You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
12 November 2015Illumination distribution and signal transmission for indoor visible light communication with different light-emitting diode arrays and pre-equality circuits
The purpose of this study was to seek the optimal design for light-emitting diode (LED) arrays and pre-equality circuits in indoor visible lighting illumination combined with communication. The optical and communicational properties of illumination distribution and signal transmission were investigated. These illumination distributions of array sources were derivate and simulated and actually can be used in free-space communication. Simulated results show the total flux size was rectangle<radial<circlearray, and real measurements also showed the total flux was rectangle<radial<circlearray. The simulated and measured results have a similarity of over 98% by normalized cross correlation. In addition, when the distance of the installed lamp from the wall was 1 m, the rectangular array had the best illumination uniformity of 77.24%, and the size of uniformity was the rectangle<radial≈circle array. Finally, the gain and constant-current pre-equality circuits were used in free-space communication with a carrier frequency from 1 KHz to 1 MHz at a distance of 1.8 m. Both the received signal intensity and divergence angle were rectangle<radial<circle array. The constant-current pre-equality circuit could add the divergence angle from ±18.6deg to ±36.68 deg in the rectangle array at a carrier frequency of 1 MHz.
The alert did not successfully save. Please try again later.
Hsi-Chao Chen, Cheng-Jyun Liou, Syuan-Ruei Siao, "Illumination distribution and signal transmission for indoor visible light communication with different light-emitting diode arrays and pre-equality circuits," Opt. Eng. 54(11) 115106 (12 November 2015) https://doi.org/10.1117/1.OE.54.11.115106