Translator Disclaimer
1 March 2010 Errata: Hardware implementation algorithm and error analysis of high-speed fluorescence lifetime sensing systems using center-of-mass method
Author Affiliations +

This article [J. Biomed. Opt. 15, 017006 (2010)] was originally published online on 16 February 2010 with errors. The following corrections were made on 23 February 2010:

  • 1. In the affiliation for Robert Henderson appearing on page 1, the ‘‘Institute for Micro and Nano System’’ was changed to ‘‘Institute for Integrated Micro and Nano Systems (IMNS)’’ and ‘‘School of Engineering and Electronics’’ was changed to ‘‘School of Engineering.’’

  • 2. In the corresponding author footnote appearing on page 1, ‘‘School of Engineering and Electronics’’ was changed to ‘‘School of Engineering.’’

  • 3. In Ref. 24 appearing on page 10, ‘‘Xlinx, Inc.’’ was changed to ‘‘Xilinx, Inc.’’

In addition, the following correction was made on 2 March 2010: the definition appearing in the second column of page 3 below Eq. (4) appeared as ‘‘where x=exp(−t/τ)” and was changed to “where x=exp(−h/τ).”

All versions of the article have been corrected and the article appears correctly in print.

©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
David U. Li, Bruce R. Rae, Robert K. Henderson, Robin Andrews, and Jochen Arlt "Errata: Hardware implementation algorithm and error analysis of high-speed fluorescence lifetime sensing systems using center-of-mass method," Journal of Biomedical Optics 15(2), 029801 (1 March 2010). https://doi.org/10.1117/1.3428872
Published: 1 March 2010
JOURNAL ERRATUM
1 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top