Translator Disclaimer
1 January 2009 Materials modeling and development for use in double-exposure lithography applications
Author Affiliations +
The current optical photolithography technology is approaching the physical barrier to the minimum achievable feature size. To produce smaller devices, new resolution enhancement technologies must be developed. Double-exposure lithography has shown promise as a potential pathway that is attractive because it is much cheaper than double-patterning lithography and can be deployed on existing imaging tools. However, this technology is not possible without the development of new materials with nonlinear response to exposure dose. The performance of existing materials such as reversible contrast enhancement layers (rCELs), and theoretical materials such as intermediate state two-photon (ISTP) and optical threshold layer (OTL) materials in double-exposure applications have been investigated through computer simulation. All three materials yielded process windows in double-exposure mode. OTL materials showed the largest process window (depth of focus (DOF) 0.14 µm, exposure latitude (EL) 5.1%). ISTP materials had the next-largest process window (DOF 0.12 µm, EL 3.2%), followed by the rCEL (0.11 µm, 0.58%). This study is an analysis of the feasibility of using the materials in double-exposure mode.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Saul S. Lee, Kane Jen, C. Grant Willson, Jeffrey D. Byers, Paul A. Zimmerman, and Nicholas J. Turro "Materials modeling and development for use in double-exposure lithography applications," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(1), 011011 (1 January 2009).
Published: 1 January 2009

Back to Top