1 September 2007 Heat transfer measurement by a diffractive optical element fringe projection
Dario Ambrosini D.V.M., Domenica Paoletti
Author Affiliations +
Abstract
We present an innovative method for quantitative and/or qualitative flow visualization by fringe projection through a test section with nonuniform refractive index distribution induced by convective heat transfer. Fringes are generated by a diffractive optical element (DOE). Information about the temperature gradient, encoded in the deformed fringe pattern, is demodulated by Fourier transform algorithms. The main advantages of the proposed procedure are flexibility in suiting to different heat transfer phenomena; full digital and automated data processing to provide both qualitative visualizations and quantitative maps of the temperature gradient field; full-field visualization; and low cost compared to interferometric equipment. The main disadvantages are reduced investigation area with low-cost TV cameras; sensitivity (i.e., smallest detectable temperature gradient); and lower accuracy than that of conventional interferometric and Schlieren techniques.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Dario Ambrosini D.V.M. and Domenica Paoletti "Heat transfer measurement by a diffractive optical element fringe projection," Optical Engineering 46(9), 093606 (1 September 2007). https://doi.org/10.1117/1.2779023
Published: 1 September 2007
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffractive optical elements

Visualization

Cameras

Interferometry

Fringe analysis

Refractive index

Fourier transforms

Back to Top