1 April 2007 Iterative design of multiplane holograms: experiments and applications
Author Affiliations +
Abstract
We present an experimental confirmation of optical properties of multiplane holograms designed with our novel iterative method. The method allows encoding many input intensity distributions into a single phase-only hologram. The object planes can be placed at variable distances, and their content is fully customizable. The reconstructed three-dimensional (3D) scenes exhibit high contrast and low noise level in all designed image planes. The results of numerical simulations are compared with those of a reconstruction in an optical setup. Holograms for optical reconstructions were manufactured using two methods: photographic and electron beam lithography (EBL). Experimental results achieved with both methods are compared. We present our research on a new class of iterative holograms, containing up to eleven object planes, designed in close distance to each other. The elements exhibit unusual light focusing possibilities and extraordinary imaging properties, thus introducing a number of possible practical applications, which are discussed.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Michal Makowski, Maciej Sypek, Andrzej Kolodziejczyk, Grzegorz Mikula, and Jaroslaw Suszek "Iterative design of multiplane holograms: experiments and applications," Optical Engineering 46(4), 045802 (1 April 2007). https://doi.org/10.1117/1.2727379
Published: 1 April 2007
Lens.org Logo
CITATIONS
Cited by 35 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

Optical design

Electron beam lithography

Holography

Photography

3D image reconstruction

Numerical simulations

Back to Top