1 June 1999 Fourier transform method for automatic processing of moire deflectograms
J. A. Quiroga, Daniel Crespo, Eusebio Bernabeu
Author Affiliations +
In this work, a Fourier transform technique for automatic analysis of moire´ deflectograms is presented. A squared grating is used to multiplex the information of the deflection in two orthogonal directions in one image. This procedure avoids the necessity of rotating the gratings to obtain the complete deflection information. With this method only two fringe patterns, reference and distorted, are needed to determine the complete deflection information. To deal with irregularly shaped processing areas, a Gerchberg extrapolation method is used. The automatic determination of the carrier as well as the size and position of the reconstruction windows permit the complete and automatic measurement of the deflection produced by an ophthalmic lens in two orthogonal directions. Afterwards, the refractive power maps can be obtained. Experimental results obtained with a progressive addition lens are presented and comparison with measurements obtained with a commercial focimeter are shown showing a good agreement.
J. A. Quiroga, Daniel Crespo, and Eusebio Bernabeu "Fourier transform method for automatic processing of moire deflectograms," Optical Engineering 38(6), (1 June 1999). https://doi.org/10.1117/1.602138
Published: 1 June 1999
Lens.org Logo
CITATIONS
Cited by 64 scholarly publications and 13 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fourier transforms

Fringe analysis

Ronchi rulings

Phase shifts

Optical engineering

Phase measurement

Collimation

Back to Top