7 April 2016 Method of alignment error control in free-form surface metrology with the tilted-wave-interferometer
Author Affiliations +
Abstract
Compared with conventional optical elements, free-form surface optical elements, as a kind of nonrotationally symmetrical shaped component, can provide more freedom in optical design, optimize the structure of the optical system, and improve its performance. However, the difficulties involved in the measurement of free-form elements restrict their manufacture and application. A tilted-wave-interferometer (TWI) can achieve high precision in free-form surface measurement, but it requires higher space attitude error control. We analyze the relation between the alignment error and the measurement error introduced by the misalignment in free-form surface metrology with TWI. The attitude control method in the rotation direction is proposed based on the moire fringe technique. Then, combining it with the five-dimensional space attitude control method of aspherical elements, we put forward an alignment error control process in measuring the free-form surface. An experiment of measuring a free-form surface using TWI shows the effectiveness of our method.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Jia Li, Hua Shen, and Rihong Zhu "Method of alignment error control in free-form surface metrology with the tilted-wave-interferometer," Optical Engineering 55(4), 044101 (7 April 2016). https://doi.org/10.1117/1.OE.55.4.044101
Published: 7 April 2016
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Moire patterns

Optical alignment

Error control coding

Metrology

Photovoltaics

Error analysis

Optical components

Back to Top