1 May 1991 Comparison of ultrathin W-Si and W-C multilayers for x-ray optics
Bernard Vidal, J. Marfaing
Author Affiliations +
Abstract
New magnetic materials and x-ray mirrors have lead to the preparation of multilayered structures (MLS) with ultrathin periodic layers. However, physical limitations appear for periods below some tens of A. In particular, fabrication tolerances relative to these ultrathin layer thicknesses are critical for the realization of effective MLS. In sputtering, the deposition rate is easily reproducible and can be maintained at a constant and low value for several hours; for this reason we are able to perform a large number (more than 100) of periodic ultrathin layers by this system (3 to 1.5 nm period). High Resolution Transmission Electron Microscopy (HRTEM) and x-ray reflectivity measurements are used to compare interfaces and stacking regularities for different samples with 140 layers. The W/Si MLS present a better quality of interfaces and structures compared to the W/C MLS.
Bernard Vidal and J. Marfaing "Comparison of ultrathin W-Si and W-C multilayers for x-ray optics," Optical Engineering 30(5), (1 May 1991). https://doi.org/10.1117/12.55834
Published: 1 May 1991
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Multilayers

Interfaces

X-rays

Transmission electron microscopy

Sputter deposition

Deposition processes

RELATED CONTENT

Multilayer films for figured x-ray optics
Proceedings of SPIE (December 11 1998)
Multilayer mirrors for XUV Ge laser wavelengths
Proceedings of SPIE (January 01 1992)
W/C Mirror Deposition Optimization
Proceedings of SPIE (July 28 1989)
Ion beam sputter deposition of x ray multilayer optics on...
Proceedings of SPIE (September 11 2006)
Si-based multilayers with high thermal stability
Proceedings of SPIE (November 08 2000)

Back to Top