1 January 2011 Near-field enhancement for infrared sensor applications
Juan Jose Sanz-Fernandez, Carolina Mateo-Segura, Rebecca Cheung, George Goussetis, Marc P. Y. Desmulliez
Author Affiliations +
Abstract
A detailed investigation on planar two dimensional metallodielectric dipole arrays with enhanced near-fields for sensing applications was carried out. Two approaches for enhancing the near-fields and increasing the quality factor were studied. The reactive power stored in the vicinity of the array at resonance increases rapidly with increasing periodicity. Higher quality factors are produced as a result. The excitation of the odd mode in the presence of a perturbation gives rise to a sharp resonance with near-field enhanced by at least an order of magnitude compared to unperturbed arrays. The trade-off between near-field enhancement and thermal losses was also studied, and the effect of supporting dielectric layers on thermal losses and quality factors were examined. Secondary transmissions due to the dielectric alone were found to enhance and reduce cyclically the quality factor as a function of the thickness of the dielectric material. The performance of a perturbed frequency selective surface in sensing nearby materials was investigated. Finally, unperturbed and perturbed arrays working at infrared frequencies were demonstrated experimentally.
© 2011 Society of Photo-Optical Instrumentation Engineers (SPIE) 1934-2608/2011/5(1)/051814/10/$25.00
Juan Jose Sanz-Fernandez, Carolina Mateo-Segura, Rebecca Cheung, George Goussetis, and Marc P. Y. Desmulliez "Near-field enhancement for infrared sensor applications," Journal of Nanophotonics 5(1), 051814 (1 January 2011). https://doi.org/10.1117/1.3604785
Published: 1 January 2011
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Near field

Dielectrics

Infrared sensors

Absorption

Terahertz radiation

Sensing systems

Aluminum

Back to Top