Challenges in line edge roughness metrology in directed self-assembly lithography: placement errors and cross-line correlations

Vassilios Constantoudis; George Papavieros; Evangelos Gogolides; Alessandro Vaglio Pret; Hari Pathangi; Roel Gronheid

doi:10.1117/1.JMM.16.2.024001

11 April 2017 Challenges in line edge roughness metrology in directed self-assembly lithography: placement errors and cross-line correlations

Vassilios Constantoudis, George Papavieros, Evangelos Gogolides, Alessandro Vaglio Pret, Hari Pathangi, Roel Gronheid

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 16, Issue 2, 024001 (April 2017). https://doi.org/10.1117/1.JMM.16.2.024001

Abstract

Directed self-assembly (DSA) lithography poses challenges in line edge roughness (LER)/line width roughness metrology due to its self-organized and pitch-based nature. To cope with these challenges, a characterization approach with metrics and/or updates of the older ones is required. To this end, we focus on two specific challenges of DSA line patterns: (a) the large correlations between the left and right edges of a line (line wiggling) and (b) the cross-line correlations, i.e., the resemblance of wiggling fluctuations of nearby lines. The first is quantified by the line center roughness whose low-frequency part is related to the local placement errors of device structures. For the second, we introduce the c-factor correlation function, which quantifies the strength of the correlations between lines versus their horizontal distance in pitches. The proposed characterization approach is first illustrated and explained in synthesized scanning electron microscope images with full control of their dimensional and roughness parameters; it is then applied to the analysis of line/space patterns obtained with the Liu–Nealey flow (post-Polymethyl methacrylate removal and pattern transfer), revealing the effects of pattern transfer on roughness and uniformity. Finally, we calculate the c-factor function of various next-generation lithography techniques and show their distinct footprint on the extent of cross-line correlations.

Citation Download Citation

Vassilios Constantoudis, George Papavieros, Evangelos Gogolides, Alessandro Vaglio Pret, Hari Pathangi, and Roel Gronheid "Challenges in line edge roughness metrology in directed self-assembly lithography: placement errors and cross-line correlations," Journal of Micro/Nanolithography, MEMS, and MOEMS 16(2), 024001 (11 April 2017). https://doi.org/10.1117/1.JMM.16.2.024001

Received: 19 August 2016; Accepted: 20 March 2017; Published: 11 April 2017

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available