1 May 1999 Minimum temperature difference perceived--a new approach to assess undersampled thermal imagers
Wolfgang Wittenstein
Author Affiliations +
The minimum temperature difference perceived (MTDP) is a new device figure of merit for assessing undersampled thermal imagers. MTDP is based on the perception of the standard four-bar test pattern, like minimum resolvable temperature difference (MRTD). In undersampled imagers, the test pattern image is increasingly distorted toward higher pattern frequencies due to aliasing. Contrary to MRTD, MTDP takes into account such signal distortions to a certain extent. With MTDP the imager performance can be assessed beyond the Nyquist frequency. The modulation in the distorted four-bar pattern images is studied as a function of pattern frequency and position. We show that for each pattern frequency, an optimum phase position can be found at which the average modulation in the reproduced pattern image has a maximum. This modulation is defined as the average modulation at optimum phase (AMOP). The MTDP is the temperature difference at which four, three or two bars can be resolved by an observer, with the test pattern at the optimum phase position. The MTDP approach is implemented in the TRM3 model. Examples comparing measured and predicted MTDP data for several staring imagers are presented. The validity of MTDP to predict the range performance of undersampled imagers is examined and results are presented.
Wolfgang Wittenstein "Minimum temperature difference perceived--a new approach to assess undersampled thermal imagers," Optical Engineering 38(5), (1 May 1999). https://doi.org/10.1117/1.602265
Published: 1 May 1999
Lens.org Logo
CITATIONS
Cited by 51 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Modulation transfer functions

Minimum resolvable temperature difference

Thermography

Phase shift keying

Modulation

Performance modeling

RELATED CONTENT

TRM3 progress report
Proceedings of SPIE (December 15 2000)
Assessing The Performance Of Thermal Imagers
Proceedings of SPIE (October 11 1988)
Thermal range model TRM3
Proceedings of SPIE (October 26 1998)

Back to Top