Step-and-repeat nanoimprint on pre-spin coated film for the fabrication of integrated optical devices

Alexander Koshelev; Giuseppe Calafiore; Alexander Goltsov; Scott D. Dhuey; Simone Sassolini; Vladimir Yankov; Martin Messerschmidt; Arne Schleunitz; Carlos A. Piña-Hernandez; Fabrizio Candido Pirri; Stefano Cabrini; Christophe Peroz

doi:10.1117/1.JMM.14.3.033506

7 August 2015 Step-and-repeat nanoimprint on pre-spin coated film for the fabrication of integrated optical devices

Alexander Koshelev, Giuseppe Calafiore, Alexander Goltsov, Scott D. Dhuey, Simone Sassolini, Vladimir Yankov, Martin Messerschmidt, Arne Schleunitz, Carlos A. Piña-Hernandez, Fabrizio Candido Pirri, Stefano Cabrini, Christophe Peroz

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 14, Issue 3, 033506 (August 2015). https://doi.org/10.1117/1.JMM.14.3.033506

Abstract

A step-and-repeat nanoimprint lithography (SR-NIL) process on a pre-spin-coated film is employed for the fabrication of an integrated optical device for on-chip spectroscopy. The complex device geometry has a footprint of about 3 cm² and comprises several integrated optical components with different pattern size and density. Here, a new resist formulation for SR-NIL was tested for the first time and proved effective at dramatically reducing the occurrence of systematic defects due to film dewetting, trapped bubbles, and resist peel-off. A batch of 180 dies were imprinted, and statistics on the imprint success rate is discussed. Devices were optically characterized and benchmarked to an identical chip that was fabricated by electron-beam lithography. The overall performance of the imprinted nanospectrometers is well-aligned with that of the reference chip, which demonstrates the great potential of our SR-NIL for the low-cost manufacturing of integrated optical devices.

Citation Download Citation

Alexander Koshelev, Giuseppe Calafiore, Alexander Goltsov, Scott D. Dhuey, Simone Sassolini, Vladimir Yankov, Martin Messerschmidt, Arne Schleunitz, Carlos A. Piña-Hernandez, Fabrizio Candido Pirri, Stefano Cabrini, and Christophe Peroz "Step-and-repeat nanoimprint on pre-spin coated film for the fabrication of integrated optical devices," Journal of Micro/Nanolithography, MEMS, and MOEMS 14(3), 033506 (7 August 2015). https://doi.org/10.1117/1.JMM.14.3.033506

Published: 7 August 2015

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available