1 August 2005 Digital phase-shifting shearography for strain measurement by using a rotating platform system
Author Affiliations +
Abstract
A phase-shifting technique for full-field measurement of the strain of an object in electronic speckle-shearing interferometry is presented. The object under study is placed on a rotating platform and illuminated by an expanded laser beam. Its images are recorded at short intervals by a shearing CCD camera and stored directly into a computer. By subtracting the series of images from the first one, fringe patterns that represent the object surface strain can be obtained and shown on a computer monitor if the object is loaded. When the object is given a small angle of rotation, an additional phase will be introduced into the fringe patterns. Theoretical analysis shows that this additional phase is linear. Therefore, the electronic speckle shearing phase-shifting technique can be realized by rotating the test object. The small angle can be obtained exactly by a rotating platform controlled by a computer. The theory of the method and system as well as some experimental results is presented.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Ping Sun "Digital phase-shifting shearography for strain measurement by using a rotating platform system," Optical Engineering 44(8), 085601 (1 August 2005). https://doi.org/10.1117/1.2010127
Published: 1 August 2005
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase shifts

Surface plasmons

Fringe analysis

Shearography

Speckle

Electronics

Interferometry

RELATED CONTENT


Back to Top