1 May 2009 Spectropolarimetric method for optic axis, retardation, and birefringence dispersion measurement
Author Affiliations +
Abstract
A new method and algorithm for measuring optical linear birefringence is proposed. The method allows the measurement of both the principal axis orientation angle and the retardation simultaneously by a three-step measurement. The average absolute error of the retardation of an achromatic quarter-wave plate (QWP) is found to be better than 10-4 parts of the wavelength over the whole spectrum, and its principal axis system orientation is determined with accuracy better than 0.18 deg. In comparison to other methods, the current technique holds several advantages: wavelength independence, low cost, compact setup, ease of alignment, use of a simple algorithm, no polarization reflectance dependence, and possesses high accuracy. The method was applied also to the measurement of an arbitrary retardation of a sapphire plate and to the assessment of the dynamic retardation of a liquid crystal device.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Avner Safrani and Ibrahim S. Abdulhalim II "Spectropolarimetric method for optic axis, retardation, and birefringence dispersion measurement," Optical Engineering 48(5), 053601 (1 May 2009). https://doi.org/10.1117/1.3126628
Published: 1 May 2009
Lens.org Logo
CITATIONS
Cited by 24 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Commercial off the shelf technology

Wave plates

Absorption

Birefringence

Error analysis

Sapphire

Optical engineering

RELATED CONTENT

E-type polarizers and retarders
Proceedings of SPIE (September 25 2002)

Back to Top