1 June 1982 The Use Of Sandwich Hologram Interferometry For Nondestructive Testing Of Nuclear Reactor Components
J. L. Doty, B. P. Hildebrand
Author Affiliations +
Abstract
Sandwich hologram interferometry was examined for ap-plicability to the nondestructive testing of high pressure nuclear reactor components. A nonnuclear valve was used as a test specimen. While new and unflawed, it was examined and holographically characterized under the stress of pressurization. A flaw was then machined on the inside surface of the valve casing, and the valve was reexamined. This procedure was repeated, deepening the flaw each time, until it was visible as a "chink" in the fringe pattern characteristic of normal valve expansion. From this, a sensitivity limit for interferometric detection of subsurface voids has been established. Cracks were not examined because the difficulty and expense of the simulation techniques did not fit within the scope of this contract.
J. L. Doty and B. P. Hildebrand "The Use Of Sandwich Hologram Interferometry For Nondestructive Testing Of Nuclear Reactor Components," Optical Engineering 21(3), 213542 (1 June 1982). https://doi.org/10.1117/12.7972943
Published: 1 June 1982
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometry

Holograms

Holographic interferometry

Nondestructive evaluation

Fringe analysis

Holography

Back to Top