1 August 1995 Characterization of beam fanning in BaTiO3 under biasing illumination and its application as log processor
Kanwal Kamra, Kehar Singh
Author Affiliations +
Abstract
We have theoretically investigated the dynamic range compression in a 45 deg-cut BaTiO3 crystal. Modified coupled wave equations, which take into account different directions of scattered beams and the angle dependence of the coupling coefficient, are used. The same equations are employed to study the behavior of beam fanning with and without biasing illumination. Logarithmic operation is demonstrated using biasing illumination in the beam fanning geometery. Results indicate that there is a choice concerning the dynamic range of biasing illumination and the input range over which log operation is achieved. An all-optical configuration shows a very small dynamic range over which log operation can be obtained. A hybrid optoelectronic module of such a log processor is shown to have large operating range. Experimental results are presented to demonstrate the feasibility of this concept. Once the given crystal is characterized to give a standard lookup table for logarithmic operation, the results can be applied to 2-D (image) information. A configuration is suggested for such a 2-D processor, which is expected to find applications in joint-transform correlation, analog computation, and logarithmic filtering.
Kanwal Kamra and Kehar Singh "Characterization of beam fanning in BaTiO3 under biasing illumination and its application as log processor," Optical Engineering 34(8), (1 August 1995). https://doi.org/10.1117/12.209461
Published: 1 August 1995
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Ferroelectric materials

Laser crystals

Polarization

Laser scattering

Scattering

Two wave mixing

Back to Top