21 April 2017 Depth image upsampler using pixel selection based on selective weight function
Author Affiliations +
We propose an image upsampling algorithm to increase the depth image resolution while preserving edge information and protecting from the texture copy problem. The proposed upsampler selectively combines the spatial, depth range, and color range weight functions for cost calculation according to the weight selection algorithm. In particular, a color range weight function is proposed to reduce the texture copy problem caused by distinct patterns in the color image. Simulation results show that the proposed algorithm outperforms other conventional upsamplers.



Resolution of a depth image captured by a three-dimensional (3-D) camera for depth sensing is generally lower than its corresponding color image for 3-D video applications. In addition, an advanced 3-D TV system transmits low-resolution depth images to make the best use of a transmission bandwidth. For practical purposes, an efficient depth image upsampling algorithm is necessary to adjust the resolution between depth and color images.

There are a number of depth image upsamplers. The bilinear interpolator and bicubic interpolator can be directly used for depth image upsampling. These interpolators generate good results in smooth regions, but make noise looked like the shape of staircase in the edge. To remove the staircase noise, some depth image upsamplers based on weight functions have been introduced.12.3 These studies show positive results for staircase noise, but generate the drawback of texture copy problem caused by a distinct color pattern. In this paper, we propose a depth image upsampling algorithm to overcome these problems, such as staircase noise and texture copy problem. The proposed algorithm suggests an effective weight choice method and a color weight function.


Joint Bilateral Filter

To increase the sampling rate of a depth image, Kopf et al.1 have developed a joint bilateral upsampler (JBU) by extending the idea of a joint bilateral filter based on weight functions. Suppose that there are a low-resolution depth image Dl and a high-resolution color image Ih. Let (p,q) and (p,q) denote the pixel coordinates in the low-resolution image and the high-resolution image, respectively. p is the center of the local neighborhood N(p) and q is the neighboring pixel location of p.

The depth value Dph at p in an upsampled depth image Dh is calculated by a normalized weighted sum, which is expressed as


where fs and fr are the spatial and range weighting functions, respectively. The fs and fr are modeled by the exponential function as follows:


where · is a Euclidean distance operator. δs and δr are the smoothing parameters of fs and fr, respectively.


Proposed Depth Image Upsampler

To get an upsampled depth image while keeping the shape of the edge without staircase noise, the previous works12.3 define the color weight function and take advantage of the color information under the assumption that depth and color images have similar characteristics. However, the use of color weight occasionally causes an unexpected depth in smooth areas when a distinct pattern is in the color image. This phenomenon is called texture copy problem. To reduce the texture copy problem, we propose a weight selection algorithm that selectively applies a range weight function for cost calculation: color range weight function or depth range weight function. In addition, we define a color range weight function based on Laplacian distribution to utilize the color information more effectively.

Figure 1 shows the overall flow of the proposed upsampler. First, a low-resolution depth image Dl is upsampled by a bicubic interpolation algorithm and the upsampled high-resolution depth image is denoted by Bh. Then, all pixels in the upsampled depth image Bh should be tested by weight selection algorithm whether the pixel belongs to a distinct color pattern or not. Next, the cost values between the center pixel and the surrounding pixels are calculated based on spatial and range weight functions. Finally, when the candidate pixel at qx has the minimum cost among the nine candidates, the depth value Dph at p is replaced by the depth value Bqxh at qx.

Fig. 1

Overall flow of the proposed upsampler.


After obtaining the upsampled depth image Bh by the bicubic interpolation algorithm, we perform the weight selection algorithm for all pixels, as shown in Fig. 2. If we detect a distinct color pattern in a color image, we do not use the color image information to avoid the texture copy problem. To detect a distinct color pattern, we compare the mean of absolute difference (MAD) of the color image and that of the depth image. The MAD of the color image at p and the MAD of the depth image are denoted as MADpc and MADpd and calculated as


Then we calculate the absolute difference (AD) between MADpc and MADpd


If the predefined difference threshold Td is bigger than ADp, we can expect that the color texture problem will not happen because there is no big differences between neighboring pixels in the color image. In this case, we use a color range weight function for cost calculation. If Td is smaller than ADp, we select a depth range weight function to remove the effects of the color image.

Fig. 2

Weight selection algorithm.


Figure 3 shows the pixel position for cost calculation and weight function. The cost Cp,q at q with respect to p is calculated as


Cp,q={RWq,r·|BphBqh|if  |BphBqh|1RWq,rotherwise,


RWq,r={rN(q)fφ(q,r)·fψ(q,r)if  ADp<TdrN(q)fφ(q,r)·fω(q,r)otherwise.
The region weight RWq,r is a weighted sum of spatial and range weight functions between q and its neighbor rN(q). To calculate the value of the region weight, we use the result of weight selection algorithm. In the equation below , the spatial weight function fφ and the depth range weight function fω are modeled as a simplified Gaussian function


where δφ and δω are the smoothing parameters of fφ and fω, respectively. However, unlike predefined weight functions, a color range weight function fψ is modeled as a simplified Laplacian function to reduce the effect of color information. The Laplacian function is narrower and sharper than the Gaussian function. It is also expressed by an exponential function


where δψ is the smoothing parameter of fψ.

Fig. 3

Candidate pixels for cost calculation.


After calculating each cost of all nine candidates, we find the minimum cost among these nine candidates. Minimum cost pixel qx is represented as


Finally, Dph is replaced with a pixel Bqxh generating the minimum cost




Simulation Results

To evaluate the performance of the depth image upsampling algorithm, we performed computer simulations on various images having ground truth depth data. To generate input 8-bit low-resolution depth images, each ground truth depth image is downsampled by a factor of 2 and 4. The performance of the proposed algorithm was compared to the JBU,1 joint trilateral upsampler (JTU),2 and fast edge preserving depth upsampler (FEDU)3 in terms of peak signal-to-noise ratio (PSNR) and subjective visual quality. In the simulation, the cost function parameters were set by q3×3, r3×3, Td=50, δφ=2, δψ=0.1, and δω=0.1.

Tables 1 and 2 show the results of PSNR comparison. When the upsampling factor is 2, the proposed upsampler has higher PSNRs by as much as about 11.11, 11.3, and 2.54 dB than JBU,1 JTU,2 and FEDU3 on average, respectively. When the upsampling factor is 4, the PSNR gains of the proposed algorithm are 6.57, 4.21, and 2.65 dB higher than JBU,1 JTU,2 and FEDU3 on average, respectively.

Table 1

PSNR comparison (unit: dB and upsampling factor: 2).

Test imageJBU1JTU2FEDU3Proposed
Average PSNR29.4229.2337.9940.53

Table 2

PSNR comparison (unit: dB and upsampling factor: 4).

Test imageJBU1JTU2FEDU3Proposed
Average PSNR31.4233.7835.3437.99

As shown in Figs. 4 and 5, the excellence of the proposed algorithm is also demonstrated by a subjective visual quality test. The first image is the color image and the region of interest is marked by a red box. (a), (b), and (c) are the results of JBU, FEDU, and the proposed algorithm, respectively. Sawtooth and art are upsampled by 4 and 2. From the result of JBU in Fig. 4(a), the staircase distortion is observed. FEDU3 reduces the staircase distortion. but there remain blurring artifacts in the sharp edge as shown in Fig. 4(b). However, the proposed algorithm generates a sharp edge without blurring artifacts. In addition, we can see the reduced texture copy problem in Fig. 5(c) compared to the result of JBU in Fig. 5(a).

Fig. 4

Subjective visual quality tests of sawtooth (×4): (a) original color image, (b) JBU, (c) JTU, and (d) FEDU.


Fig. 5

Subjective visual quality tests of art (×2): (a) original color image, (b) JBU, (c) JTU, and (d) FEDU.




A depth image upsampler has been proposed to preserve edge information and reduce the texture copy problem. To achieve the goal, we introduced the weight selection algorithm and the color range weight function based on a Laplacian distribution model. Computer simulations were performed on various test images to show the superiority of the proposed algorithm. The simulation results demonstrate that the proposed scheme has advantages in terms of PSNR and subjective visual quality. As a result, the increased upsampled depth image quality can lead to an improvement in the virtual view synthesis and multiview 3-D videos.


This research was supported by the Basic Science Research Program through the National Research Foundation of Korea funded by the Ministry of Education (No. 2014R1A1A2057662) and research projects of “The Development of Security and Safety Systems based on Ubiquitous Technology for Shipping and Logistics.”


1. J. Kopf et al., “Joint bilateral upsampling,” ACM Trans. Graphics 26(3), 1–6 (2007).ATGRDF0730-0301 http://dx.doi.org/10.1145/1276377 Google Scholar

2. Y. Li et al., “Depth map super-resolution via iterative joint trilateral upsampling,” in IEEE Conf. on Visual Communications and Image Processing, pp. 386–389 (2014). http://dx.doi.org/10.1109/VCIP.2014.7051587 Google Scholar

3. S. Y. Kim and Y. S. Ho, “Fast edge-preserving depth image upsampler,” IEEE Trans. Consum. Electron. 58(3), 971–977 (2012).ITCEDA0098-3063 http://dx.doi.org/10.1109/TCE.2012.6311344 Google Scholar

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.
Soo-Yeon Shin, Soo-Yeon Shin, Jae-Won Suh, Jae-Won Suh, } "Depth image upsampler using pixel selection based on selective weight function," Optical Engineering 56(4), 040503 (21 April 2017). https://doi.org/10.1117/1.OE.56.4.040503 . Submission: Received: 16 February 2017; Accepted: 7 April 2017
Received: 16 February 2017; Accepted: 7 April 2017; Published: 21 April 2017


Efficient dense blur map estimation for automatic 2D to 3D...
Proceedings of SPIE (February 28 2012)
Subjective evaluation of JPEG XR image compression
Proceedings of SPIE (September 02 2009)

Back to Top