Impact of post-litho linewidth roughness smoothing processes on the post-etch patterning result

Philippe Foubert; Alessandro Vaglio Pret; Efrain Altamirano Sanchez; Roel Gronheid

doi:10.1117/1.3603992

1 July 2011 Impact of post-litho linewidth roughness smoothing processes on the post-etch patterning result

Philippe Foubert, Alessandro Vaglio Pret, Efrain Altamirano Sanchez, Roel Gronheid

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 10, Issue 3, 033001 (July 2011). https://doi.org/10.1117/1.3603992

Abstract

In the last years, interest in reducing linewidth roughness (LWR) in EUV lithography through a dedicated process step has significantly increased. Various post-litho processing techniques to improve LWR without compromising resolution or sensitivity have been proposed. While these techniques are giving smoothing levels up to 30% before etch, the important question is, of course, how efficient they are in the full patterning process. To evaluate the effectiveness of the smoothing techniques on the EUV resist process and the post-etch pattern, a few of the most promising techniques have been selected for evaluation. Post-develop rinse smoothing and solvent vapor smoothing can reduce the LWR by 10% to 15%. Ion-beam smoothing is giving higher smoothing values, but suffers some important limitations for its application. Two case studies of post-litho smoothing followed by a standard etch process reveal that a large portion of the LWR smoothing can remain after etch, but the LWR gain may also be completely lost. Finally, a plasma smoothing process combined with a layer deposition is proposed to optimize the etch process itself. Analysis of LWR in the spatial frequency domain at the different stages of the patterning process gives a better insight into the impact of the different steps.

©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Philippe Foubert, Alessandro Vaglio Pret, Efrain Altamirano Sanchez, and Roel Gronheid "Impact of post-litho linewidth roughness smoothing processes on the post-etch patterning result," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(3), 033001 (1 July 2011). https://doi.org/10.1117/1.3603992

Published: 1 July 2011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available