1 September 2011 Analytical method for designing gradient-index fiber probes
Chi Wang, Chen Fang, Zhi Tang, Yingjie Yu, Youxin Mao, Bo Qi
Author Affiliations +
Abstract
An analytical method was investigated to design the gradient-index (GRIN) fiber probe based on characteristic parameters of a Gaussian beam propagating through the probe. First, a typical model of the GRIN fiber probe was presented, consisting of a single mode fiber, a no-core fiber (NCF), and a GRIN fiber lens. Second, a complex beam parameter matrix transformation method was adopted to derive the mathematical expressions of characteristic parameters, such as beam waist location, beam waist radius, and Rayleigh range. Then, MATLAB software was used to analyze the impact of the length of NCF and the length of the GRIN fiber lens on the characteristic parameters. Finally, performance comparison was performed between the calculation results and the experimental data published previously. The calculation results are in agreement with the experimental data and thus validate the presented analytical method for designing GRIN fiber probes. In addition, the characteristic parameters of a Gaussian beam going through the GRIN fiber probe will stay the same when the length of the GRIN fiber lens increases every 1/2 pitch length, which could be used to decrease the fabrication complication of GRIN fiber probes by increasing the length of GRIN fiber lens periodically.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Chi Wang, Chen Fang, Zhi Tang, Yingjie Yu, Youxin Mao, and Bo Qi "Analytical method for designing gradient-index fiber probes," Optical Engineering 50(9), 094202 (1 September 2011). https://doi.org/10.1117/1.3626206
Published: 1 September 2011
Lens.org Logo
CITATIONS
Cited by 19 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
GRIN lenses

Optical coherence tomography

Gaussian beams

Testing and analysis

Single mode fibers

Beam propagation method

Gradient-index optics

RELATED CONTENT


Back to Top