1 April 1988 Precision Pointing And Tracking Between Satellite-Borne Optical Systems
K. J. Held, J. D. Barry
Author Affiliations +
Abstract
The results of an analysis of the precision pointing and tracking accuracy possible between satellite-borne optical linking systems using measured platform disturbance data are discussed. Measured vibration data from the Landsat satellite were used to generate the power spectral density parameter needed to model the baseframe noise environments for the two-satellite system. Three control subsystem configurations were evaluated: gyro-stabilized, mass-stabilized, and complementary filter. The sources of error included in the analysis were sensor noise from the optical detector, host satellite baseframe vibrational noise, and frictional and bearing noise. The results of the study indicate that a 1 µrad rms pointing and tracking accuracy may be achieved with either the gyro-stabilized or the complementary filter approach.
K. J. Held and J. D. Barry "Precision Pointing And Tracking Between Satellite-Borne Optical Systems," Optical Engineering 27(4), 274325 (1 April 1988). https://doi.org/10.1117/12.7976677
Published: 1 April 1988
Lens.org Logo
CITATIONS
Cited by 33 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Satellites

Optical tracking

Data modeling

Error analysis

Sensors

Earth observing sensors

Electronic filtering

Back to Top