1 June 2010 Optical performance of Er3+/Yb3+ codoped core-cladding heterogeneous single-mode fiber amplifier
D. L. Wang, W. H. Lei, Edwin Yue-Bun Pun, F. Song, H. Gong, H. Lin
Author Affiliations +
Abstract
A high-concentration Er3+/Yb3+ codoped core-cladding heterogeneous single-mode phosphate fiber amplifier with a similar numerical aperture to the Corning SMF-28 standard single-mode optical fiber is described. Measurements and calculations are given for the device's optical absorption, strong infrared fluorescence, absorption, and emission cross-sections of Er3+, Judd-Ofelt parameters, and spontaneous transition probabilities of Er3+ in the core glasses. The relative gain (the signal enhancement) of a 5.8-cm-long fiber amplifier was measured to be 32.3 dB, and after compensating for both the propagation loss and the absorption loss, a maximum internal gain of 2.6 dB/cm at 1.535 µm was obtained, which reveals an available core-cladding heterogeneous design strategy in developing high-gain amplifier devices.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
D. L. Wang, W. H. Lei, Edwin Yue-Bun Pun, F. Song, H. Gong, and H. Lin "Optical performance of Er3+/Yb3+ codoped core-cladding heterogeneous single-mode fiber amplifier," Optical Engineering 49(6), 065008 (1 June 2010). https://doi.org/10.1117/1.3456620
Published: 1 June 2010
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Erbium

Ytterbium

Fiber amplifiers

Absorption

Cladding

Single mode fibers

RELATED CONTENT

All fiber few mode Er Yb co doped fiber amplifier...
Proceedings of SPIE (November 01 2021)
Experimental and numerical analysis of high power Er Yb co...
Proceedings of SPIE (February 22 2017)
Erbium-doped phosphate fiber amplifiers
Proceedings of SPIE (August 14 2003)

Back to Top