1 May 2007 Analysis of picosecond-pulse wavelength conversion based on cascaded sum-frequency generation and difference-frequency generation in quasi-phase-matched LiNbO3 waveguides
Yong Wang, Chang-Qing Xu
Author Affiliations +
Abstract
Wavelength conversion based on the cascaded sum-frequency generation and difference-frequency generation (cSFG+DFG) process in quasi-phase-matched (QPM) periodically poled lithium niobate (PPLN) waveguides has the advantage of no pump occupation in the communication band, compared to the traditional cascaded second-harmonic generation (SHG) and DFG process. In cSFG+DFG-based wavelength conversion, two pump waves and a signal wave are required. The input pulse train, as a carrier of information, can be applied to either the signal or one of the two pump waves. Though the converted wave is in the form of pulses, its temporal and spectral characteristics are dependent on the arrangement of the pulsed wave. In this work, we target the wavelength conversion of 40-GHz picosecond pulse trains, and systematically analyze the temporal and spectral characteristics of the pump, signal, converted, and sum-frequency waves during their propagations in PPLN waveguides by using numerical simulation. In particular, pulse shapes, optical spectra, phases and conversion efficiency are compared when the picosecond pulse train is used as the signal and pump waves, respectively.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Yong Wang and Chang-Qing Xu "Analysis of picosecond-pulse wavelength conversion based on cascaded sum-frequency generation and difference-frequency generation in quasi-phase-matched LiNbO3 waveguides," Optical Engineering 46(5), 055003 (1 May 2007). https://doi.org/10.1117/1.2740751
Published: 1 May 2007
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Wave propagation

Picosecond phenomena

Signal processing

Signal attenuation

Optical engineering

Second-harmonic generation

Back to Top