1 April 2006 Field-of-view tests for a virtual cockpit application
Author Affiliations +
The virtual cockpit application aims to perform ergonomics studies on future aircraft cockpits, directly from digital mock-ups. This is made possible by immersing a user in a digital mock-up with the help of virtual reality devices. The challenge is then to reproduce a realistic and exact visual environment. To do that, some visual criteria have to be determined: the necessary values of visual acuity, temporal resolution, and field of view. Some of them are easy to find, but the field-of-view requirement is far more subjective and complex to evaluate. We present tests which have helped us to determine the necessary and sufficient values of field of view for such an application. We advise then to use a field of view higher than 75 deg, for ergonomic studies and good performances of the users, and up to 133 deg to increase visual comfort. These results will be used for the specification of a head-mounted display for the application.



For years, the production process has tended to decrease the time to market in the aircraft industry. Concurrent engineering gives powerful opportunities for conception and production of aircraft cockpits. It is largely based on digital mock-ups (DMU), as they enable communication between numerous professionals working on the project. A DMU is a numerical version of a product containing all the information relative to it. It is easy to upgrade and to adapt. This enables to follow a product all along its life cycle. A physical mock-up (PMU) is a physical version of a product, containing part of the information relative to it, at a given time, and then does not permit following the product during its life cycle. Design processes based on DMU allow savings of time and money by decreasing the number of PMU. However, it is difficult to take into account human factors within DMU, because human-product interactions are not well taken into consideration in DMU. That is why PMU are often used for human factors studies. A good alternative to PMU are virtual mock-ups (VMU). They are based on DMU and enable immersion and interaction within a virtual representation of the product. Thus, they allow us to evaluate concepts and detect issues linked to the ergonomics or other human factors. They also benefit from advantages similar to the DMU: fast preparation and simple upgrades.

The motive of our work is to give tools, software, and methods to allow the production of VMU.

The virtual cockpit application consists of the immersion of a user in a VMU, based on the DMU of an aircraft cockpit developed by cockpit designers, with the help of virtual reality devices. The user can then see the environment and interact with it.

In order to allow ergonomics studies, the application must give the user the opportunity to perceive and interact with the VMU with sufficient quality. Visual virtual perception is very dependent on several factors. Field of view (FOV) is one of them. The virtual cockpit application would benefit from the knowledge of the necessary FOV as it would help to choose an adapted head-mounted display (HMD) and calculate images of high quality.

This paper deals with the qualification of the field of view in the virtual cockpit application.


Human Field of View in Virtual Environments or Cockpit Applications

The human FOV represents the part of space visible by the eyes. It reaches 200deg horizontally and 135deg vertic ally.1 For one application, the whole FOV is not always necessary. Moreover, it will lead to complex optical developments. Our goal is then to define what is useful for the application, which will help to choose or specify an adapted visualization display that will not degrade perception.

Arthur1 has studied the influence of FOV on user performances during navigation or search tasks in virtual environments. He showed that there is an increase of performances when FOV increases and is lower than 100deg . Related works in real environments with helicopter cockpits2 or virtual environments but with noncockpit tasks3 prove that there is an increase of performances when FOV increases, until it reaches a limit value, depending on the task, between 40 and 80deg . These studies allow us to suggest that a limit value around 80deg horizontally might be sufficient. However, these results are not applicable to our application: the studies of Arthur1 have been conducted in virtual environments different for aircraft cockpits; the work of Kasper 2 have been led on flying tasks in real helicopters; the tests of Schiefele3 were made in virtual cockpits, but for tasks different from visual ergonomics. Therefore, we have developed tests on different participants, in order to determine correctly the limit values to apply to our virtual cockpit application. These tests are based on user performances on specific tasks and on subjective self-assessment by the participants.


Investigation of Limit Values of Field of View in the Virtual Cockpit Application

This experiment has been separated into two tests. The first one has studied the influence of FOV on the user performance (warnings detection). The second one has studied the influence of FOV on participant visual comfort.

Our goal is to investigate the necessary and sufficient values of FOV, linked to the application, user visual comfort, and user performance.

Our hypothesis is as follows. Two limit values of FOV exist and are linked to the user and to the application: a minimum value below which performance and/or visual comfort are too degraded and a maximum value over which there is no increase in either performance or visual comfort for the user. Any FOV between these two values is sufficient to allow the application even if there may be an increase in performance and/or visual comfort between them.

Twenty-one persons participated in the test, but one of them successfully performed only 10% of the trial, thus only 20 data sets were analyzed. They were aged between 21 and 60 (mean 26). Four of them were familiar with cockpits, 10 with virtual reality, none with the application.

We used the following materials: (1) the MoVE of the Institut Image (a CAVE™-like system), which allows us to use the VMU of the virtual cockpit, and FOV from 0to180deg , by using a virtual window oriented in the direction of the head, and outside which the user sees only black; (2) special stereo glasses (made at the Institut Image) allowing a maximum FOV of 180deg horizontally by 60deg vertically; (3) a head tracking system in order to refresh images taking into account the head position and direction; and (4) a remote control, tracked in position and orientation and equipped with buttons and a virtual laser, in order to interact with buttons of the virtual cockpit.

During the test, the participants sat on the virtual pilot seat and were asked to interact with the cockpit by performing two tasks. The first task was to manipulate three buttons (see number 1 on Fig. 1 ) with the remote control to change three values on a flight display (number 2), in order to make them correspond with three asked values displayed on another flight screen (number 3). The second task was to detect visual warning signals on a flight display (number 4) by pressing a specific button of the remote control (the signal is then considered as detected), and to stop them with the remote control on two different possible places (numbers 5 and 6). Each signal lasts 10s and always appears on the flight display (number 4) and randomly between these two places during the application.

Fig. 1

The different elements of interaction during the tests.


These two tasks were advised by cockpit designers and test pilots, in order to immerse the user in the condition of use of the virtual cockpit application. The center of interest then is only the interaction between the participant and the cockpit interface. They require the participant to move the head or the eye, in order to verify or detect information.


Test 1: Does FOV Have an Influence on User Performance (Warning Detection)

Experimental plan and procedure

The test begins with a training phase during which the participant learns to perform the two tasks with a full FOV ( 180deg ). After the training, test 1 begins. Vertical FOV is always 60deg . Horizontal FOV changes randomly between the following values: 120, 100, 75, and 50deg . Each FOV lasts 1.5min . All along the test, users have to perform the two tasks simultaneously, with a higher priority on the second task.

Collected data

For each FOV, the data collected are the number of detected and undetected warnings.

Results and discussion

Figure 2 shows the percentages of detection according to the FOV. For each FOV, we have divided the number of warnings detected by all the participants by the number of warnings sent to all of them.The detection percentage at the end of the training phase ( 180deg of FOV) is 90%. Between 120 and 75deg there is no significant variation. A matrix of t-tests for dependant samples showed that only one paired comparison is significant. Participants were statically less efficient in detection at 50deg compared to 120deg [ t(19)=2.52 , p0.02 ]. No other paired comparisons were significant.

Fig. 2

Percentages and standard errors of warning detection by the participants as a function of the field of view..


Our conclusion is that there is a risk of decrease in user performance in task 2, when FOV reaches values under 75deg . This value is similar to the ones found by other research teams,1, 2, 3 that is, between 40 and 80deg .


Test 2: What Is the Influence of FOV on User Visual Comfort?

This test aims to determine the limit values linked to visual comfort. The user had to determine the two values, but in a first phase, he had to change the FOV, and in a second phase, it changed automatically. The minimum value is defined as the FOV below which it is too annoying to work with over a span of several hours. The user should feel visually comfortable with any FOV higher than this value. Maximum value is defined as the FOV below which he perceives the first reduction of visual comfort or FOV degradation.

Experimental plan and procedure

Vertical FOV is always 60deg during this test. Horizontal FOV can take any value between 0 and 180deg every half degree.

During the first phase, the user has to modify the FOV with the remote control four times: twice he has to increase the FOV from 0 deg; twice he has to decrease it from 180deg . Each time, the user has to determine minimum and maximum value. Before validating any value, the user has to perform tasks 1 and 2 at least once.

During the second phase, the user has to perform tasks 1 and 2 simultaneously. FOV changes automatically from 0to180deg and from 180to0deg two times each, at the speed of 2.5degs . The user has to indicate by voice when he reaches maximum and minimum values every time.

After each phase, the supervisor asks the user if he thinks that he has found his maximum and minimum values. Possible answers are “yes” or “no.”

Collected data

The data collected are the minimum and maximum values of each user at each phase, and the answers to the question.

Results and analysis

For each participant, we have determined the mean values and standard deviation of the estimated limit values. To keep confident with the collected data we used both participants’ self-report of confidence to find their limits values and the variation of their estimations of these values. Users with high standard deviation (greater than 20deg ) and who answered that they did not find the limit value were rejected. We considered that such a result and a “no” to the question reflects an indecision. For the 20 participants considered, the mean values are 61.9deg for the minimum value (standard deviation 12.9 deg) and 123.2deg for the maximum value (standard deviation 15.2 deg), and the mean value of the standard deviation is 10.8deg for the minimum value and 17.9deg for the maximum value.

The users’ means of self-estimation of the limit values for visual comfort follow normal laws (see Fig. 3 ). To verify the assumption of normality for the data’s distribution we run the Kolmogorov-Smirnov test for normality, and the Lilliefors test. The lack of significant differences assesses that they are accurately modeled by a normal distribution.

Fig. 3

Normal laws representing the probabilities of the limit values of field of view.


By choosing for each of these normal laws the value at 75% of probability, we obtain limit values for the minimum (71 deg) and maximum (133 deg) values, which will satisfy 75% of the population. We suggest accepting these two limits as minimum and maximum values.

The minimum value matches the performances value obtained in test 1 (less than 75deg ). It is better to use a horizontal FOV higher than 71deg for the virtual cockpit application, but it is not necessary to go higher than 133deg . Between these two values, performances will not increase, but comfort will.

Note that test 2 is a subjective test as it is based on user self-assessment. This characteristic is voluntary as it has the goal of taking into account human visual comfort. That is why standard errors are varied as everyone feels different within the application. However, the two values are well separated and their distribution on normal laws lets us suggest that they exist and are usable.



We have presented FOV tests in order to determine the necessary and sufficient FOV for a virtual cockpit application, which will be used for ergonomics studies. The results have shown that there are two limit values. The minimum one is 75deg . Under this limit value user performance might be degraded (see test 1), and most of the users find that it is not comfortable enough to perform the tasks of the application for a FOV lower than this value (see test 2). For a FOV higher than 75deg , performance does not increase, but visual comfort does. Most of the users find an enhancement of comfort when FOV increases, for FOV lower than 133deg (see test 2). It seems that there is no enhancement of comfort for higher FOV.

In conclusion, we advise choosing a value of horizontal FOV higher than 75deg and as near as possible to 133deg for a virtual cockpit application for ergonomics studies. Note that these values of FOV are very far from the FOV of good HMD: from 40deg for good HMD, to 120deg for lower quality HMD.

Other investigations can be added to this one in the FOV determination: tests on vertical FOV, and on overlap.

In future works, we will also develop interaction for this application, in order to allow the user to interact in an intuitive and natural way with the VMU.


We would like to thank J.M. Burkhardt (from “Laboratoire d’Ergonomie Informatique”) for his help on the tests, and P. Philibert and A. Le Hyaric for their help in English.


1.  K. W. Arthur, “Effects of field of view on performance with head-mounted displays,” Thesis Dissertation, University of North Carolina at Chapel Hill, Department of Computer Science (2000). Google Scholar

2.  E. F. Kasper, L. A. Haworth, Z. P. Szoboszlay, R. D. King, and Z. L. Halmos, “Effects of inflight view restriction on rotorcraft pilot head movement,” Proc. SPIE 3058, 34–45 (1997). Google Scholar

3.  J. Schiefele, “Realization and evaluation of virtual cockpit simulation and virtual flight simulation,” Thesis Dissertation, University of Technology, Darmstadt (2000). Google Scholar

© (2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Marc Chevaldonne, Marc Chevaldonne, C. Ballaz, C. Ballaz, Frédéric Merienne, Frédéric Merienne, M. Neveu, M. Neveu, Nicolas Chevassus, Nicolas Chevassus, F. Guillaume, F. Guillaume, C. Arbez, C. Arbez, } "Field-of-view tests for a virtual cockpit application," Journal of Electronic Imaging 15(2), 020501 (1 April 2006). https://doi.org/10.1117/1.2189211 . Submission:

Back to Top