Liquid crystal-enabled tunability of Yagi-Uda antenna resonant properties

Abstract. We demonstrate the application of liquid crystals to modulate the resonance properties of Yagi-Uda metamaterial absorbers. The absorbance and reflectance peak frequencies and amplitudes were found to be adjustable by reorienting the liquid crystal, irrespective of the polarization of the incident light. Notably, the lowest resonant frequencies were observed when the liquid crystal was in the homeotropic orientation, whereas a reorientation toward the y-axis showed a significant frequency increase, up to 1 GHz. Incorporating liquid crystals to the Yagi-Uda antenna arrays can also serve as a method for eliminating undesired modes, not associated with the antenna resonance. This can be achieved by taking advantage of the sensitivity differences of these modes to refractive index components. The results presented in this study highlight the potential of liquid crystals to deliver dynamic manipulation and real-time adaptability of Yagi-Uda antennas.


Introduction
Metamaterials have been at the forefront of recent scientific exploration.][31][32][33] In the realm of microwave absorbers, structures based on meander wire and high lengthdiameter ratio iron nanowires have showcased exemplary absorption performances. 34,35In the terahertz regime, researchers have made significant strides in designing absorbers using materials such as graphene. 30In addition, within the visible spectrum, nanostructured elements have been leveraged to create efficient absorbers, further demonstrating the versatility of these structures. 31,33n particular, Yagi-Uda structures have drawn attention due to their inherent resonance capabilities and directionality, properties that make them effective absorbers for selected wavelengths. 36,37This has allowed for the extension of their application beyond traditional communication systems to fields, such as electromagnetic interference reduction and stealth technology.
In the study by Bilal et al., 38 a multiband Yagi-Uda shaped metamaterial absorber (YUMA) operating in X-and Ku-bands of the microwave spectrum was introduced.Exhibiting three distinct absorption peaks at 10.64, 12.08, and 14.09 GHz, the YUMA has shown polarization controllability and wide incidence angle stability.Mutual coupling between the arms of the Yagi-Uda structure was found to contribute significantly to the multiband absorption mechanism, suggesting potential applications for the YUMA in X-and Ku-band operations.
In this paper, the capabilities of Yagi-Uda metamaterial absorber are augmented by integrating liquid crystals (LCs) into their design.This approach provides the potential for dynamic manipulation of antenna properties, thereby enabling real-time adaptability based on the operational needs.

Configuration of Yagi-Uda Antenna Metamaterial Absorber
We introduce dynamic control and tunability to the Yagi-Uda antenna array by incorporating LCs, extending the design discussed in Ref. 38 The Yagi-Uda antenna array exhibits the following properties as shown in Fig. 1.
The Yagi-Uda antenna array, constructed of pure metallic copper with an electric conductivity (σ) of 5.8 × 10 7 S∕m, is located atop a dielectric slab substrate.The substrate, which also employs a thin 0.035 mm copper film as a ground plane, has a thickness h s of 1.6 mm.The antenna array itself is made up of multiple elements, each with specific dimensions.The length of the antenna L is set at 9 mm, while the five perpendicular conducting arms have lengths of 4 mm (L 1 ), 3.5 mm (L 2 ), 3 mm (L 3 ), 2.5 mm (L 4 ), and 2 mm (L 5 ), respectively.All elements of the antenna array, including the antenna and its arms, have a width W of 0.5 mm.The thickness of the antenna is 0.035 mm.
Above the Yagi-Uda antenna, the space is filled with a semi-infinite high-birefringence LC.The birefringence of LCs can be as high as Δn ≈ 0.8 39,40 and is likely to reach an even higher value of 0.9. 41In order to highlight the potential impact of the LC orientation on the properties of the Yagi-Uda antenna arrays, a LC with an ordinary refractive index n o of 1.7 and an extraordinary index n e of 2.7 was considered.The dielectric material used to separate the copper structures is FR-4.This substrate material has a relative permittivity ε r of 4.3 and a loss tangent tan δ of 0.025.The dimensions of the unit cell span a size P of 12 mm in both the x and y directions.The Floquet periodic boundary conditions for the unit cell are applied in the x and y directions, while an open add space boundary condition is simulated along the z direction using perfectly matched layers.The calculations were performed using the finite element method in COMSOL Multiphysics.
To demonstrate the capability of using LCs to adjust the resonance properties of Yagi-Uda antennas, we conducted a comparison of the absorbance and reflectance spectra of Yagi-Uda antenna arrays under of the xand y-polarized plane waves propagating in the −z direction.We examined three distinct orientations of the LCs: homeotropic (ñjjz) and two planar orientations (ñjjx and ñjjy) where ñ represents the LC director.
The reorientation can be set up using in-plane electrodes or through photo-orientation methods. 42,43Reorientation can also be achieved by employing a magnetic field.It should be noted that boundary conditions can prevent the LC from reorienting at the substrate.However, using a photoalignment layer over the electrodes can allow for complete reorientation. 44Overall, this approach serves as a proof of concept, confirming the feasibility of utilizing LCs for tuning Yagi-Uda antennas.

Absorption and Reflectance for x-Polarized Incident Light
Figure 2 shows the reflectance and absorbance spectra for an x-polarized plane wave of normal incidence.As expected from such antennas, the spectra consist of multiple discrete absorption peaks that correspond to the resonant frequencies of different antenna elements.The effect of reorienting the LC from a homeotropic to a planar state in the x − z plane is manifested as a gradual increase of the width of the absorption peaks, accompanied by a minor increase in the resonant frequency by ∼0.1 GHz.
On the other hand, the reorientation from the homeotropic to the planar state in the y − z plane has a significant impact on the resonance frequencies by shifting them by approx. 1 GHz to the larger frequencies, accompanied by a slight increase in peak widths.As such, altering the ycomponent of the LC director significantly changes the resonant frequency, while balancing x and z components can be utilized for fine-tuning the absorption profiles.
To comprehend the response of the YUMA to the LC reorientation, it is crucial to examine the polarization and spatial distribution of the electric field in the Yagi-Uda structures (Fig. 3).One of the critical features of the YUMA is its ability to convert the polarization of incident light.Although the incident light only exhibits the x-component of the electric field vector, all three components are present near the antenna, with x and y being dominant.This allows the absorbance and reflectance to be dependent on the y and z components of the refractive index, i.e., on the reorientation of the director in the y − z plane.
The analysis of the modes shows that xand y-polarized modes behave quite differently.The x-polarized modes are found along the antenna arms, while the y-polarized modes localize near the tips of the arms.These y-polarized modes define the resonant frequency as they are sensitive to the length of the antenna arms and their polarization makes them responsive to the y-component of the refractive index of the surrounding media, including the LC.The YUMA sensitivity to the y-component of the director, and much less sensitivity to the x and z components, results in a significant shift of the absorbance peaks' frequency for the y-planar orientation.
A separate analysis should be made for the mode around 14 GHz (Fig. 2).The distribution of components of the electric field (Fig. 3, bottom row) reveals that this mode is z-polarized and does not correspond to the antenna-arm-length-related resonance.This mode is associated with the periodicity of the entire structure.The resonance frequency can be roughly estimated by matching the wavelength of a z-polarized plane wave with the width of the cell: E Q -T A R G E T ; t e m p : i n t r a l i n k -; s e c 3 ; 1 1 7 ; 1 7 4 f ¼ c n o P ≈ 14.7 GHz: Since the 14 GHz mode is z-polarized, it is highly sensitive to the reorientation of the LC between planar and homeotropic states.Transitioning between the two planar states has a slight impact on the mode's frequency, while switching to the homeotropic orientation drastically changes the resonant frequency, effectively disabling this resonance peak.Given the significant influence of LC orientation in both the x − z and y − z planes on this mode, and the more gradual Yakovkin and Reshetnyak: Liquid crystal-enabled tunability of Yagi-Uda antenna. . .response of the Yagi-Uda antenna resonances to x − z reorientation, adjusting the LC orientation in the x − z plane can be utilized to manipulate the relative position of these modes.This can be employed to either distance of the antenna from undesired modes or, conversely, to enable a controlled overlap of such modes.When the director orientation transitions toward the y-direction, a significant increase in resonant frequenciesup to 1 GHzis noted.This shift is accompanied by a drastic reduction in the amplitudes of the higher frequency peaks.The 14.3 GHz peak, similar to the x-polarization case, is associated with the width of the unit cell.The behavior of this mode aligns qualitatively with its counterpart in the x-polarization scenario.
Electric field distributions for the three central absorption peaks are presented in Fig. 5.By comparing Figs. 3 and 5, it becomes clear that the change in polarization of the incident wave introduces a different parity to the electric field distribution.For the incident x-polarization (Fig. 3), the x-component of the electric field distribution is symmetric, and the y-component is antisymmetric, relative to the primary antenna axis.Conversely, in the case of y-polarized incident wave (Fig. 5), the x-component of the excited mode is antisymmetric, and the y-component is symmetric relative to the antenna axis.
Furthermore, it is evident that the resonances in the case of x-polarized incident light involve multiple antenna arms simultaneously, while in the case of y-polarized incident wave the modes have a clear one-to-one correspondence between an antenna arm and the peak of the mode field distribution.

Conclusions
We have demonstrated the potential of LC in fine-tuning the resonance properties of Yagi-Uda antenna arrays.In both scenarios of incident light, xand y-polarization (parallel and perpendicular to the antenna symmetry axis), the reorientation of the LC allows for control over the frequency of absorbance and reflectance peaks.The homeotropic orientation of the LC resulted in the lowest resonant frequencies, while the reorientation of the LC director toward the y-direction leads to a substantial increase in the resonant frequencies, by up to 1 GHz.
In addition, it was found that different types of modes had different levels of sensitivity to different refractive index components, allowing for unwanted modes to be shifted away from specific frequency ranges of interest.This study serves as a proof of concept for using LCs to augment and manipulate Yagi-Uda metamaterial absorbers in real-time, granting more control over their resonance properties.

Code, Data, and Materials Availability
Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.

Fig. 3
Fig.3Electric field distributions at frequencies corresponding to absorption peaks for the case of x -polarized incident light with the planar LC orientation along the y axis.

Fig. 2
Fig. 2 (a) Reflectance and (b) absorbance spectra for the case of x -polarized incident plane wave.

Figure 4
Figure4shows the reflectance and absorbance spectra in the context of y-polarized plane wave.The YUMA shows five absorption peaks corresponding to the five arms of the Yagi-Uda structure.In a manner akin to the x-polarization scenario, the transition of the LC from the homeotropic to the planar state in the x − z plane results in a slight escalation in the resonant frequency, accompanied by a redistribution of peak heights.

Fig. 4
Fig. 4 (a) Reflectance and (b) absorbance spectra for the case of y -polarized incident plane wave.

Fig. 5
Fig.5Electric field distributions at frequencies corresponding to absorption peaks for the case of y -polarized incident light and homeotropically aligned LC.