1 April 2006 Temperature stability improvement of a multiwavelength Sagnac loop fiber laser using a high-birefringent photonic crystal fiber as a birefringent component
Author Affiliations +
Abstract
We experimentally demonstrate a temperature-stable multiwavelength erbium-doped fiber laser source using a high-birefringent photonic crystal fiber (HiBi-PCF) as the birefringent component of the Sagnac loop filter within the laser cavity. Three different high-birefringence (Hi-Bi) fibers are used in the loop filter to compare the temperature stability of the fiber laser systems: polarization-maintaining erbium-doped fiber (PM-EDF), panda Hi-Bi fiber, and HiBi-PCF. Because of the high birefringence and low temperature sensitivity of the HiBi-PCF, fiber length in the loop is greatly reduced and the temperature stability of the system is dramatically enhanced.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xia Yu, Duan Liu, Hui Dong, SongNian Fu, Xin Yong Dong, M. Tang, Ping Shum, and Nam Quoc Ngo "Temperature stability improvement of a multiwavelength Sagnac loop fiber laser using a high-birefringent photonic crystal fiber as a birefringent component," Optical Engineering 45(4), 044201 (1 April 2006). https://doi.org/10.1117/1.2192513
Published: 1 April 2006
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Birefringence

Optical filters

Photonic crystal fibers

Electronic filtering

Polarization

Linear filtering

Back to Top