Rigorous assessment of patterning solution of metal layer in 7 nm technology node

Weimin Gao; Ivan Ciofi; Yves Saad; Philippe Matagne; Michael Bachmann; Werner Gillijns; Kevin Lucas; Wolfgang Demmerle; Thomas Schmöller

doi:10.1117/1.JMM.15.1.013505

19 February 2016 ^{Rigorous assessment of patterning solution of metal layer in 7 nm technology node}

Weimin Gao, Ivan Ciofi, Yves Saad, Philippe Matagne, Michael Bachmann, Werner Gillijns, Kevin Lucas, Wolfgang Demmerle, Thomas Schmöller

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 15, Issue 1, 013505 (February 2016). https://doi.org/10.1117/1.JMM.15.1.013505

Abstract

In a 7 nm node (N7), the logic design requires a critical poly pitch of 42 to 45 nm and a metal 1 (M1) pitch of 28 to 32 nm. Such high-pattern density pushes the 193 immersion lithography solution toward its limit and also brings extremely complex patterning scenarios. The N7 M1 layer may require a self-aligned quadruple patterning (SAQP) with a triple litho-etch (LE³) block process. Therefore, the whole patterning process flow requires multiple exposure+etch+deposition processes and each step introduces a particular impact on the pattern profiles and the topography. In this study, we have successfully integrated a simulation tool that enables emulation of the whole patterning flow with realistic process-dependent three-dimensional (3-D) profile and topology. We use this tool to study the patterning process variations of the N7 M1 layer including the overlay control, the critical dimension uniformity budget, and the lithographic process window (PW). The resulting 3-D pattern structure can be used to optimize the process flow, verify design rules, extract parasitics, and most importantly, simulate the electric field, and identify hot spots for dielectric reliability. As an example application, the maximum electric field at M1 tip-to-tip, which is one of the most critical patterning locations, has been simulated and extracted. The approach helps to investigate the impact of process variations on dielectric reliability. We have also assessed the alternative M1 patterning flow with a single exposure block using extreme ultraviolet lithography (EUVL) and analyzed its advantages compared to the LE³ block approach.

Citation Download Citation

Weimin Gao, Ivan Ciofi, Yves Saad, Philippe Matagne, Michael Bachmann, Werner Gillijns, Kevin Lucas, Wolfgang Demmerle, and Thomas Schmöller "^{Rigorous assessment of patterning solution of metal layer in 7 nm technology node," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(1), 013505 (19 February 2016). https://doi.org/10.1117/1.JMM.15.1.013505}

Published: 19 February 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available