Translator Disclaimer
13 October 2015 Exposure time calculation for spectral cameras
Author Affiliations +
This paper presents a method for automatic exposure time adjustment for multispectral and hyperspectral cameras. The method presented here is based upon a spectral power image. Here, we use the photopic response function due to its widespread usage in photography and psychophysics. Note that, however, the method presented here is quite general in nature and can employ a number of spectral sensitivity functions for the computation of the spectral power image. Making use of this spectral power image, the exposure time is then computed via iterative updates so as to minimize the squared error between a target image and the current spectral power yielded by the imager. This target image is recovered in a straightforward manner using histogram equalization and the Commission Internationale de l’Éclairage (CIE) photopic function. This, in turn, yields an automatic method devoid of calibration targets or additional inputs. We perform a stability and controllability analysis of our method using a state-space representation. We also show the applicability of the method for exposure time calculation on staring array and multicharge coupled device architecture cameras on real-world scenes.
© 2015 SPIE and IS&T 1017-9909/2015/$25.00 © 2015 SPIE and IS&T
Ahmed Sohaib and Antonio Robles-Kelly "Exposure time calculation for spectral cameras," Journal of Electronic Imaging 24(5), 053025 (13 October 2015).
Published: 13 October 2015


The streak camera development program at LLE
Proceedings of SPIE (March 17 2005)
Projecting the rate of in field pixel defects based on...
Proceedings of SPIE (February 15 2012)
Measuring the point-spread function of sea ice in situ
Proceedings of SPIE (December 31 1992)
High-accuracy photometry using CCD technology
Proceedings of SPIE (September 26 1995)
Photometric Calibration Of Optical Streak Cameras
Proceedings of SPIE (January 17 1990)

Back to Top