Accurate metrology for laser damage measurements in nonlinear crystals

Anne Hildenbrand; Frank R. Wagner; Hassan Akhouayri; Jean-Yves Natoli; Mireille Commandré

doi:10.1117/1.2963490

1 August 2008 Accurate metrology for laser damage measurements in nonlinear crystals

Anne Hildenbrand, Frank R. Wagner, Hassan Akhouayri, Jean-Yves Natoli, Mireille Commandré

Author Affiliations +

Optical Engineering, Vol. 47, Issue 8, 083603 (August 2008). https://doi.org/10.1117/1.2963490

Abstract

Accurate laser damage measurements are more difficult to perform in nonlinear optical crystals than in glasses due to several effects proper to these materials or greatly enhanced in these materials. Before discussing these effects, we address the topic of error bar determination for probability measurements. Error bars for the measured damage probabilities are especially important when testing small and expensive samples like nonlinear crystals, where only few sites are used for each measurement. The mathematical basics for the numerical calculation of probability error bars corresponding to a chosen confidence level are presented. Effects that possibly modify the maximum light intensity obtained by focusing into a biaxial nonlinear crystal are mainly the focusing aberrations and self-focusing. Depending on focusing conditions, position of the focal point in the crystal, beam propagation direction, and polarization, strong aberrations may change the beam profile and drastically decrease the maximum intensity in the crystal. A correction factor based on former theoretical work is proposed for this effect. The characteristics of self-focusing are quickly reviewed for the sake of completeness, and a note on parasitic second harmonic generation is added at the end.

©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Anne Hildenbrand, Frank R. Wagner, Hassan Akhouayri, Jean-Yves Natoli, and Mireille Commandré "Accurate metrology for laser damage measurements in nonlinear crystals," Optical Engineering 47(8), 083603 (1 August 2008). https://doi.org/10.1117/1.2963490

Published: 1 August 2008

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available