1 April 2003 Novel multi-user-MEMS-processes-compatible single-layer out-of-plane electrothermal actuator
Weider Tang, Mingching Wu, Weileun Fang
Author Affiliations +
Abstract
Microactuators are regarded as a key component in the field of microelectromechanical systems (MEMS). According to the motion of the actuator, it can be classified as an out-of-plane type or an in-plane type. Most of the existing out-of-plane thermal actuators are multi-layer structures. In this study, a novel electrothermal single-layer out-of-plane actuator is presented. The characteristics of this device are stated as follows: (1) This actuator consists of only a single thin film layer, therefore, it can prevent delaminating after a long-term operation. (2) The fabrication process is multi-user MEMS processes (MUMPs)-compatible, and it has the potential to integrate with many different micromachined components. (3) As demonstrated by the experiment, this device can be operated at a relatively low voltage. For the thermal actuator with beam length 275 μm, its deflection amplitude can reach 3.196 μm when driven at 5 V dc, and 5.316 μm when driven at 8 V dc. This structure offers the potential for application in adaptive optics systems and other optical systems. It also provides an interface to cooperate with integrated circuits and various optical elements to construct an embedded-control optical system.
©(2003) Society of Photo-Optical Instrumentation Engineers (SPIE)
Weider Tang, Mingching Wu, and Weileun Fang "Novel multi-user-MEMS-processes-compatible single-layer out-of-plane electrothermal actuator," Journal of Micro/Nanolithography, MEMS, and MOEMS 2(2), (1 April 2003). https://doi.org/10.1117/1.1564595
Published: 1 April 2003
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Microelectromechanical systems

Low pressure chemical vapor deposition

Thin films

Finite element methods

Interferometers

Oxides

Back to Top