measurement methods will be required for characterizing photon states and detectors. QKD and QRNG systems drive the need for faster and more efficient detectors which do not need cryogenic cooling. Deterministic sources of single- and entangled-photons continue to be heavily researched, and their realization is likely to herald an explosion of applications. In quantum technologies, there is a movement away from large devices, which have to be mounted on a table-top or breadboard, toward integrated circuits. While detector and source metrology has already made the step from free space to fiber-coupled devices, another step will be to further transfer this measurement capability onto devices embedded or fabricated in on-chip optical integrated circuits. A similar process is occurring in the medical diagnostics field, where lab-on-a-chip technology is under development.

The move to define all of the SI base units in terms of fundamental constants opens up the prospect for directly realizing absolute scales in situ, rather than by a traceability chain to instrumentation maintained in a metrological institute. The metrology of single-photon sources and detectors will continue to face many exciting challenges.


The authors acknowledge funding from projects MIQC (contract IND06) and SIQUTE (contract EXL02) of the European Metrology Research Programme (EMRP). EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union. C.J.C. and A.G.S. also acknowledge funding from the National Measurement Office of the U.K. Department of Business, Innovation and Skills. I.P.D. also acknowledges funding from FIRB “Future in Research 2010” project (CUP code: D11J11000450001) funded by the Italian Ministry for Teaching, University and Research (MIUR).


1. Bureau International des Poids et Mesures, “Traceability,”  http://www.bipm.org/en/convention/wmd/2004/traceability.html (24 February 2014). Google Scholar

2. N. P. Fox, “Primary radiometric quantities and units,” Metrologia 37(5), 507–513 (2000).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/37/5/36 Google Scholar

3. J. C. Zwinkelset al., “Photometry, radiometry and ‘the candela’: evolution in the classical and quantum world,” Metrologia 47(5), R15–R32 (2010).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/47/5/R01 Google Scholar

4. E. Theocharouset al., “The characterisation of the linearity of response and spatial uniformity of response of two InGaAs/InP Geiger-mode avalanche photodiodes,” IEEE J. Quantum Electron. 46(11), 1561–1567 (2010).IEJQA70018-9197 http://dx.doi.org/10.1109/JQE.2010.2053196 Google Scholar

5. E. KnillR. LaflammeG. J. Milburn, “A scheme for efficient quantum computation with linear optics,” Nature 409(6816), 46–52 (2001).NATUAS0028-0836 http://dx.doi.org/10.1038/35051009 Google Scholar

6. J. L. O'Brien, “Optical quantum computing,” Science 318(5856), 1567–1570 (2007).SCIEAS0036-8075 http://dx.doi.org/10.1126/science.1142892 Google Scholar

7. J. L. O'BrienA. FurusawaJ. Vučković, “Photonic quantum technologies,” Nature Photon. 3(12), 687–695 (2009).1749-4885 http://dx.doi.org/10.1038/nphoton.2009.229 Google Scholar

8. V. GiovannettiS. LloydL. Maccone, “Quantum-enhanced measurements: beating the standard quantum limit,” Science 306(5700), 1330–1336 (2004).SCIEAS0036-8075 http://dx.doi.org/10.1126/science.1104149 Google Scholar

9. B. M. EscherR. L. d. M. FilhoL. Davidovich, “General framework for estimating the ultimate precision limit in noisy quantum-enhanced metrology,” Nature Phys. 7(5), 406–411 (2011).NPAHAX1745-2473 http://dx.doi.org/10.1038/nphys1958 Google Scholar

10. V. GiovannettiS. LloydL. Maccone, “Advances in quantum metrology,” Nature Photon. 5(4), 222–229 (2011).1749-4885 http://dx.doi.org/10.1038/nphoton.2011.35 Google Scholar

11. S. Steinlechneret al., “Quantum-dense metrology,” Nature Photon. 7(8), 626–630 (2013).1749-4885 http://dx.doi.org/10.1038/nphoton.2013.150 Google Scholar

12. M. OxborrowA. G. Sinclair, “Single-photon sources,” Contemp. Phys. 46(3), 173–206 (2005).CTPHAF0010-7514 http://dx.doi.org/10.1080/00107510512331337936 Google Scholar

13. B. LounisM. Orrit, “Single-photon sources,” Rep. Prog. Phys. 68(5), 1129–1179 (2005).RPPHAG0034-4885 http://dx.doi.org/10.1088/0034-4885/68/5/R04 Google Scholar

14. A. J. Shields, “Semiconductor quantum light sources,” Nature Photon. 1(4), 215–223 (2007).1749-4885 http://dx.doi.org/10.1038/nphoton.2007.46 Google Scholar

15. I. Aharonovichet al., “Diamond-based single-photon emitters,” Rep. Prog. Phys. 74(7), 076501 (2011).RPPHAG0034-4885 http://dx.doi.org/10.1088/0034-4885/74/7/076501 Google Scholar

16. M. D. Eisamanet al., “Invited review article: single-photon sources and detectors,” Rev. Sci. Instrum. 82(7), 071101 (2011).RSINAK0034-6748 http://dx.doi.org/10.1063/1.3610677 Google Scholar

17. S. BuckleyK. RivoireJ. Vučković, “Engineered quantum dot single-photon sources,” Rep. Prog. Phys. 75(12), 126503 (2012).RPPHAG0034-4885 http://dx.doi.org/10.1088/0034-4885/75/12/126503 Google Scholar

18. A. Migdallet al., Eds., Single-Photon Generation and Detection: Physics and Applications, Academic Press, Oxford (2013). Google Scholar

19. Y. B. Zel’dovichD. N. Klyshko, “Field statistics in parametric luminescence,” JETP Lett. 9(1), 40–43 (1969).JTPLA20021-3640 Google Scholar

20. D. C. BurnhamD. L. Weinberg, “Observation of simultaneity in parametric production of optical photon pairs,” Phys. Rev. Lett. 25(2), 84–87 (1970).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.25.84 Google Scholar

21. P. G. Kwiatet al., “New high-intensity source of polarisation entangled photon pairs,” Phys. Rev. Lett. 75(24), 4337–4341 (1995).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.75.4337 Google Scholar

22. P. G. Kwiat, “Hyper-entangled states,” J. Mod. Opt. 44(11/12), 2173–2184 (1997).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500349708231877 Google Scholar

23. L. E. Myerset al., “Quasi-phase-matched optical parametric oscillators in bulk periodically poled LiNbO3,” J. Opt. Soc. Am. B 12(11), 2102–2116 (1995).JOBPDE0740-3224 http://dx.doi.org/10.1364/JOSAB.12.002102 Google Scholar

24. S. Tanzilliet al., “Highly efficient photon-pair source using a periodically poled lithium niobate waveguide,” Electron. Lett. 37(1), 26–28 (2001).ELLEAK0013-5194 http://dx.doi.org/10.1049/el:20010009 Google Scholar

25. G. Harderet al., “An optimized photon pair source for quantum circuits,” Opt. Express 21(12), 13975–13985 (2013).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.21.013975 Google Scholar

26. R. Ursinet al., “Entanglement-based quantum communication over 144 km,” Nature Phys. 3(7), 481–485 (2007).NPAHAX1745-2473 http://dx.doi.org/10.1038/nphys629 Google Scholar

27. G. Bridaet al., “An extremely low-noise heralded single-photon source: a breakthrough for quantum technologies,” Appl. Phys. Lett. 101(22), 221112 (2012).APPLAB0003-6951 http://dx.doi.org/10.1063/1.4768288 Google Scholar

28. X.-S. Maet al., “Experimental generation of single photons via active multiplexing,” Phys. Rev. A 83(4), 043814 (2011).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.83.043814 Google Scholar

29. J. E. SharpingM. FiorentinoP. Kumar, “Observation of twin-beam-type quantum correlation in optical fiber,” Opt. Lett. 26(6), 367–369 (2001).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.26.000367 Google Scholar

30. J. G. Rarityet al., “Photonic crystal fiber source of correlated photon pairs,” Opt. Express 13(2), 534–544 (2005).OPEXFF1094-4087 http://dx.doi.org/10.1364/OPEX.13.000534 Google Scholar

31. J. B. Springet al., “On-chip low loss heralded source of pure single photons,” Opt. Express 21(11), 13522–13532 (2013).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.21.013522 Google Scholar

32. M. J. Collinset al., “Integrated spatial multiplexing of heralded single-photon sources,” Nat. Commun. 4, 2582 (2013).2041-1723 http://dx.doi.org/10.1038/ncomms3582 Google Scholar

33. J. W. Silverstoneet al., “On-chip quantum interference between silicon photon-pair sources,” Nat. Photon. 8(2), 104–108 (2013).1749-4885 http://dx.doi.org/10.1038/nphoton.2013.339 Google Scholar

34. H. Takahashiet al., “An integrated fiber trap for single-ion photonics,” New J. Phys. 15(5), 053011 (2013).NJOPFM1367-2630 http://dx.doi.org/10.1088/1367-2630/15/5/053011 Google Scholar

35. B. B. Blinovet al., “Observation of entanglement between a single trapped atom and a single photon,” Nature 428(6979), 153–157 (2004).NATUAS0028-0836 http://dx.doi.org/10.1038/nature02377 Google Scholar

36. D. L. Moehringet al., “Experimental Bell inequality violation with an atom and a photon,” Phys. Rev. Lett. 93(9), 090410 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.93.090410 Google Scholar

37. D. L. Moehringet al., “Entanglement of single-atom quantum bits at a distance,” Nature 449(7158), 68–71 (2007).NATUAS0028-0836 http://dx.doi.org/10.1038/nature06118 Google Scholar

38. S. Olmschenket al., “Quantum teleportation between distant matter qubits,” Science 323(5913), 486–489 (2009).SCIEAS0036-8075 http://dx.doi.org/10.1126/science.1167209 Google Scholar

39. P. Maunzet al., “Quantum interference of photon pairs from two remote trapped atomic ions,” Nat. Phys. 3(8), 538–541 (2007).NPAHAX1745-2473 http://dx.doi.org/10.1038/nphys644 Google Scholar

40. M. Kelleret al., “Continuous generation of single photons with controlled waveform in an ion-trap cavity system,” Nature 431(7012), 1075–1078 (2004).NATUAS0028-0836 http://dx.doi.org/10.1038/nature02961 Google Scholar

41. A. KuhnM. HennrichG. Rempe, “Deterministic single-photon source for distributed quantum networking,” Phys. Rev. Lett. 89(6), 067901 (2002).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.89.067901 Google Scholar

42. T. Legeroet al., “Quantum beat of two single photons,” Phys. Rev. Lett. 93(7), 070503 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.93.070503 Google Scholar

43. M. Hijlkemaet al., “A single-photon server with just one atom,” Nat. Phys. 3(4), 253–255 (2007).NPAHAX1745-2473 http://dx.doi.org/10.1038/nphys569 Google Scholar

44. T. Wilket al., “Single-atom single-photon quantum interface,” Science 317(5837), 488–490 (2007).SCIEAS0036-8075 http://dx.doi.org/10.1126/science.1143835 Google Scholar

45. S. Ritteret al., “An elementary quantum network of single atoms in optical cavities,” Nature 484(7393), 195–200 (2012).NATUAS0028-0836 http://dx.doi.org/10.1038/nature11023 Google Scholar

46. C. Santoriet al., “Triggered single photons from a quantum dot,” Phys. Rev. Lett. 86(8), 1502–1505 (2001).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.86.1502 Google Scholar

47. Z. L. Yuanet al., “Electrically driven single-photon source,” Science 295(5552), 102–105 (2002).SCIEAS0036-8075 http://dx.doi.org/10.1126/science.1066790 Google Scholar

48. M. Peltonet al., “Efficient source of single photons: a single quantum dot in a micropost microcavity,” Phys. Rev. Lett. 89(23), 233602 (2002).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.89.233602 Google Scholar

49. A. J. Bennettet al., “High performance single photon sources from photolithographically defined pillar microcavities,” Opt. Express 13(1), 50–55 (2005).OPEXFF1094-4087 http://dx.doi.org/10.1364/OPEX.13.000050 Google Scholar

50. D. Fattalet al., “Entanglement formation and violation of Bell’s inequality with a semiconductor single photon source,” Phys. Rev. Lett. 92(3), 037903 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.92.037903 Google Scholar

51. D. Fattalet al., “Quantum teleportation with a quantum dot single photon source,” Phys. Rev. Lett. 92(3), 037904 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.92.037904 Google Scholar

52. R. M. Stevensonet al., “A semiconductor source of triggered entangled photon pairs,” Nature 439(7073), 179–182 (2006).NATUAS0028-0836 http://dx.doi.org/10.1038/nature04446 Google Scholar

53. R. J. Younget al., “Improved fidelity of triggered entangled photons from single quantum dots,” New J. Phys. 8(2), 29 (2006).NJOPFM1367-2630 http://dx.doi.org/10.1088/1367-2630/8/2/029 Google Scholar

54. A. J. Bennettet al., “Indistinguishable photons from a diode,” Appl. Phys. Lett. 92(19), 193503 (2008).APPLAB0003-6951 http://dx.doi.org/10.1063/1.2918841 Google Scholar

55. D. Englundet al., “Resonant excitation of a quantum dot strongly coupled to a photonic crystal nanocavity,” Phys. Rev. Lett. 104(7), 073904 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.104.073904 Google Scholar

56. C. Kurtsieferet al., “Stable solid-state source of single photons,” Phys. Rev. Lett. 85(2), 290–293 (2000).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.85.290 Google Scholar

57. A. Faraonet al., “Resonant enhancement of the zero-phonon emission from a colour centre in a diamond cavity,” Nat. Photon. 5(5), 301–305 (2011).1749-4885 http://dx.doi.org/10.1038/nphoton.2011.52 Google Scholar

58. A. Faraonet al., “Coupling of nitrogen-vacancy centers to photonic crystal cavities in monocrystalline diamond,” Phys. Rev. Lett. 109(3), 033604 (2012).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.109.033604 Google Scholar

59. R. Albrechtet al., “Coupling of a single nitrogen-vacancy center in diamond to a fiber-based microcavity,” Phys. Rev. Lett. 110(24), 243602 (2013).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.110.243602 Google Scholar

60. J. E. Kennardet al., “On-chip manipulation of single photons from a diamond defect,” Phys. Rev. Lett. 111(21), 213603 (2013).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.111.213603 Google Scholar

61. C. Brunelet al., “Triggered source of single photons based on controlled single molecule fluorescence,” Phys. Rev. Lett. 83(14), 2722–2725 (1999).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.83.2722 Google Scholar

62. B. LounisW. E. Moerner, “Single photons on demand from a single molecule at room temperature,” Nature 407(6811), 491–493 (2000).NATUAS0028-0836 http://dx.doi.org/10.1038/35035032 Google Scholar

63. R. Lettowet al., “Quantum interference of tunably indistinguishable photons from remote organic molecules,” Phys. Rev. Lett. 104(12), 123605 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.104.123605 Google Scholar

64. K.-G. Leeet al., “Spontaneous emission enhancement of a single molecule by a double-sphere nanoantenna across an interface,” Opt. Express 20(21), 23331–23338 (2012).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.20.023331 Google Scholar

65. K.-G. Leeet al., “A planar dielectric antenna for directional single-photon emission and near-unity collection efficiency,” Nat. Photon. 5(3), 166–169 (2011).1749-4885 http://dx.doi.org/10.1038/nphoton.2010.312 Google Scholar

66. X. W. ChenS. GötzingerV. Sandoghdar, “99% efficiency in collecting photons from a single emitter,” Opt. Lett. 36(18), 3545–3547 (2011).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.36.003545 Google Scholar

67. J. Claudonet al., “A highly efficient single-photon source based on a quantum dot in a photonic nanowire,” Nat. Photon. 4(3), 174–177 (2010).1749-4885 http://dx.doi.org/10.1038/nphoton.2009.287 Google Scholar

68. M. Munschet al., “Dielectric GaAs antenna ensuring an efficient broadband coupling between an InAs quantum dot and a Gaussian optical beam,” Phys. Rev. Lett. 110(17), 177402 (2013).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.110.177402 Google Scholar

69. R. H. Hadfield, “Single-photon detectors for optical quantum information applications,” Nat. Photon. 3(11), 609–705 (2009).1749-4885 http://dx.doi.org/10.1038/nphoton.2009.230 Google Scholar

70. G. A. Morton, “Photomultipliers for scintillation counting,” RCA Rev. 10, 525–553 (1949).RCARCI0033-6831 Google Scholar

71. H. Kumeet al., “Ultrafast microchannel plate photomultpliers,” Appl. Opt. 27(6), 1170–1178 (1988).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.27.001170 Google Scholar

72. S. CovaA. LongoniA. Andreoni, “Towards picoseconds resolution with single-photon avalanche diodes,” Rev. Sci. Instrum. 52(3), 408–412 (1981).RSINAK0034-6748 http://dx.doi.org/10.1063/1.1136594 Google Scholar

73. R. G. W. BrownK. D. RidleyJ. G. Rarity, “Characterization of silicon avalanche photodiodes for photon correlation measurements. 1: Passive quenching,” Appl. Opt. 25(22), 4122–4126 (1986).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.25.004122 Google Scholar

74. R. G. W. Brownet al., “Characterization of silicon avalanche photodiodes for photon correlation measurements. 2. Active quenching,” Appl. Opt. 26(12), 2383–2389 (1987).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.26.002383 Google Scholar

75. S. Covaet al., “Evolution and prospects for single-photon avalanche diodes and quenching circuits,” J. Mod. Opt. 51(9–10), 1267–1288 (2004).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340408235272 Google Scholar

76. A. Lacaitaet al., “Single-photon detection beyond 1 μm: performance of commercially available InGaAs/InP detectors,” Appl. Opt. 35(16), 2986–2996 (1996).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.35.002986 Google Scholar

77. G. Ribordyet al., “Performance of InGaAs/InP avalanche photodiodes as gated-mode photon counters,” Appl. Opt. 37(12), 2272–2277 (1998).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.37.002272 Google Scholar

78. J. G. Rarityet al., “Single-photon counting for the 1300-1600-nm range by use of Peltier-cooled and passively quenched InGaAs avalanche photodiodes,” Appl. Opt. 39(36), 6746–6753 (2000).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.39.006746 Google Scholar

79. P. A. Hiskettet al., “Performance and design of InGaAs/InP photodiodes for single-photon counting at 1.55 um,” Appl. Opt. 39(36), 6818–6829 (2000).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.39.006818 Google Scholar

80. M. A. Itzleret al., “Advances in InGaAsP-based avalanche diode single photon detectors,” J. Mod. Opt. 58(3–4), 174–200 (2011).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340.2010.547262 Google Scholar

81. R. T. Thewet al., “Free-running InGaAs/InP avalanche photodiode with active quenching for single photon counting at telecom wavelengths,” Appl. Phys. Lett. 91(20), 201114 (2007).APPLAB0003-6951 http://dx.doi.org/10.1063/1.2815916 Google Scholar

82. R. E. WarburtonM. ItzlerG. S. Buller, “Free-running room temperature operation of an InGaAs/InP single-photon avalanche diode,” Appl. Phys. Lett. 94(7), 071116 (2009).APPLAB0003-6951 http://dx.doi.org/10.1063/1.3079668 Google Scholar

83. N. Gisinet al., “Quantum cryptography,” Rev. Mod. Phys. 74(1), 145–195 (2002).RMPHAT0034-6861 http://dx.doi.org/10.1103/RevModPhys.74.145 Google Scholar

84. N. NamekataS. SasamoriS. Inoue, “800 MHz single-photon detection at 1550-nm using an InGaAs/InP photodiode operated with a sine wave gating,” Opt. Express 14(21), 10043–10049 (2006).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.14.010043 Google Scholar

85. Z. L. Yuanet al., “High speed single photon detection in the near infrared,” Appl. Phys. Lett. 91(4), 041114 (2007).APPLAB0003-6951 http://dx.doi.org/10.1063/1.2760135 Google Scholar

86. Z. L. Yuanet al., “Multi-gigahertz operation of photon counting InGaAs avalanche photodiodes,” Appl. Phys. Lett. 96(7), 071101 (2010).APPLAB0003-6951 http://dx.doi.org/10.1063/1.3309698 Google Scholar

87. A. R. Dixonet al., “Gigahertz decoy quantum key distribution with 1 Mbit/s secure key rate,” Opt. Express 16(23), 18790–18797 (2008).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.16.018790 Google Scholar

88. M. A. AlbotaF. N. C. Wong, “Efficient single-photon counting at 1.55 μm by means of frequency upconversion,” Opt. Lett. 29(13), 1449–1451 (2004).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.29.001449 Google Scholar

89. A. P. VandevenderP. G. Kwiat, “High efficiency single-photon detection via frequency up-conversion,” J. Mod. Opt. 51(9–10), 1433–1445 (2004).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340408235283 Google Scholar

90. C. Langrocket al., “Highly efficient single-photon detection at communication wavelengths by use of upconversion in reverse-proton exchanged periodically poled LiNbO3 waveguides,” Opt. Lett. 30(13), 1725–1727 (2005).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.30.001725 Google Scholar

91. R. T. Thewet al., “Low jitter up-conversion detectors for telecom wavelength GHz QKD,” New J. Phys. 8(3), 32 (2006).NJOPFM1367-2630 http://dx.doi.org/10.1088/1367-2630/8/3/032 Google Scholar

92. G. N. Gol’tsmanet al., “Picosecond superconducting single-photon optical detector,” Appl. Phys. Lett. 79(6), 705–707 (2001).APPLAB0003-6951 http://dx.doi.org/10.1063/1.1388868 Google Scholar

93. K. S. Il’inet al., “Picosecond hot-electron energy relaxation in NbN superconducting photodetectors,” Appl. Phys. Lett. 76(19), 2752–2754 (2000).APPLAB0003-6951 http://dx.doi.org/10.1063/1.126480 Google Scholar

94. A. Verevkinet al., “Detection efficiency of large-active-area NbN single-photon superconducting detectors in the ultraviolet to near-infrared range,” Appl. Phys. Lett. 80(25), 4687–4689 (2002).APPLAB0003-6951 http://dx.doi.org/10.1063/1.1487924 Google Scholar

95. K. M. Rosfjordet al., “Nanowire single-photon detector with an integrated optical cavity and anti-reflection coating,” Opt. Express 14(2), 527–534 (2006).OPEXFF1094-4087 http://dx.doi.org/10.1364/OPEX.14.000527 Google Scholar

96. F. Marsiliet al., “Detecting single infrared photons with 93% system efficiency,” Nat. Photon. 7(3), 210–214 (2013).1749-4885 http://dx.doi.org/10.1038/nphoton.2013.13 Google Scholar

97. H. Paulet al., “Photon chopping: new way to measure the quantum state of light,” Phys. Rev. Lett. 76(14), 2464–2467 (1996).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.76.2464 Google Scholar

98. K. BanaszekI. A. Walmsley, “Photon counting with loop detector,” Opt. Lett. 28(1), 52–54 (2003).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.28.000052 Google Scholar

99. M. J. Fitchet al., “Photon-number resolution using time-multiplexed single-photon detectors,” Phys. Rev. A 68(4), 043814 (2003).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.68.043814 Google Scholar

100. D. Achilleset al., “Fiber-assisted detection with photon number resolution,” Opt. Lett. 28(23), 2387–2389 (2003).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.28.002387 Google Scholar

101. C. Silberhorn, “Detecting quantum light,” Contemp. Phys. 48(3), 147–156 (2007).CTPHAF0010-7514 http://dx.doi.org/10.1080/00107510701662538 Google Scholar

102. A. Divochiyet al., “Superconducting nanowire photon-number-resolving detector at telecommunication wavelengths,” Nat. Photon. 2(5), 302–306 (2008).1749-4885 http://dx.doi.org/10.1038/nphoton.2008.51 Google Scholar

103. P. Eraerdset al., “SiPM for fast photon-counting and multiphoton detection,” Opt. Express 15(22), 14539–14549 (2007).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.15.014539 Google Scholar

104. F. Zappaet al., “An integrated active-quenching circuit for single-photon avalanche diodes,” IEEE Trans. Instrum. Meas. 49(6), 1167–1175 (2000).IEIMAO0018-9456 http://dx.doi.org/10.1109/19.893251 Google Scholar

105. L. A. JiangE. A. DaulerJ. T. Chang, “Photon-number-resolving detector with 10 bits of resolution,” Phys. Rev. A 75(6), 062325 (2007).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.75.062325 Google Scholar

106. I. Rechet al., “Optical crosstalk in single photon avalanche diode arrays: a new complete model,” Opt. Express 16(12), 8381–8394 (2008).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.16.008381 Google Scholar

107. F. Guerrieriet al., “Two-dimensional SPAD imaging camera for photon counting,” IEEE Photon. J. 2(5), 759–774 (2010).1943-0655 http://dx.doi.org/10.1109/JPHOT.2010.2066554 Google Scholar

108. F. Villaet al., “SPAD smart pixel for time-of-flight and time-correlated single-photon counting measurements,” IEEE Photon. J. 4(3), 795–804 (2012).1943-0655 http://dx.doi.org/10.1109/JPHOT.2012.2198459 Google Scholar

109. S. Takeuchiet al., “Development of a high-quantum-efficiency single-photon counting system,” Appl. Phys. Lett. 74(8), 1063–1065 (1999).APPLAB0003-6951 http://dx.doi.org/10.1063/1.123482 Google Scholar

110. J. Kimet al., “Multiphoton detection using visible light counter,” Appl. Phys. Lett. 74(7), 902–904 (1999).APPLAB0003-6951 http://dx.doi.org/10.1063/1.123404 Google Scholar

111. E. Wakset al., “High-efficiency photon-number detection for quantum information processing,” IEEE J. Sel. Topics Quantum Electron. 9(6), 1502–1511 (2003).IJSQEN1077-260X http://dx.doi.org/10.1109/JSTQE.2003.820917 Google Scholar

112. B. Cabreraet al., “Detection of single infrared, optical, and ultraviolet photons using superconducting transition edge sensors,” Appl. Phys. Lett. 73(6), 735–737 (1998).APPLAB0003-6951 http://dx.doi.org/10.1063/1.121984 Google Scholar

113. A. E. LitaA. J. MillerS. W. Nam, “Counting near-infrared single-photons with 95% efficiency,” Opt. Express 16(5), 3032–3040 (2008).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.16.003032 Google Scholar

114. D. Fukudaet al., “Titanium-based transition-edge photon number resolving detector with 98% detection efficiency with index-matched small-gap fiber coupling,” Opt. Express 19(2), 870–875 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.000870 Google Scholar

115. D. Fukudaet al., “Titanium TES based photon number resolving detectors with 1 MHz counting rate and 65% quantum efficiency,” Proc. SPIE 7236, 72360C (2009).PSISDG0277-786X http://dx.doi.org/10.1117/12.808851 Google Scholar

116. L. Lolliet al., “Characterization of optical fast transition-edge sensors with optimized fiber coupling,” IEEE Trans. Appl. Supercond. 23(3), 2100904 (2013).ITASE91051-8223 http://dx.doi.org/10.1109/TASC.2013.2238981 Google Scholar

117. V. Scaraniet al., “The security of practical quantum key distribution,” Rev. Mod. Phys. 81(3), 1301–1350 (2009).RMPHAT0034-6861 http://dx.doi.org/10.1103/RevModPhys.81.1301 Google Scholar

118. M. Sasakiet al., “Field test of quantum key distribution in the Tokyo QKD network,” Opt. Express 19(11), 10387–10409 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.010387 Google Scholar

119. P. D. TownsendJ. G. RarityP. R. Tapster, “Single photon interference in 10 km long optical fibre interferometer,” Electron. Lett. 29(7), 634–635 (1993).ELLEAK0013-5194 http://dx.doi.org/10.1049/el:19930424 Google Scholar

120. G. Brassardet al., “Limitations on practical quantum cryptography,” Phys. Rev. Lett. 85(6), 1330–1333 (2000).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.85.1330 Google Scholar

121. V. Scaraniet al., “Quantum cryptography protocols robust against photon number splitting attacks for weak laser pulse implementations,” Phys. Rev. Lett. 92(5), 057901 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.92.057901 Google Scholar

122. H.-K. LoX. MaK. Chen, “Decoy state quantum key distribution,” Phys. Rev. Lett. 94(23), 230504 (2005).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.94.230504 Google Scholar

123. D. Gottesmanet al., “Security of quantum key distribution with imperfect devices,” Quantum Inf. Comput. 4(5), 325–360 (2004).QICUAW1533-7146 Google Scholar

124. M. Lucamariniet al., “Efficient decoy-state quantum key distribution with quantified security,” Opt. Express 21(21), 24550–24565 (2013).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.21.024550 Google Scholar

125. C. Kurtsieferet al., “The breakdown flash of silicon avalanche photodiodes—back door for eavesdropper attacks?,” J. Mod. Opt. 48(13), 2039–2047 (2001).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340108240905 Google Scholar

126. A. Lamas-LinaresC. Kurtsiefer, “Breaking a quantum key distribution system through a timing side channel,” Opt. Express 15(15), 9388–9393 (2007).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.15.009388 Google Scholar

127. H.-W. Liet al., “Attacking a practical quantum-key-distribution system with wavelength-dependent beam-splitter and multiwavelength sources,” Phys. Rev. A 84(6), 062308 (2011).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.84.062308 Google Scholar

128. H. Weieret al., “Quantum eavesdropping without interception: an attack exploiting the dead time of single-photon detectors,” New J. Phys. 13(7), 073024 (2011).NJOPFM1367-2630 http://dx.doi.org/10.1088/1367-2630/13/7/073024 Google Scholar

129. Z. L. YuanJ. F. DynesA. J. Shields, “Resilience of gated avalanche photodiodes against bright illumination attacks in quantum cryptography,” Appl. Phys. Lett. 98(23), 231104 (2011).APPLAB0003-6951 http://dx.doi.org/10.1063/1.3597221 Google Scholar

130. D. Stuckiet al., “Towards a high-speed quantum random number generator,” Proc. SPIE 8899, 88990R (2013).PSISDG0277-786X http://dx.doi.org/10.1117/12.2029287 Google Scholar

131. P. GrangierG. RogerA. Aspect, “Experimental evidence for a photon anticorrelation effect on a beam splitter: a new light on single-photon interferences,” Europhys. Lett. 1(4), 173–179 (1986).EULEEJ0295-5075 http://dx.doi.org/10.1209/0295-5075/1/4/004 Google Scholar

132. L. MandelE. Wolf, Optical Coherence and Quantum Optics, Cambridge University Press, New York (1995). Google Scholar

133. G. Bridaet al., “Experimental realization of a low-noise heralded single-photon source,” Opt. Express 19(2), 1484–1492 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.001484 Google Scholar

134. E. B. Flagget al., “Dynamics of nonclassical light from a single solid-state quantum emitter,” Phys. Rev. Lett. 109(16), 163601 (2012).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.109.163601 Google Scholar

135. F. Jelezkoet al., “Coherence length of photons from a single quantum system,” Phys. Rev. A 67(4), 041802(R) (2003).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.67.041802 Google Scholar

136. R. H. Hadfieldet al., “Single photon source characterization with a superconducting single photon detector,” Opt. Express 13(26), 10846–10853 (2005).OPEXFF1094-4087 http://dx.doi.org/10.1364/OPEX.13.010846 Google Scholar

137. T. FearnR. Loudon, “Theory of two-photon interference,” J. Opt. Soc. Am. B 6(5), 917–927 (1989).JOBPDE0740-3224 http://dx.doi.org/10.1364/JOSAB.6.000917 Google Scholar

138. C. K. HongZ. Y. OuL. Mandel, “Measurement of subpicosecond time intervals between two photons by interference,” Phys. Rev. Lett. 59(18), 2044–2046 (1987).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.59.2044 Google Scholar

139. Y.-H. Kim, “Measurement of one-photon and two-photon wave packets in spontaneous parametric downconversion,” J. Opt. Soc. Am. B 20(9), 1959–1966 (2003).JOBPDE0740-3224 http://dx.doi.org/10.1364/JOSAB.20.001959 Google Scholar

140. P. J. Thomaset al., “Measurement of photon indistinguishability to a quantifiable uncertainty using a Hong–Ou–Mandel interferometer,” Appl. Opt. 49(11), 2173–2182 (2010).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.49.002173 Google Scholar

141. C. R. Fitzpatricket al., Manuscript in Preparation. Google Scholar

142. M. G. A. ParisJ. Řeháček, Eds., Quantum State Estimation, Springer, Berlin (2004). Google Scholar

143. A. I. LvovskyM. G. Raymer, “Continuous-variable optical quantum-state tomography,” Rev. Mod. Phys. 81(1), 299–332 (2009).RMPHAT0034-6861 http://dx.doi.org/10.1103/RevModPhys.81.299 Google Scholar

144. G. M. D'ArianoM. G. A. Paris, “Adaptive quantum homodyne tomography,” Phys. Rev. A 60(1), 518–528 (1999).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.60.518 Google Scholar

145. K. Banaszeket al., “Maximum-likelihood estimation of the density matrix,” Phys. Rev. A 61(1), 010304(R) (2000).PLRAAN1050-2947 Google Scholar

146. A. I. Lvovsky, “Iterative maximum-likelihood reconstruction in quantum homodyne tomography,” J. Opt. B: Quantum Semiclass. Opt. 6(6), S556–S559 (2004).JOBOFD1464-4266 http://dx.doi.org/10.1088/1464-4266/6/6/014 Google Scholar

147. J. ŘeháčekZ. HradilM. Ježek, “Iterative algorithm for reconstruction of entangled states,” Phys. Rev. A 63(4), 040303 (2001).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.63.040303 Google Scholar

148. D. Grosset al., “Quantum state tomography via compressed sensing,” Phys. Rev. Lett. 105(15), 150401 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.105.150401 Google Scholar

149. D. F. V. Jameset al., “Measurement of qubits,” Phys. Rev. A 64(5), 052312 (2001).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.64.052312 Google Scholar

150. A. Linget al., “Experimental polarization state tomography using optimal polarimeters,” Phys. Rev. A 74(2), 022309 (2006).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.74.022309 Google Scholar

151. B. P. Lanyonet al., “Manipulating biphotonic qutrits,” Phys. Rev. Lett. 100(6), 060504 (2008).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.100.060504 Google Scholar

152. G. Bridaet al., “Experimental estimation of entanglement at the quantum limit,” Phys. Rev. Lett. 104(10), 100501 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.104.100501 Google Scholar

153. Y. I. Bogdanovet al., “Statistical estimation of the efficiency of quantum state tomography protocols,” Phys. Rev. Lett. 105(1), 010404 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.105.010404 Google Scholar

154. N. K. Langfordet al., “Measuring entangled qutrits and their use for quantum bit commitment,” Phys. Rev. Lett. 93(5), 053601 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.93.053601 Google Scholar

155. A. V. G. Molina-Terrizaet al., “Triggered qutrits for quantum communication protocols,” Phys. Rev. Lett. 92(16), 167903 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.92.167903 Google Scholar

156. A. J. Milleret al., “Demonstration of a low-noise near-infrared photon counter with multiphoton discrimination,” Appl. Phys. Lett. 83(4), 791–793 (2003).APPLAB0003-6951 http://dx.doi.org/10.1063/1.1596723 Google Scholar

157. G. Di Giuseppeet al., “Direct observation of photon pairs at a single output port of a beam-splitter interferometer,” Phys. Rev. A 68(6), 063817 (2003).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.68.063817 Google Scholar

158. Y. Zhaiet al., “Photon-number-resolved detection of photon-subtracted thermal light,” Opt. Lett. 38(13), 2171–2173 (2013).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.38.002171 Google Scholar

159. E. A. Goldschmidtet al., “Mode reconstruction of a light field by multiphoton statistics,” Phys. Rev. A 88(1), 013822 (2013).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.88.013822 Google Scholar

160. G. Zambraet al., “Experimental reconstruction of photon statistics without photon counting,” Phys. Rev. Lett. 95(6), 063602 (2005).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.95.063602 Google Scholar

161. G. Bridaet al., “Joint multipartite photon statistics by on/off detection,” Opt. Lett. 31(23), 3508–3510 (2006).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.31.003508 Google Scholar

162. A. Alleviet al., “State reconstruction by on/off measurements,” Phys. Rev. A 80(2), 022114 (2009).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.80.022114 Google Scholar

163. I. L. ChuangM. A. Nielsen, “Prescription for experimental determination of the dynamics of a quantum black box,” J. Mod. Opt. 44(11–12), 2455–2467 (1997).JMOPEW0950-0340 Google Scholar

164. T. J. QuinnJ. E. Martin, “A radiometric determination of the Stefan-Boltzmann constant and thermodynamic temperatures between 40C and +100C,” Phil. Trans. R. Soc. Lond. A 316(1536), 85–189 (1985).PTRMAD1364-503X http://dx.doi.org/10.1098/rsta.1985.0058 Google Scholar

165. N. P. FoxJ. P. Rice, “Absolute radiometers,” in Experimental Methods in the Physical Sciences, Volume 41, Optical Radiometry, A. C. ParrR. U. DatlaJ. L. Gardner, Eds., pp. 35–96, Elsevier Academic Press, Amsterdam (2005). Google Scholar

166. N. A. TomlinJ. H. LehmanS. Nam, “Towards a fiber-coupled picowatt cryogenic radiometer,” Opt. Lett. 37(12), 2346–2348 (2012).OPLEDP0146-9592 http://dx.doi.org/10.1364/OL.37.002346 Google Scholar

167. S. D. Billeret al., “Measurements of photomultiplier single photon counting efficiency for the Sudbury Neutrino Observatory,” Nucl. Instrum. Methods Phys. Res. A 432(2–3), 364–373 (1999).NIMAER0168-9002 http://dx.doi.org/10.1016/S0168-9002(99)00500-8 Google Scholar

168. G. EppeldauerJ. E. Hardis, “Fourteen-decade photocurrent measurements with large area silicon photodiodes at room temperature,” Appl. Opt. 30(22), 3091–3099 (1991).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.30.003091 Google Scholar

169. J. Mountfordet al., “Development of a switched integrator amplifier for high-accuracy optical measurements,” Appl. Opt. 47(31), 5821–5828 (2008).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.47.005821 Google Scholar

170. G. Porrovecchioet al., “Sub picowatt absolute light radiation measurement technique with a trap detector and switched integrator amplifier,” Manuscript in Preparation.APOPAI0003-6935 Google Scholar

171. J. Schwinger, “On the classical radiation of accelerated electrons,” Phys. Rev. 75(12), 1912–1925 (1949).PHRVAO0031-899X http://dx.doi.org/10.1103/PhysRev.75.1912 Google Scholar

172. R. Kleinet al., “The metrology light source operated as a primary standard,” Metrologia 46(4), S266–S271 (2009).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/46/4/S25 Google Scholar

173. R. KleinR. ThornagelG. Ulm, “From single photons to milliwatt radiant power—electron storage rings as radiation sources with a high dynamic range,” Metrologia 47(5), R33–R40 (2010).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/47/5/R02 Google Scholar

174. I. Mülleret al., “Traceable calibration of Si avalanche photodiodes using synchrotron radiation,” Metrologia 49(2), S152–S155 (2012).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/49/2/S152 Google Scholar

175. I. MüllerR. M. KleinL. Werner, “Traceable calibration of a fiber-coupled superconducting nano-wire single photon detector using characterized synchrotron radiation,” Manuscript in preparation for NEWRAD 2014 special issue of Metrologia. Google Scholar

176. M. Sildojaet al., “Predictable quantum efficient detector: I. Photodiodes and predicted responsivity,” Metrologia 50(4), 385–394 (2013).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/50/4/385 Google Scholar

177. I. Mülleret al., “Predictable quantum efficient detector: II. Characterization and confirmed responsivity,” Metrologia 50(4), 395–401 (2013).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/50/4/395 Google Scholar

178. M. L. Rastello, “Newstar,”  http://www.inrim.it/Newstar/index.html (24 February 2014). Google Scholar

179. B. Sanguinettiet al., “Quantum cloning for absolute radiometry,” Phys. Rev. Lett. 105(8), 080503 (2010).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.105.080503 Google Scholar

180. B. Sanguinettiet al., “Measuring absolute spectral radiance using an erbium-doped fiber amplifier,” Phys. Rev. A 86(6), 062110 (2012).PLRAAN1050-2947 http://dx.doi.org/10.1103/PhysRevA.86.062110 Google Scholar

181. D. N. Klyshko, “Utilization of vacuum fluctuations as an optical brightness standard,” Sov. J. Quantum Electron. 7(5), 591–595 (1977).SJQEAF0049-1748 http://dx.doi.org/10.1070/QE1977v007n05ABEH012567 Google Scholar

182. G. K. Kitaevaet al., “Measurement of brightness of light fluxes using vacuum fluctuations as a reference,” Sov. Phys. Dokl. 24(7), 564–566 (1979).SPHDA90038-5689 Google Scholar

183. A. L. Migdallet al., “Measuring absolute infrared spectral radiance with correlated visible photons: technique verification and measurement uncertainty,” Appl. Opt. 37(16), 3455–3463 (1998).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.37.003455 Google Scholar

184. A. L. Migdallet al., “Tests of an omnipresent standard for absolute spectral radiance measurements,” Anal. Chim. Acta 380(2–3), 311–316 (1999).ACACAM0003-2670 http://dx.doi.org/10.1016/S0003-2670(98)00685-0 Google Scholar

185. H. B. Coldenstrodt-RongeC. Silberhorn, “Avalanche photo-detection for high data rate applications,” J. Phys. B: At. Mol. Opt. Phys. 40(19), 3909 (2007).JPAPEH0953-4075 http://dx.doi.org/10.1088/0953-4075/40/19/010 Google Scholar

186. W. Schmunket al., “Radiometric calibration of single photon detectors by a single photon source based on NV-centers in diamond,” J. Mod. Opt. 58(14), 1252–1259 (2011).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340.2011.601327 Google Scholar

187. J. G. RarityK. D. RidleyP. R. Tapster, “Absolute measurement of detector quantum efficiency using parametric downconversion,” Appl. Opt. 26(21), 4616–4619 (1987).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.26.004616 Google Scholar

188. A. N. PeninA. V. Sergienko, “Absolute standardless calibration of photo detectors based on quantum two-photon fields,” Appl. Opt. 30(25), 3582–3588 (1991).APOPAI0003-6935 http://dx.doi.org/10.1364/AO.30.003582 Google Scholar

189. G. Bridaet al., “Quantum efficiency and dead time of single-photon counting photodiodes: a comparison between two measurement techniques,” Metrologia 37(5), 625–628 (2000).MTRGAU0026-1394 http://dx.doi.org/10.1088/0026-1394/37/5/64 Google Scholar

190. S. V. PolyakovA. L. Migdall, “High accuracy verification of a correlated photon-based method for determining photon-counting detection efficiency,” Opt. Express 15(4), 1390–1407 (2007).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.15.001390 Google Scholar

191. J. Y. Cheunget al., “Low optical power reference detector implemented in the validation of two-independent techniques for calibrating photon-counting detectors,” Opt. Express 19(21), 20347–20363 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.020347 Google Scholar

192. A. Avellaet al., “Self consistent, absolute calibration technique for photon number resolving detectors,” Opt. Express 19(23), 23249–23257 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.023249 Google Scholar

193. A. P. Worsleyet al., “Absolute efficiency estimation of photon-number-resolving detectors using twin beams,” Opt. Express 17(6), 4397–4411 (2009).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.17.004397 Google Scholar

194. M. A. ItzlerX. JiangM. Entwistle, “Power law temporal dependence of InGaAs/InP SPAD afterpulsing,” J. Mod. Opt. 59(17), 1472–1480 (2012).JMOPEW0950-0340 http://dx.doi.org/10.1080/09500340.2012.698659 Google Scholar

195. S. CovaA. LacaitaG. Ripamonti, “Trapping phenomena in avalanche photodiodes on nanosecond scale,” IEEE Electron. Device Lett. 12(12), 685–687 (1991).EDLEDZ0741-3106 http://dx.doi.org/10.1109/55.116955 Google Scholar

196. A. R. Dixonet al., “Ultrashort dead time of photon-counting InGaAs avalanche photodiodes,” Appl. Phys. Lett. 94(23), 231113 (2009).APPLAB0003-6951 http://dx.doi.org/10.1063/1.3151864 Google Scholar

197. J. Zhanget al., “Response time characterization of NbN superconducting single-photon detectors,” IEEE Trans. Appl. Supercond. 13(2), 180–183 (2003).ITASE91051-8223 http://dx.doi.org/10.1109/TASC.2003.813675 Google Scholar

198. A. J. Kermanet al., “Kinetic-inductance-limited reset time of superconducting nanowire photon counters,” Appl. Phys. Lett. 88(11), 111116 (2006).APPLAB0003-6951 http://dx.doi.org/10.1063/1.2183810 Google Scholar

199. J. S. Lundeenet al., “Tomography of quantum detectors,” Nat. Phys. 5(1), 27 (2009).NPAHAX1745-2473 http://dx.doi.org/10.1038/nphys1133 Google Scholar

200. M. K. AkhlaghiA. H. MajediJ. S. Lundeen, “Nonlinearity in single photon detection: modeling and quantum tomography,” Opt. Express 19(22), 21305 (2011).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.19.021305 Google Scholar

201. G. Bridaet al., “Quantum characterization of superconducting photon counters,” New J. Phys. 14(8), 085001 (2012).NJOPFM1367-2630 http://dx.doi.org/10.1088/1367-2630/14/8/085001 Google Scholar

202. C. M. Natarajanet al., “Quantum detector tomography of a time-multiplexed superconducting nanowire single-photon detector at telecom wavelengths,” Opt. Express 21(1), 893 (2013).OPEXFF1094-4087 http://dx.doi.org/10.1364/OE.21.000893 Google Scholar

203. G. M. D'ArianoL. MacconeP. L. Presti, “Quantum calibration of measurement instrumentation,” Phys. Rev. Lett. 93(25), 250407 (2004).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.93.250407 Google Scholar

204. G. Bridaet al., “Ancilla-assisted calibration of a measuring apparatus,” Phys. Rev. Lett. 108(25), 253601 (2012).PRLTAO0031-9007 http://dx.doi.org/10.1103/PhysRevLett.108.253601 Google Scholar

205. European Telecommunications Standards Institute, “Quantum Key Distribution,”  http://www.etsi.org/technologies-clusters/technologies/quantum-key-distribution (24 February 2014). Google Scholar


Christopher J. Chunnilall is a senior scientist in the Quantum Detection group at the National Physical Laboratory (NPL), United Kingdom. He received his BSc and PhD degrees from Durham University and King’s College London, respectively, and is the author of more than 40 peer-reviewed and conference proceeding papers. His current research addresses the measurement needs for quantum optical technologies, such as quantum key distribution, and the application of single and entangled photons to metrology.

Ivo Pietro Degiovanni is a permanent researcher in the Optics Department at the Istituto Nazionale di Ricerca Metrologica, Italy. He received his PhD from the Polytechnic of Turin and has coauthored more than 60 peer-reviewed papers. His main research interests are in quantum radiometry, quantum enhanced measurements, quantum information (in particular QKD), and the foundations of quantum mechanics. He serves on the scientific committee of the “Single-Photon Workshop” conference series.

Stefan Kück is the head of the Photometry and Applied Radiometry Department at the Physikalisch-Technische Bundesanstalt (PTB), Germany, and a professor at the Technical University of Braunschweig. He received his diploma and doctoral degree from the University of Hamburg and is the author of 5 book articles and more than 110 journal articles and conference proceeding papers. His current research addresses the metrology for single-photon emitters and detectors, and the investigation toward single-photon standard sources.

Ingmar Müller is a postdoctoral researcher in the Detector Radiometry group at the PTB in Berlin. He received his physics diploma and his doctoral degree from the Humboldt-Universität zu Berlin. He is the author of more than 15 publications in international journals and conference proceedings. His current research interests include absolute radiometry, detectors with predictable quantum efficiency, and traceability for quantum radiometry.

Alastair G. Sinclair is a principal scientist in the Quantum Detection group at NPL, United Kingdom. He received his BSc and PhD degrees from the University of Strathclyde, Scotland, and then carried out research on the quantum statistics of ultracold atoms as a postdoctoral research fellow at Stanford University. Since then he has been at NPL, where he carries out research into trapped ions and single photons for quantum metrology.

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.
Christopher J. Chunnilall, Christopher J. Chunnilall, Ivo Pietro Degiovanni, Ivo Pietro Degiovanni, Stefan Kück, Stefan Kück, Ingmar Müller, Ingmar Müller, Alastair G. Sinclair, Alastair G. Sinclair, } "Metrology of single-photon sources and detectors: a review," Optical Engineering 53(8), 081910 (10 July 2014). https://doi.org/10.1117/1.OE.53.8.081910 . Submission:

Back to Top