1 December 2008 Polarization imaging for material classification
Author Affiliations +
Abstract
A simple and stable method is proposed for distinguishing dielectric and metal material surfaces from the polarization images captured by a vision system consisting of a linear polarizer and a digital camera. The polarization state is determined by the transmitted light intensity through the polarizer as a function of polarizing orientation. The degree of polarization (DOP) is estimated from the image intensities through the polarizer. The DOP map is quite effective for material classification around specular highlight on an object surface. We prove that the DOP map is convex for a dielectric surface and concave for a metal surface. The problem of material classification is then reduced to a simple judgment of the convexity of the DOP map obtained around the highlight peak. The proposed method is not a pixelwise local method based on thresholding the Fresnel ratio computed at each pixel but an area-based method based on the DOP map in a highlight area. The feasibility of the method is confirmed in experiments under a variety of conditions.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Shoji Tominaga and Akira Kimachi "Polarization imaging for material classification," Optical Engineering 47(12), 123201 (1 December 2008). https://doi.org/10.1117/1.3041770
Published: 1 December 2008
Lens.org Logo
CITATIONS
Cited by 60 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dielectric polarization

Dielectrics

Metals

Polarizers

Image filtering

Glasses

Reflection

Back to Top