Tip-on-tip imaging and self-consistent calibration using critical dimension atomic force microscopy

Ronald Dixson

doi:10.1117/1.JMM.16.2.024005

30 June 2017 Tip-on-tip imaging and self-consistent calibration using critical dimension atomic force microscopy

Ronald Dixson

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 16, Issue 2, 024005 (June 2017). https://doi.org/10.1117/1.JMM.16.2.024005

Abstract

There are presently two major forms of atomic force microscopy (AFM) which are used for critical dimension (CD) metrology in semiconductor and nano-manufacturing metrology. One type, commonly referred to as CD-AFM, uses flared tips and two-dimensional surface sensing to enable scanning of features with near-vertical sidewalls. A major source of uncertainty in this type of CD-AFM metrology is the calibration uncertainty of the tip width (TW). Standards for traceable TW calibration have thus been developed both by national metrology institutes and by commercial suppliers. This paper describes work on a potential alternative approach using a self-consistency calibration of three CD-AFM tips. Due to the requirement for tip-on-tip imaging and challenges associated with this, the application of such methods in AFM metrology has been relatively limited. Initial results that are in agreement with the prior National Institute of Standards and Technology width calibration were obtained, and comparable levels of uncertainty should be achievable. Although the self-consistent approach is unlikely to supplant transmission electron microscope cross sections and the use of well-characterized standards, it may have value as a supporting method or for validation of a prior result, and it may ultimately be as useful for evaluation of tip shape parameters—such as vertical edge height—as for TW calibration.

Citation Download Citation

Ronald Dixson "Tip-on-tip imaging and self-consistent calibration using critical dimension atomic force microscopy," Journal of Micro/Nanolithography, MEMS, and MOEMS 16(2), 024005 (30 June 2017). https://doi.org/10.1117/1.JMM.16.2.024005

Received: 22 February 2017; Accepted: 9 June 2017; Published: 30 June 2017

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available