Open Access
13 March 2013 Errata: Segmented vortex telescope and its tolerance to diffraction effects and primary aberrations
Author Affiliations +
Abstract
This article [Opt. Eng.. 52, (8 ), 081605 (2013)] was originally published on 21 February 2013 with Figs. 4 and 5 reversed, although the captions were correct. The corrected figures and captions are reprinted below.

This article [Opt. Eng. 52(8), 081605 (2013)] was originally published on 21 February 2013 with Figs. 4 and 5 reversed, although the captions were correct. The corrected figures and captions are reprinted below.

Fig. 4

Phase and normalized amplitude at the focal plane for an m=3 vortex (top) dissociated into three m=1 vortices (bottom).

OE_52_8_089801_f001.png

Fig. 5

A complete damaged sector breaks the symmetry of the system and causes vortex dissociation for small damaged angles. The top images represent the obscured sectors. Second and third rows show the normalized field amplitude distribution and a cross-section, respectively, for m=0, m=2, and m=4 (bottom) imaged with a damaged sector of ϕ=15deg. The dotted line is the normalized amplitude with a nondamaged pupil, while the solid lines are vertical (black) and horizontal (red) cross-sections of the amplitude with damaged pupils. Notice the dips that correspond to the dissociated vortices.

OE_52_8_089801_f002.png

The paper was corrected online on 6 March 2013.

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.
Juan P. Trevino, Omar Lopez-Cruz, and Sabino Chavez-Cerda "Errata: Segmented vortex telescope and its tolerance to diffraction effects and primary aberrations," Optical Engineering 52(8), 089801 (13 March 2013). https://doi.org/10.1117/1.OE.52.8.089801
Published: 13 March 2013
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Telescopes

Tolerancing

Optical engineering

Solids

RELATED CONTENT

Tolerance issues in solid immersion lens systems
Proceedings of SPIE (January 10 2002)
Design and Performance of the Optical Systems of ISAMS
Proceedings of SPIE (May 01 1986)
Aberrations In High Power Laser Systems
Proceedings of SPIE (December 30 1981)
Kilometer scale primary collector telescopy
Proceedings of SPIE (December 09 2004)
Effects Of Piston And Tilt Errors On The Performance Of...
Proceedings of SPIE (December 30 1981)

Back to Top