Development of method for active alignment of multiple time delay and integration detectors in the optically butted focal plane assembly of high-resolution spaceborne imaging systems

Arti Sarkar; B. Narasiha Sharma; Manish Saxena; Nitesh Thapa; Anand Kumar; Himanshu K. Dave; Somya S. Sarkar

doi:10.1117/1.JRS.12.034003

7 August 2018 Development of method for active alignment of multiple time delay and integration detectors in the optically butted focal plane assembly of high-resolution spaceborne imaging systems

Arti Sarkar, B. Narasiha Sharma , Manish Saxena, Nitesh Thapa, Anand Kumar, Himanshu K. Dave, Somya S. Sarkar

Author Affiliations +

Journal of Applied Remote Sensing, Vol. 12, Issue 3, 034003 (August 2018). https://doi.org/10.1117/1.JRS.12.034003

Abstract

Time delay and integration (TDI) detectors are preferred image sensors for high-resolution spaceborne imaging systems for cartographic applications as they provide higher sensitivity by integrating charges over multiple TDI stages in push broom mode. Large swath requirements are met using multiple TDI detectors in optical butting configuration in the focal plane assembly (FPA) to form a single image line on the ground. These detectors need to be aligned with subpixel accuracy to avoid motion smear and errors in the image mosaicking process. Alignment of the multiple TDI detectors in the FPA is a challenging task and is accomplished using custom methods and setups. Passive alignment techniques rely on very high-resolution microscopes for achieving desired accuracies. Active method requires TDI detectors to be operated in staring mode, which is architecturally and functionally not supported by TDI detectors. We developed a scheme for operating the TDI detectors in staring mode without any smear effects to aid in the active alignment process. Based on this, we propose an active alignment approach. The proposed approach is highly advantageous as it can be used throughout the imaging system development phase to demonstrate stability of the alignment and also helps in cross validation with the passive alignment. The developed method was test validated on qualification model FPA, and alignment accuracy of the order of 0.4 μm in tilt and 1.2 μm in line shift has been demonstrated, against the requirements of ±1.5 μm. This method has been extensively used in Cartosat-2S series imaging systems and will be very useful for upcoming high-resolution missions of the Indian Space Research Organisation.

Citation Download Citation

Arti Sarkar, B. Narasiha Sharma , Manish Saxena, Nitesh Thapa, Anand Kumar, Himanshu K. Dave, and Somya S. Sarkar "Development of method for active alignment of multiple time delay and integration detectors in the optically butted focal plane assembly of high-resolution spaceborne imaging systems," Journal of Applied Remote Sensing 12(3), 034003 (7 August 2018). https://doi.org/10.1117/1.JRS.12.034003

Received: 13 March 2018; Accepted: 18 July 2018; Published: 7 August 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available