Design, fabrication, and characterization of antenna-coupled metal-oxide-metal diodes for dual-band detection

Mohamed Ramy Abdel-Rahmen; Brian Monacelli; Arthur Robert Weeks; Guy Zummo; Glenn David Boreman

doi:10.1117/1.1929647

Translator Disclaimer

1 June 2005 Design, fabrication, and characterization of antenna-coupled metal-oxide-metal diodes for dual-band detection

Mohamed Ramy Abdel-Rahmen, Brian Monacelli, Arthur Robert Weeks, Guy Zummo, Glenn David Boreman

Author Affiliations +

Optical Engineering, 44(6), 066401 (2005). https://doi.org/10.1117/1.1929647

Abstract

Two designs for antenna-coupled Ni-NiO-Ni diodes are fabricated and tested for dual-band detection in the millimeter-wave (MMW), 94-GHz, and infrared (IR), 28.3-THz, frequencies. The detector noise, antenna receiving properties, and noise equivalent power (NEP) are measured. The simultaneous dual-band response is verified.

©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Mohamed Ramy Abdel-Rahmen, Brian Monacelli, Arthur Robert Weeks, Guy Zummo, and Glenn David Boreman "Design, fabrication, and characterization of antenna-coupled metal-oxide-metal diodes for dual-band detection," Optical Engineering 44(6), 066401 (1 June 2005). https://doi.org/10.1117/1.1929647

Published: 1 June 2005

ACCESS THE FULL ARTICLE