1 May 2011 Novel high-brightness backlight module for autostereoscopic liquid crystal display
Xiangbing Zhu, Qiaoyun Chen, Feng Jiang, Han Wu
Author Affiliations +
Abstract
Currently, the mainstream autostereoscopic displays have a shortcoming: the insufficient brightness. It causes bad influence on the using of autostereoscopic displays. To improve the brightness, a new design method of the backlight module is needed. In this article, one high-brightness light emitting diode (LED) is used, and the light is concentrated to the eyes of observer by using a Fresnel lens and many cylindrical lenses. The brightness is improved significantly. When the user position changes greatly, another LED is lighted up to replace the former. Imitation and experimental results indicate that this method is feasible. Compare with previous backlight modules, this backlight module is brighter and need less electrical energy, and is more suitable for cockpits.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xiangbing Zhu, Qiaoyun Chen, Feng Jiang, and Han Wu "Novel high-brightness backlight module for autostereoscopic liquid crystal display," Optical Engineering 50(5), 054001 (1 May 2011). https://doi.org/10.1117/1.3574070
Published: 1 May 2011
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

LCDs

Eye

Fresnel lenses

Autostereoscopic displays

Light sources

Lens design

RELATED CONTENT


Back to Top