1 June 2010 Measurement of moderate wedge angles of optical windows using a wedge shear plate
Y. Pavan Kumar, Sanjib Chatterjee
Author Affiliations +
Abstract
We present what we believe to be a new technique for the measurement of moderate wedge angles of optical wedge plates using a wedge shear plate (WSP). Using the technique, a wedge angle of up to 5 deg can be measured. The WSP, oriented at an angle to the incident collimated beam, produces shear fringes. The shear fringes are parallel-shifted by rotating a test wedge plate (TWP), in its plane, placed at the input beam of the WSP. The fringe shift is due to the variation of the optical path difference between the interfering beams reflected from the front and back surfaces of the WSP, brought about by the change in the angle of incidence on the WSP due to the rotation of the TWP. The maximum number of fringes shifted as the wedge direction of the TWP (initially aligned perpendicular to the wedge direction of the WSP) is rotated by 180 deg is used for the measurement of the wedge angle of the TWP. Results obtained for a 59.0-arcmin wedge plate with a measurement uncertainty of ±4.68 arcsec are presented. The technique is very simple, and the results are not affected by external vibrations.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Y. Pavan Kumar and Sanjib Chatterjee "Measurement of moderate wedge angles of optical windows using a wedge shear plate," Optical Engineering 49(6), 063603 (1 June 2010). https://doi.org/10.1117/1.3454380
Published: 1 June 2010
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Collimation

Interferometers

Optical engineering

Refractive index

CCD cameras

Wavefronts

Glasses

RELATED CONTENT


Back to Top