1 November 2006 Dispersion compensation of 2-×10-Gb/s, 1000-km long-haul fiber using only chirped fiber Bragg gratings
Author Affiliations +
Abstract
The impact of cascaded CFBGs delay ripple for dispersion compensation has been analyzed. The experimental results show that the overall penalty was proportional either to the number or to the square root of the number of CFBGs employed along the link. The delay ripple of the overall CFBGs fluctuates, and the overall CFBGs reflectivity was not simply additive but was related to the placement of the CFBG and line amplifier gain. For the first time, the experimental results of dispersion compensation for a 2-×10-Gb/s, 1000-km WDM system using self-made CFBGs with less than 1-dB power penalty for each channel have been achieved.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Tigang Ning, Pei Li, Zhongwei Tan, Kai Zheng, Xiaowei Dong, and Shuisheng Jian "Dispersion compensation of 2-×10-Gb/s, 1000-km long-haul fiber using only chirped fiber Bragg gratings," Optical Engineering 45(11), 115006 (1 November 2006). https://doi.org/10.1117/1.2388342
Published: 1 November 2006
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dispersion

Single mode fibers

Reflectivity

Optical amplifiers

Fiber Bragg gratings

Wavelength division multiplexing

Optical engineering

RELATED CONTENT

Gain flattening filter design for EDFA
Proceedings of SPIE (February 18 2004)
4x10 Gb s 400 km WDM system with negative power...
Proceedings of SPIE (August 28 2002)
Dispersion compensation of 2x10 Gb s 1000 km WDM system...
Proceedings of SPIE (August 28 2002)

Back to Top