24 April 2018 Design of free-space optical transmission system in computer tomography equipment
Min Liu, Weiwei Fu, Tao Zhang
Author Affiliations +
Abstract
Traditional computer tomography (CT) based on capacitive coupling cannot satisfy the high data rate transmission requirement. We design and experimentally demonstrate a free-space optical transmission system for CT equipment at a data rate of 10  Gb  /  s. Two interchangeable sections of 12 pieces of fiber with equal length is fabricated and tested by our designed laser phase distance measurement system. By locating the 12 collimators in the edge of the circle wheel evenly, the optical propagation characteristics for the 12 wired and wireless paths are similar, which can satisfy the requirement of high-speed CT transmission system. After bit error rate (BER) measurement in several conditions, the BER performances are below the value of 10  −  11, which has the potential in the future application scenario of CT equipment.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2018/$25.00 © 2018 SPIE
Min Liu, Weiwei Fu, and Tao Zhang "Design of free-space optical transmission system in computer tomography equipment," Optical Engineering 57(4), 046110 (24 April 2018). https://doi.org/10.1117/1.OE.57.4.046110
Received: 21 October 2017; Accepted: 4 April 2018; Published: 24 April 2018
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computed tomography

Optical design

Transmittance

Computing systems

Distance measurement

Tomography

Collimators

Back to Top