25 April 2016 Real-time through-the-wall radar imaging under unknown wall characteristics using the least-squares support vector machines based method
Hua-Mei Zhang, Zheng-Bin Wang, Zhi-Hang Wu, Fang-Fang Wang, Ye-Rong Zhang
Author Affiliations +
Abstract
To solve the real-time through-the-wall imaging problem in the presence of wall ambiguities, an approach based on the least-squares support vector machines (LS-SVMs) is proposed. This technique converts the through-the-wall problem into the establishment and use of a mapping between the backscattered data and the target properties. The wall parameters and the propagation effects caused by the walls are both included in the mapping and can be regressed after the LS-SVM training process. The target properties are estimated using LS-SVM. Noiseless and noisy measurements are performed to demonstrate that the approach can provide comparable performance in terms of robustness and efficacy, as well as improved performance in terms of accuracy and convenience, in comparison with the approach based on the support vector machine (SVM). The influence of the radius of the target on the estimation problem is discussed, and the estimated results show that both the LS-SVM and the SVM have good performances in terms of generalization.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 1931-3195/2016/$25.00 © 2016 SPIE
Hua-Mei Zhang, Zheng-Bin Wang, Zhi-Hang Wu, Fang-Fang Wang, and Ye-Rong Zhang "Real-time through-the-wall radar imaging under unknown wall characteristics using the least-squares support vector machines based method," Journal of Applied Remote Sensing 10(2), 020501 (25 April 2016). https://doi.org/10.1117/1.JRS.10.020501
Published: 25 April 2016
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Radar imaging

Detection and tracking algorithms

Finite-difference time-domain method

Signal to noise ratio

Error analysis

Dielectrics

Back to Top