Laterally actuated multicontact MEMS relay fabricated using MetalMUMPS process: experimental characterization and multiscale contact modeling

Lia V. Almeida; Ramesh Ramadoss; Robert L. Jackson; Koji Ishikawa; Q. Yu

doi:10.1117/1.2744240

1 April 2007 Laterally actuated multicontact MEMS relay fabricated using MetalMUMPS process: experimental characterization and multiscale contact modeling

Lia V. Almeida, Ramesh Ramadoss, Robert L. Jackson, Koji Ishikawa, Q. Yu

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 6, Issue 2, 023009 (April 2007). https://doi.org/10.1117/1.2744240

Abstract

Multicontact MEMS relays laterally actuated using electrostatic comb-drive actuators are reported. The relay consists of a movable main beam anchored to the substrate using two identical folded suspension springs. Multicontact RF ports consist of five movable fingers connected to the movable main beam and six fixed fingers anchored to the substrate. Comb-drive actuators located at the top and bottom ends of the main beam enable bidirectional actuation of the RF contacts. The MEMS relays were fabricated using the MetalMUMPs process, which uses 20-μm-thick electroplated nickel as the structural layer. A 3-μm-thick gold layer was electroplated at the electrical contact surfaces. An example MEMS relay with planar contacts of area 80 μm×20 μm and a spacing of 10 μm between the movable and fixed contacting surfaces is discussed. The overall size of the relay is approximately 3 mm×3 mm. "Resistance versus applied voltage" characteristics of the MEMS relay have been measured for applied DC bias voltages in the range of 172 V to 220 V. A multiscale rough surface contact model was used to estimate the actual electrical contact resistance versus applied force curve of these devices. The multiscale model showed good qualitative agreement with the experimental measurements but requires more refinement to achieve good quantitative agreement.

©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Lia V. Almeida, Ramesh Ramadoss, Robert L. Jackson, Koji Ishikawa, and Q. Yu "Laterally actuated multicontact MEMS relay fabricated using MetalMUMPS process: experimental characterization and multiscale contact modeling," Journal of Micro/Nanolithography, MEMS, and MOEMS 6(2), 023009 (1 April 2007). https://doi.org/10.1117/1.2744240

Published: 1 April 2007

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available